The current numeric value of the sensor. The interpretation of this
value is related to the type of sensor.
Fan sensor values are reported in rpms (revolutions per minute).
Voltage sensor values are reported in millivolts.
A value of 3300 means 3.3 volts.
Temperature sensor values are reported as hundreths of Celsius degrees.
A value of 2500 means 25.0 degrees.
Parsed from file VisiNet2_mib.txt
Company: None
Module: VISINET2-MIB
The current numeric value of the sensor. The interpretation of this
value is related to the type of sensor.
Fan sensor values are reported in rpms (revolutions per minute).
Voltage sensor values are reported in millivolts.
A value of 3300 means 3.3 volts.
Temperature sensor values are reported as hundreths of Celsius degrees.
A value of 2500 means 25.0 degrees.
Parsed from file VISINET2-MIB.mib
Module: VISINET2-MIB
Vendor: Unisys_Corp
Module: VISINET2-MIB
[Automatically extracted from oidview.com]
uemSensorValue OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The current numeric value of the sensor. The interpretation of this value is related to the type of sensor. Fan sensor values are reported in rpms (revolutions per minute). Voltage sensor values are reported in millivolts. A value of 3300 means 3.3 volts. Temperature sensor values are reported as hundreths of Celsius degrees. A value of 2500 means 25.0 degrees." ::= { uemSensorTableEntry 6 }
uemSensorValue OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The current numeric value of the sensor. The interpretation of this value is related to the type of sensor. Fan sensor values are reported in rpms (revolutions per minute). Voltage sensor values are reported in millivolts. A value of 3300 means 3.3 volts. Temperature sensor values are reported as hundreths of Celsius degrees. A value of 2500 means 25.0 degrees." ::= { uemSensorTableEntry 6 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.223.10.6.17.1.1 | uemSensorIndex | 0 | 0 | A unique value for each sensor in the monitored system. Note: if there are multiple environmental monitoring cards in a system, a… |
| 1.3.6.1.4.1.223.10.6.17.1.2 | uemSensorEnvMonIndex | 0 | 0 | A link into the EnvMonitor device table. This identifies which environmental device is managing this sensor. |
| 1.3.6.1.4.1.223.10.6.17.1.3 | uemSensorType | 0 | 0 | The general classification of this sensor. |
| 1.3.6.1.4.1.223.10.6.17.1.4 | uemSensorDescription | 0 | 0 | Text describing this sensor. |
| 1.3.6.1.4.1.223.10.6.17.1.5 | uemSensorStatus | 0 | 0 | The current state of the sensor. |
| 1.3.6.1.4.1.223.10.6.17.1.7 | uemSensorNominalValue | 0 | 0 | This is the normal value expected to be reported by this sensor in a properly operating system. |
| 1.3.6.1.4.1.223.10.6.17.1.8 | uemSensorHighCriticalValue | 0 | 0 | When the sensor exceeds this value, a critical trap is sent. When appropriate, this test point can be disabled by setting it to t… |
| 1.3.6.1.4.1.223.10.6.17.1.9 | uemSensorHighCriticalLabel | 0 | 0 | Text describing this test point. |
| 1.3.6.1.4.1.223.10.6.17.1.10 | uemSensorHighWarningValue | 0 | 0 | When the sensor value exceeds this value, a warning trap is sent. This test point is disabled by setting it to the same value as… |
| 1.3.6.1.4.1.223.10.6.17.1.11 | uemSensorHighWarningLabel | 0 | 0 | Text describing this test point. |
| 1.3.6.1.4.1.223.10.6.17.1.12 | uemSensorLowWarningValue | 0 | 0 | When the sensor value goes below this value, a warning trap is sent. This test point can be disabled by setting it to the same v… |
| 1.3.6.1.4.1.223.10.6.17.1.13 | uemSensorLowWarningLabel | 0 | 0 | Text describing this test point. |
| 1.3.6.1.4.1.223.10.6.17.1.14 | uemSensorLowCriticalValue | 0 | 0 | When the sensor goes below this value, a critical trap is sent. This test point can be disabled by setting it to zero. |
| 1.3.6.1.4.1.223.10.6.17.1.15 | uemSensorLowCriticalLabel | 0 | 0 | Text describing this test point. |
| 1.3.6.1.4.1.223.10.6.17.1.16 | uemSensorEnabled | 0 | 0 | If this field is FALSE, the sensor is disabled. No traps will be sent from a disabled sensor. |