Setting this table causes RIP to select inbound
update information about a specific network or
host. This table allows the network administrator
to limit RIP's scope for inbound processing.
Outbound processing is not affected by this table.
If the rRipLsnType for this destination is set to
LISTEN, RIP will use updates received from the
specified gateways only. If the rRipLsnType is
set to DO_NOT_LISTEN, RIP will discard updates
received from the specified gateways and process
all others. If the value of rRipLsnType is
changed, this table is cleared. This table is
maintained on a per destination basis. If the
table is empty, it is assumed that all gateways
are LISTEN for all destination addresses. This
is also the default setting. To change the state
of an entry in this table from LISTEN to
DO_NOT_LISTEN or vice versa, change the rRipLsnType
for the destination address and then define the
new restriction list for that address.
Parsed from file fibr_FX8210B.mib.txt
Company: None
Module: FIBRONICS-PROPRIETARY-FX8210-B-MIB
Setting this table causes RIP to select inbound
update information about a specific network or
host. This table allows the network administrator
to limit RIP's scope for inbound processing.
Outbound processing is not affected by this table.
If the rRipLsnType for this destination is set to
LISTEN, RIP will use updates received from the
specified gateways only. If the rRipLsnType is
set to DO-NOT-LISTEN, RIP will discard updates
received from the specified gateways and process
all others. If the value of rRipLsnType is
changed, this table is cleared. This table is
maintained on a per destination basis. If the
table is empty, it is assumed that all gateways
are LISTEN for all destination addresses. This
is also the default setting. To change the state
of an entry in this table from LISTEN to
DO-NOT-LISTEN or vice versa, change the rRipLsnType
for the destination address and then define the
new restriction list for that address.
Parsed from file FIBRONICS-PROPRIETARY-FX8210-B-MIB.mib
Module: FIBRONICS-PROPRIETARY-FX8210-B-MIB
Vendor: Fibronics
Module: FIBRONICS-PROPRIETARY-FX8210-B-MIB
[Automatically extracted from oidview.com]
rRipLsnTable OBJECT-TYPE SYNTAX SEQUENCE OF RRipLsnEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Setting this table causes RIP to select inbound update information about a specific network or host. This table allows the network administrator to limit RIP's scope for inbound processing. Outbound processing is not affected by this table. If the rRipLsnType for this destination is set to LISTEN, RIP will use updates received from the specified gateways only. If the rRipLsnType is set to DO_NOT_LISTEN, RIP will discard updates received from the specified gateways and process all others. If the value of rRipLsnType is changed, this table is cleared. This table is maintained on a per destination basis. If the table is empty, it is assumed that all gateways are LISTEN for all destination addresses. This is also the default setting. To change the state of an entry in this table from LISTEN to DO_NOT_LISTEN or vice versa, change the rRipLsnType for the destination address and then define the new restriction list for that address." ::= { propIpRun 10 }
rRipLsnTable OBJECT-TYPE SYNTAX SEQUENCE OF RRipLsnEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Setting this table causes RIP to select inbound update information about a specific network or host. This table allows the network administrator to limit RIP's scope for inbound processing. Outbound processing is not affected by this table. If the rRipLsnType for this destination is set to LISTEN, RIP will use updates received from the specified gateways only. If the rRipLsnType is set to DO-NOT-LISTEN, RIP will discard updates received from the specified gateways and process all others. If the value of rRipLsnType is changed, this table is cleared. This table is maintained on a per destination basis. If the table is empty, it is assumed that all gateways are LISTEN for all destination addresses. This is also the default setting. To change the state of an entry in this table from LISTEN to DO-NOT-LISTEN or vice versa, change the rRipLsnType for the destination address and then define the new restriction list for that address." ::= { propIpRun 10 }
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.22.6.1.10.1 | rRipLsnEntry | 3 | 3 | The list of fields needed to support the rRipLsnTable. |
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.22.6.1.1 | rIpMaskTable | 1 | 4 | The list of address masks used by this router for determining its subnets. |
1.3.6.1.4.1.22.6.1.2 | rIpOurAddrTable | 1 | 5 | Proprietary extensions for the rfc1156 defined ipAddrTable. |
1.3.6.1.4.1.22.6.1.3 | rIpIfTable | 1 | 4 | rIpIftable |
1.3.6.1.4.1.22.6.1.4 | rDftGw | 1 | 1 | The IP address of the default gateway. |
1.3.6.1.4.1.22.6.1.5 | rIpAtTable | 1 | 3 | Proprietary extensions for the rfc1156 defined atTable. |
1.3.6.1.4.1.22.6.1.6 | rIpRtTable | 1 | 2 | Proprietary extensions for the rfc1156 defined ipRoutingTable. |
1.3.6.1.4.1.22.6.1.7 | rRipTrInd | 1 | 1 | This flag indicates whether the rRipTrustTable is used to list trusted or not-trusted gateways. When the state is changed, all ex… |
1.3.6.1.4.1.22.6.1.8 | rRipTrustTable | 1 | 3 | This table has 2 possible meanings depending on the value of rRipTrInd. These 2 configuration options allow the network administ… |
1.3.6.1.4.1.22.6.1.9 | rRipLsnIndTable | 1 | 3 | The rRipLsnIndTable contains the flags that indicate the type of listen restriction that is active for a given destination addres… |
1.3.6.1.4.1.22.6.1.11 | rRipAnncIndTable | 1 | 3 | The rRipAnncIndTable contains the flags that indicate the type of announce restriction(s) that are active for each (sub)network s… |
1.3.6.1.4.1.22.6.1.12 | rRipAnncTable | 1 | 4 | Setting this table causes RIP to taylor its update announcements. This table allows the network administrator to limit RIP's sco… |
1.3.6.1.4.1.22.6.1.13 | rRipSrcTable | 1 | 4 | Setting this table causes RIP broadcasting to be shut off by indicating which gateways should receive directed RIP information. … |
1.3.6.1.4.1.22.6.1.14 | rIpRtEvTable | 1 | 4 | Table containing the status of each routing event supported in the brouter. |
1.3.6.1.4.1.22.6.1.15 | rIpRipStats | 8 | 16 | None |
1.3.6.1.4.1.22.6.1.16 | rIpArpStats | 12 | 24 | None |
1.3.6.1.4.1.22.6.1.17 | rIpPArp | 7 | 14 | None |