DNS Host table.
Parsed from file rapid_city-accelar.mib.txt
Company: rapidcity
Module: RAPID-CITY
rcSysDnsHostTable OBJECT-TYPE SYNTAX SEQUENCE OF RcSysDnsHostEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "DNS Host table." ::= { rcSystem 65 }
Vendor: Avaya
Module: RAPID-CITY (RAPID-CITY.mib)
Type: TABLE
Access: not-accessible
Syntax: SEQUENCE OF
Automatically extracted from www.mibdepot.com
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.2272.1.1.65.1 | rcSysDnsHostEntry | 6 | 6 | table entry. |
To many brothers! Only 100 nearest brothers are shown.
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| ... | ||||
| 1.3.6.1.4.1.2272.1.1.15 | rcSysBufferUtilPeakTime | 1 | 1 | Timestamp for rcSysPeakBandwidth |
| 1.3.6.1.4.1.2272.1.1.16 | rcSysNVRamSize | 1 | 1 | Total Non-volatile RAM in Kbytes |
| 1.3.6.1.4.1.2272.1.1.17 | rcSysNVRamUsed | 1 | 1 | Non-volatile RAM in use in Kbytes |
| 1.3.6.1.4.1.2272.1.1.18 | rcSysLastSaveToNVRam | 1 | 1 | SysUpTime of the last time when NVRAM was written to. This could be a save of the system configuration or via a file transfer of… |
| 1.3.6.1.4.1.2272.1.1.19 | rcSysLastSaveToStandbyNVRam | 1 | 1 | SysUpTime of the last time when the standby NVRAM (on the back-up CPU board) was written to. |
| 1.3.6.1.4.1.2272.1.1.20 | rcSysCpuUtil | 1 | 1 | Percentage of CPU utilization |
| 1.3.6.1.4.1.2272.1.1.21 | rcSysSwitchFabricUtil | 1 | 1 | Percentage of Switching Fabric utilization |
| 1.3.6.1.4.1.2272.1.1.22 | rcSysRmonMemSize | 1 | 1 | Amount of RAM in bytes to allocate for RMON to use when rcSysRmonEnable is TRUE. |
| 1.3.6.1.4.1.2272.1.1.23 | rcSysRmonEnable | 1 | 1 | Control whether the RMON feature should be enabled. To enable the RMON feature, set this variable to true. The RMON agent in the … |
| 1.3.6.1.4.1.2272.1.1.24 | rcSysRmonSaveConfig | 1 | 1 | Control whether RMON configuration information should be saved to NVRAM so RMON settings can be automatically reinstalled after a… |
| 1.3.6.1.4.1.2272.1.1.25 | rcSysRmonTrapOption | 1 | 1 | Used to indicate whether RMON traps should be sent to only the owner of the RMON alarm (i.e., the manager that created the alarm … |
| 1.3.6.1.4.1.2272.1.1.26 | rcSysSupportRouting | 1 | 1 | Used to indicate whether routing is supported in this product. |
| 1.3.6.1.4.1.2272.1.1.27 | rcSysSupportWebServer | 1 | 1 | Used to indicate whether WebServer is supported in this product. |
| 1.3.6.1.4.1.2272.1.1.28 | rcSysLastIpAddrChange | 1 | 1 | Last management initiated IP address change since sysUpTime. Any addition or deletion of an IP address to a single routable port… |
| 1.3.6.1.4.1.2272.1.1.29 | rcSysCommReadWriteLayer3 | 1 | 1 | When an SNMP message is received by this entity, the community string in the message is compared with this string third. If it m… |
| 1.3.6.1.4.1.2272.1.1.30 | rcSysCommReadWriteLayer2 | 1 | 1 | When an SNMP message is received by this entity, the community string in the message is compared with this string fourth. If it … |
| 1.3.6.1.4.1.2272.1.1.31 | rcSysAccessPolicyEnable | 1 | 1 | Used to configure the system access policy feature. if 'true', the rcSysAccessPolicyTable is examined to determine which packets … |
| 1.3.6.1.4.1.2272.1.1.32 | rcSysDefaultRuntimeConfigFileName | 1 | 1 | default config. |
