Setting this table causes RIP broadcasting to be
shut off by indicating which gateways should
receive directed RIP information. No broadcast
RIP update massages will be sent on the specified
network. This table allows the network
administrator to limit RIP's scope for outbound
processing. Inbound processing is not affected
by this table. As stated above, this table is
maintained on a per (sub)network basis. If the
table is empty, it is assumed that all gateways
are to receive updates, i.e. broadcast is turned
on. The default is broadcast all updates on all
(sub)networks. Please note that before any
entries can be defined here, the (sub)network
must be defined to the router via an ipAddrEntry.
Parsed from file fibr_FX8210B.mib.txt
Company: None
Module: FIBRONICS-PROPRIETARY-FX8210-B-MIB
Setting this table causes RIP broadcasting to be
shut off by indicating which gateways should
receive directed RIP information. No broadcast
RIP update massages will be sent on the specified
network. This table allows the network
administrator to limit RIP's scope for outbound
processing. Inbound processing is not affected
by this table. As stated above, this table is
maintained on a per (sub)network basis. If the
table is empty, it is assumed that all gateways
are to receive updates, i.e. broadcast is turned
on. The default is broadcast all updates on all
(sub)networks. Please note that before any
entries can be defined here, the (sub)network
must be defined to the router via an ipAddrEntry.
Parsed from file FIBRONICS-PROPRIETARY-FX8210-B-MIB.mib
Module: FIBRONICS-PROPRIETARY-FX8210-B-MIB
Vendor: Fibronics
Module: FIBRONICS-PROPRIETARY-FX8210-B-MIB
[Automatically extracted from oidview.com]
rRipSrcTable OBJECT-TYPE SYNTAX SEQUENCE OF RRipSrcEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Setting this table causes RIP broadcasting to be shut off by indicating which gateways should receive directed RIP information. No broadcast RIP update massages will be sent on the specified network. This table allows the network administrator to limit RIP's scope for outbound processing. Inbound processing is not affected by this table. As stated above, this table is maintained on a per (sub)network basis. If the table is empty, it is assumed that all gateways are to receive updates, i.e. broadcast is turned on. The default is broadcast all updates on all (sub)networks. Please note that before any entries can be defined here, the (sub)network must be defined to the router via an ipAddrEntry." ::= { propIpRun 13 }
rRipSrcTable OBJECT-TYPE SYNTAX SEQUENCE OF RRipSrcEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Setting this table causes RIP broadcasting to be shut off by indicating which gateways should receive directed RIP information. No broadcast RIP update massages will be sent on the specified network. This table allows the network administrator to limit RIP's scope for outbound processing. Inbound processing is not affected by this table. As stated above, this table is maintained on a per (sub)network basis. If the table is empty, it is assumed that all gateways are to receive updates, i.e. broadcast is turned on. The default is broadcast all updates on all (sub)networks. Please note that before any entries can be defined here, the (sub)network must be defined to the router via an ipAddrEntry." ::= { propIpRun 13 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.22.6.1.13.1 | rRipSrcEntry | 3 | 3 | The list of fields needed to support the rRipSrcTable. |
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.22.6.1.1 | rIpMaskTable | 1 | 4 | The list of address masks used by this router for determining its subnets. |
| 1.3.6.1.4.1.22.6.1.2 | rIpOurAddrTable | 1 | 5 | Proprietary extensions for the rfc1156 defined ipAddrTable. |
| 1.3.6.1.4.1.22.6.1.3 | rIpIfTable | 1 | 4 | rIpIftable |
| 1.3.6.1.4.1.22.6.1.4 | rDftGw | 1 | 1 | The IP address of the default gateway. |
| 1.3.6.1.4.1.22.6.1.5 | rIpAtTable | 1 | 3 | Proprietary extensions for the rfc1156 defined atTable. |
| 1.3.6.1.4.1.22.6.1.6 | rIpRtTable | 1 | 2 | Proprietary extensions for the rfc1156 defined ipRoutingTable. |
| 1.3.6.1.4.1.22.6.1.7 | rRipTrInd | 1 | 1 | This flag indicates whether the rRipTrustTable is used to list trusted or not-trusted gateways. When the state is changed, all ex… |
| 1.3.6.1.4.1.22.6.1.8 | rRipTrustTable | 1 | 3 | This table has 2 possible meanings depending on the value of rRipTrInd. These 2 configuration options allow the network administ… |
| 1.3.6.1.4.1.22.6.1.9 | rRipLsnIndTable | 1 | 3 | The rRipLsnIndTable contains the flags that indicate the type of listen restriction that is active for a given destination addres… |
| 1.3.6.1.4.1.22.6.1.10 | rRipLsnTable | 1 | 4 | Setting this table causes RIP to select inbound update information about a specific network or host. This table allows the netwo… |
| 1.3.6.1.4.1.22.6.1.11 | rRipAnncIndTable | 1 | 3 | The rRipAnncIndTable contains the flags that indicate the type of announce restriction(s) that are active for each (sub)network s… |
| 1.3.6.1.4.1.22.6.1.12 | rRipAnncTable | 1 | 4 | Setting this table causes RIP to taylor its update announcements. This table allows the network administrator to limit RIP's sco… |
| 1.3.6.1.4.1.22.6.1.14 | rIpRtEvTable | 1 | 4 | Table containing the status of each routing event supported in the brouter. |
| 1.3.6.1.4.1.22.6.1.15 | rIpRipStats | 8 | 16 | None |
| 1.3.6.1.4.1.22.6.1.16 | rIpArpStats | 12 | 24 | None |
| 1.3.6.1.4.1.22.6.1.17 | rIpPArp | 7 | 14 | None |