Setting this table causes RIP to taylor its
update announcements. This table allows the
network administrator to limit RIP's scope for
outbound processing. Inbound processing is not
affected by this table. If the rRipAnncType
is set to ANNOUNCE, RIP will adjust its outbound
announcments on the indicated (sub)network by
propogating announcements for those gateways
listed in the rRipAnncTable only. All
announcements for gateways not on the ANNOUNCE
list will not be sent over the associated
(sub)network. If the rRipAnncType is set to
DO_NOT_ANNOUNCE, RIP will adjust its outbound
announcements on the indicated (sub)network by
not propogating announcements for those gateways
listed in the rRipAnncTable. All other
announcements will be propogated on the indicated
(sub)network. If the value of ripAnncType is
changed, this table is cleared. This table is
maintained on a per (sub)network basis. If the
table is empty, it is assumed that all gateways
on all (sub)networks are ANNOUNCE. This is also
the default state. To change the state of an
entry from ANNOUNCE to DO_NOT_ANNOUNCE or vice
versa, change the rRipAnncType in the
ripAnncIndTable for the (sub)network and then
define the new restriction list for the
(sub)network. Please note that before any
entries can be defined here or in the
rRipAnncIndTable, the (sub)network must be
defined to the router via an ipAddrEntry.
Parsed from file fibr_FX8210B.mib.txt
Company: None
Module: FIBRONICS-PROPRIETARY-FX8210-B-MIB
Setting this table causes RIP to taylor its
update announcements. This table allows the
network administrator to limit RIP's scope for
outbound processing. Inbound processing is not
affected by this table. If the rRipAnncType
is set to ANNOUNCE, RIP will adjust its outbound
announcments on the indicated (sub)network by
propogating announcements for those gateways
listed in the rRipAnncTable only. All
announcements for gateways not on the ANNOUNCE
list will not be sent over the associated
(sub)network. If the rRipAnncType is set to
DO-NOT-ANNOUNCE, RIP will adjust its outbound
announcements on the indicated (sub)network by
not propogating announcements for those gateways
listed in the rRipAnncTable. All other
announcements will be propogated on the indicated
(sub)network. If the value of ripAnncType is
changed, this table is cleared. This table is
maintained on a per (sub)network basis. If the
table is empty, it is assumed that all gateways
on all (sub)networks are ANNOUNCE. This is also
the default state. To change the state of an
entry from ANNOUNCE to DO-NOT-ANNOUNCE or vice
versa, change the rRipAnncType in the
ripAnncIndTable for the (sub)network and then
define the new restriction list for the
(sub)network. Please note that before any
entries can be defined here or in the
rRipAnncIndTable, the (sub)network must be
defined to the router via an ipAddrEntry.
Parsed from file FIBRONICS-PROPRIETARY-FX8210-B-MIB.mib
Module: FIBRONICS-PROPRIETARY-FX8210-B-MIB
Vendor: Fibronics
Module: FIBRONICS-PROPRIETARY-FX8210-B-MIB
[Automatically extracted from oidview.com]
rRipAnncTable OBJECT-TYPE SYNTAX SEQUENCE OF RRipAnncEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Setting this table causes RIP to taylor its update announcements. This table allows the network administrator to limit RIP's scope for outbound processing. Inbound processing is not affected by this table. If the rRipAnncType is set to ANNOUNCE, RIP will adjust its outbound announcments on the indicated (sub)network by propogating announcements for those gateways listed in the rRipAnncTable only. All announcements for gateways not on the ANNOUNCE list will not be sent over the associated (sub)network. If the rRipAnncType is set to DO_NOT_ANNOUNCE, RIP will adjust its outbound announcements on the indicated (sub)network by not propogating announcements for those gateways listed in the rRipAnncTable. All other announcements will be propogated on the indicated (sub)network. If the value of ripAnncType is changed, this table is cleared. This table is maintained on a per (sub)network basis. If the table is empty, it is assumed that all gateways on all (sub)networks are ANNOUNCE. This is also the default state. To change the state of an entry from ANNOUNCE to DO_NOT_ANNOUNCE or vice versa, change the rRipAnncType in the ripAnncIndTable for the (sub)network and then define the new restriction list for the (sub)network. Please note that before any entries can be defined here or in the rRipAnncIndTable, the (sub)network must be defined to the router via an ipAddrEntry." ::= { propIpRun 12 }