| 1.3.6.1.4.1.2272.1.1.33 | rcSysDefaultBootConfigFileName | 1 | 1 | default boot config. |
| 1.3.6.1.4.1.2272.1.1.34 | rcSysConfigFileName | 1 | 1 | File name used in conjunction with rcSysAction. If rcSysAction is set to 'saveRuntimeConfig' or 'saveRuntimeConfigToSlave' then t… |
| 1.3.6.1.4.1.2272.1.1.35 | rcSysLastRunTimeConfigSave | 1 | 1 | SysUpTime of the last time when the run time configuration was written to. |
| 1.3.6.1.4.1.2272.1.1.36 | rcSysLastRunTimeConfigSaveToSlave | 1 | 1 | SysUpTime of the last time when the run time configuration was written to slave NVRAM. |
| 1.3.6.1.4.1.2272.1.1.37 | rcSysLastBootConfigSave | 1 | 1 | SysUpTime of the last time when the boot configuration was written to. |
| 1.3.6.1.4.1.2272.1.1.38 | rcSysLastBootConfigSaveOnSlave | 1 | 1 | SysUpTime of the last time when the boot configuration was written on the slave NVRAM. |
| 1.3.6.1.4.1.2272.1.1.39 | rcSysRmonUtilizationMethod | 1 | 1 | Used to control whether RMON should use a half-duplex or full-duplex formula to calculate port utilization. When set to 'halfDupl… |
| 1.3.6.1.4.1.2272.1.1.40 | rcSysCommReadWriteLayer1 | 1 | 1 | read-write L1 access |
| 1.3.6.1.4.1.2272.1.1.41 | rcSysOtherBufferUtil | 1 | 1 | bw currently consumed |
| 1.3.6.1.4.1.2272.1.1.42 | rcSysOtherBufferUtilPeak | 1 | 1 | peak bw since reset |
| 1.3.6.1.4.1.2272.1.1.43 | rcSysOtherBufferUtilPeakTime | 1 | 1 | timestamp for rcSysPeakBw |
| 1.3.6.1.4.1.2272.1.1.44 | rcSysOtherCpuUtil | 1 | 1 | % cpu utilization |
| 1.3.6.1.4.1.2272.1.1.45 | rcSysOtherSwitchFabricUtil | 1 | 1 | % switch fabric util |
| 1.3.6.1.4.1.2272.1.1.46 | rcSysDramSize | 1 | 1 | Dram size in mega-bytes |
| 1.3.6.1.4.1.2272.1.1.47 | rcSysDramUsed | 1 | 1 | Dram used in percentage |
| 1.3.6.1.4.1.2272.1.1.48 | rcSysDramFree | 1 | 1 | Dram free size in kilo-bytes |
| 1.3.6.1.4.1.2272.1.1.49 | rcSysDramMaxBlockFree | 1 | 1 | Dram max block free size in kilo-bytes |
| 1.3.6.1.4.1.2272.1.1.51 | rcSysVirtualIpAddr | 1 | 1 | Virtual IP is an IP address that owned and advertised only by the master CPU. So whichever CPU is master registers this IP addres… |
| 1.3.6.1.4.1.2272.1.1.52 | rcSysVirtualNetMask | 1 | 1 | Net mask of the management virtual Ip address |
| 1.3.6.1.4.1.2272.1.1.53 | rcSysReadWriteLevel | 1 | 1 | The status of the read/write level |
| 1.3.6.1.4.1.2272.1.1.55 | rcSysMTUSize | 1 | 1 | This is the maximum transmission size of frames that all the ports on the chassis support. |
| 1.3.6.1.4.1.2272.1.1.56 | rcSysClockSyncTime | 1 | 1 | Time interval at which RTC and system clocks are synchronized. |
| 1.3.6.1.4.1.2272.1.1.57 | rcSysForceTrapSender | 1 | 1 | This is a flag that if user wants to configured CLIP (Circuit Less IP) as trap originator. |
| 1.3.6.1.4.1.2272.1.1.58 | rcSysMrouteStrLimit | 1 | 1 | enable or disable mroute stream limit in system. |
| 1.3.6.1.4.1.2272.1.1.60 | rcSysTrapRecvTable | 1 | 6 | The trap receiver table (0 to 25 entries). This table lists the addresses of Network Management Stations that should receive tra… |
| 1.3.6.1.4.1.2272.1.1.61 | rcSysAccessPolicyTable | 1 | 20 | Management access policy table. This table is used to permit or deny access to this device via the specified source Id. |
| 1.3.6.1.4.1.2272.1.1.62 | rcSysTrapSenderTable | 1 | 3 | The trap sender table (0 to 25 entries). This table lists the addresses of Network Management Stations and the Source Address th… |
| 1.3.6.1.4.1.2272.1.1.63 | rcSysDnsServerListTableSize | 1 | 1 | Used to indicate the number of entries in the table. |
| 1.3.6.1.4.1.2272.1.1.64 | rcSysDnsServerListTable | 1 | 9 | DNS serever list table used to store the details of the DNS server configured. |
| 1.3.6.1.4.1.2272.1.1.66 | rcSysMsgLogFrequency | 1 | 1 | Used to specify the maximum frequency/count of the occurence of the Log Message. |
| 1.3.6.1.4.1.2272.1.1.67 | rcSysMsgLogText | 1 | 1 | A textual string containing the first four characters of the Log Message. |
| 1.3.6.1.4.1.2272.1.1.68 | rcSysForceIpHdrSender | 1 | 1 | Flag to decide if IP header source address will be matched with SNMP header sender networks. |
| 1.3.6.1.4.1.2272.1.1.69 | rcSysVlanMaxId | 1 | 1 | The maximum vlan Id that supported |
| 1.3.6.1.4.1.2272.1.1.70 | rcSysDnsDomainName | 1 | 1 | Default domain used for querying the DNS Server. |
| 1.3.6.1.4.1.2272.1.1.71 | rcSysDnsServerListIpAddr | 1 | 1 | DNS server's IP address |
| 1.3.6.1.4.1.2272.1.1.72 | rcSysDnsRequestType | 1 | 1 | DNS Type: Whether it was Dns Request or a Response |
| 1.3.6.1.4.1.2272.1.1.73 | rcSysSpanningTreeOperMode | 1 | 1 | This object indicates the current spanning-tree mode of the system. The meaning of specific values is: nortelStpg(1) .. The older … |
| 1.3.6.1.4.1.2272.1.1.74 | rcSysSpanningTreeAdminMode | 1 | 1 | This object indicates the desired spanning-tree mode of the system. The meaning of specific values is: nortelStpg(1) .. The older … |
| 1.3.6.1.4.1.2272.1.1.75 | rcSysAutoRecoverDelay | 1 | 1 | Time interval in seconds after which auto-recovery runs on ports to clear action taken by cp-limit, link flap or loop detect |
| 1.3.6.1.4.1.2272.1.1.76 | rcSysMacFlapLimitTime | 1 | 1 | Time limit in milliseconds for MAC flapping for loop-detect feature |
| 1.3.6.1.4.1.2272.1.1.77 | rcSysMacFlapLimitCount | 1 | 1 | Number of times mac flapping can happen for loop-detect feature |
| 1.3.6.1.4.1.2272.1.1.78 | rcSysExtCplimitEnable | 1 | 1 | enable or disable extended CP-LIMIT in system. |
| 1.3.6.1.4.1.2272.1.1.79 | rcSysExtCplimitMinCongTime | 1 | 1 | Minimum time for which System octapid should be congested to trigger congestion algorithm for extended CP-LIMIT in mSecs |
| 1.3.6.1.4.1.2272.1.1.80 | rcSysExtCplimitMaxPorts | 1 | 1 | Maximum number of ports which need to be monitored for congestion in Extended CP-LIMIT |
| 1.3.6.1.4.1.2272.1.1.81 | rcSysExtCplimitPortCongTime | 1 | 1 | Minimum time for which ingress traffic utilization rate of a monitored port should stay more than the allowed limits in order to … |
| 1.3.6.1.4.1.2272.1.1.82 | rcSysExtCplimitTrapLevel | 1 | 1 | Indicates the trap level for extended CP-LIMIT |
| 1.3.6.1.4.1.2272.1.1.83 | rcSysExtCplimitSysOctapidCongested | 1 | 1 | Indicates whether system octapid congestion detected for extended cp-limit |
| 1.3.6.1.4.1.2272.1.1.84 | rcSysExtCplimitPortsMonitored | 1 | 1 | Indicates whether ports has been shutdown due to extended cp-limit |
| 1.3.6.1.4.1.2272.1.1.85 | rcSysExtCplimitPortsShutDown | 1 | 1 | Indicates whether ports has been shutdown due to extended Cp-limit |