rRipAnncTable OBJECT-TYPE SYNTAX SEQUENCE OF RRipAnncEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Setting this table causes RIP to taylor its update announcements. This table allows the network administrator to limit RIP's scope for outbound processing. Inbound processing is not affected by this table. If the rRipAnncType is set to ANNOUNCE, RIP will adjust its outbound announcments on the indicated (sub)network by propogating announcements for those gateways listed in the rRipAnncTable only. All announcements for gateways not on the ANNOUNCE list will not be sent over the associated (sub)network. If the rRipAnncType is set to DO-NOT-ANNOUNCE, RIP will adjust its outbound announcements on the indicated (sub)network by not propogating announcements for those gateways listed in the rRipAnncTable. All other announcements will be propogated on the indicated (sub)network. If the value of ripAnncType is changed, this table is cleared. This table is maintained on a per (sub)network basis. If the table is empty, it is assumed that all gateways on all (sub)networks are ANNOUNCE. This is also the default state. To change the state of an entry from ANNOUNCE to DO-NOT-ANNOUNCE or vice versa, change the rRipAnncType in the ripAnncIndTable for the (sub)network and then define the new restriction list for the (sub)network. Please note that before any entries can be defined here or in the rRipAnncIndTable, the (sub)network must be defined to the router via an ipAddrEntry." ::= { propIpRun 12 }
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.22.6.1.12.1 | rRipAnncEntry | 3 | 3 | The list of fields needed to support the rRipAnncTable. |
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.22.6.1.1 | rIpMaskTable | 1 | 4 | The list of address masks used by this router for determining its subnets. |
1.3.6.1.4.1.22.6.1.2 | rIpOurAddrTable | 1 | 5 | Proprietary extensions for the rfc1156 defined ipAddrTable. |
1.3.6.1.4.1.22.6.1.3 | rIpIfTable | 1 | 4 | rIpIftable |
1.3.6.1.4.1.22.6.1.4 | rDftGw | 1 | 1 | The IP address of the default gateway. |
1.3.6.1.4.1.22.6.1.5 | rIpAtTable | 1 | 3 | Proprietary extensions for the rfc1156 defined atTable. |
1.3.6.1.4.1.22.6.1.6 | rIpRtTable | 1 | 2 | Proprietary extensions for the rfc1156 defined ipRoutingTable. |
1.3.6.1.4.1.22.6.1.7 | rRipTrInd | 1 | 1 | This flag indicates whether the rRipTrustTable is used to list trusted or not-trusted gateways. When the state is changed, all ex… |
1.3.6.1.4.1.22.6.1.8 | rRipTrustTable | 1 | 3 | This table has 2 possible meanings depending on the value of rRipTrInd. These 2 configuration options allow the network administ… |
1.3.6.1.4.1.22.6.1.9 | rRipLsnIndTable | 1 | 3 | The rRipLsnIndTable contains the flags that indicate the type of listen restriction that is active for a given destination addres… |
1.3.6.1.4.1.22.6.1.10 | rRipLsnTable | 1 | 4 | Setting this table causes RIP to select inbound update information about a specific network or host. This table allows the netwo… |
1.3.6.1.4.1.22.6.1.11 | rRipAnncIndTable | 1 | 3 | The rRipAnncIndTable contains the flags that indicate the type of announce restriction(s) that are active for each (sub)network s… |
1.3.6.1.4.1.22.6.1.13 | rRipSrcTable | 1 | 4 | Setting this table causes RIP broadcasting to be shut off by indicating which gateways should receive directed RIP information. … |
1.3.6.1.4.1.22.6.1.14 | rIpRtEvTable | 1 | 4 | Table containing the status of each routing event supported in the brouter. |
1.3.6.1.4.1.22.6.1.15 | rIpRipStats | 8 | 16 | None |
1.3.6.1.4.1.22.6.1.16 | rIpArpStats | 12 | 24 | None |
1.3.6.1.4.1.22.6.1.17 | rIpPArp | 7 | 14 | None |