| 1.3.6.1.4.1.2272.1.1.86 | rcSysActionL1 | 1 | 1 | Initiate a system action for layer1 user |
| 1.3.6.1.4.1.2272.1.1.87 | rcSysActionL2 | 1 | 1 | Initiate a system action for layer2 user |
| 1.3.6.1.4.1.2272.1.1.88 | rcSysActionL3 | 1 | 1 | Initiate a system action for layer2 user |
| 1.3.6.1.4.1.2272.1.1.89 | rcSysActionRwa | 1 | 1 | Initiate a system action. |
| 1.3.6.1.4.1.2272.1.1.90 | rcSysPowerUsage | 1 | 1 | The current power usage for the whole chassis. |
| 1.3.6.1.4.1.2272.1.1.91 | rcSysPowerAvailable | 1 | 1 | The current power available for the whole chassis. |
| 1.3.6.1.4.1.2272.1.1.92 | rcSysBpduStartMacAddress | 1 | 1 | Starting Multicast MAC address for BPDUs |
| 1.3.6.1.4.1.2272.1.1.93 | rcSysBpduMacAddressMask | 1 | 1 | BPDU MAC address Mask |
| 1.3.6.1.4.1.2272.1.1.94 | rcSysFrcMsgControlTable | 1 | 4 | Management Force-msg Control table. This table is used to specify the pattern for Force-msg Control |
| 1.3.6.1.4.1.2272.1.1.95 | rcSysAccPolSnmpGrpTable | 1 | 4 | SNMP group list for access policy |
| 1.3.6.1.4.1.2272.1.1.96 | rcSysVirtualIpv6Addr | 1 | 1 | The virtual ipv6 address that is owned, advertised, and registered by the master CPU only. Unlike the net management IP addres… |
| 1.3.6.1.4.1.2272.1.1.97 | rcSysVirtualIpv6PrefixLength | 1 | 1 | The length of the virtual ipv6 addr prefix (in bits). |
| 1.3.6.1.4.1.2272.1.1.98 | rcSysConfigMode | 1 | 1 | This is used in conjunction with rcSysAction inorder to decide the mode in which the config file is going to be saved in. |
| 1.3.6.1.4.1.2272.1.1.99 | rcSysExtendedPingBypass | 4 | 8 | None |
| 1.3.6.1.4.1.2272.1.1.100 | rcSysLicenseTrialDaysLeft | 1 | 1 | This indicates days left before License Trial Period will expire. |
| 1.3.6.1.4.1.2272.1.1.101 | rcSysSingleMgmtIpAddr | 1 | 1 | Single Managament IP Address |
| 1.3.6.1.4.1.2272.1.1.102 | rcSysCopHighCpuUtilThreshold | 1 | 1 | CopHighCpuUtilThreshold % |
| 1.3.6.1.4.1.2272.1.1.103 | rcSysCopHighCpuUtilLogTime | 1 | 1 | rcSysCopHighCpuUtilLogTime in secs |
| 1.3.6.1.4.1.2272.1.1.104 | rcSysConfigChangeFlag | 1 | 1 | Indicates whether the config file has been changed after loading of config |
| 1.3.6.1.4.1.2272.1.1.105 | rcSysBootUpgradeMode | 1 | 1 | To set the mode of bootupgrade |
| 1.3.6.1.4.1.2272.1.1.106 | rcSysBootUpgradeTime | 1 | 1 | To set time for bootupgrade |
| 1.3.6.1.4.1.2272.1.1.107 | rcSysBootUpgradeCsuMode | 1 | 1 | To set the mode of Csu for bootupgrade |
| 1.3.6.1.4.1.2272.1.1.108 | rcSysUpgradeStatus | 1 | 1 | To get the Upgrade status |
| 1.3.6.1.4.1.2272.1.1.109 | rcSysUpgradeCompleteStatus | 1 | 1 | To get the Upgrade status |
| 1.3.6.1.4.1.2272.1.1.110 | rcSysBootUpgradeConsistencyCheck | 1 | 1 | To enable or disable the consistency check in BootUpgrade |
| 1.3.6.1.4.1.2272.1.1.111 | rcSysAutoSaveConfigState | 1 | 1 | To enable or disable the autosaveconfig feature |
| 1.3.6.1.4.1.2272.1.1.112 | rcSysAutoSaveConfigFileName | 1 | 1 | The auto config file name in which the configurations have to be saved automatically. |
| 1.3.6.1.4.1.2272.1.1.113 | rcSysAutoSaveConfigInterval | 1 | 1 | To set the Interval for autosave config |
| 1.3.6.1.4.1.2272.1.1.114 | rcSysAutoSaveConfigChangeFlag | 1 | 1 | Indicates whether there are any configuration changes after last auto save config. |
| 1.3.6.1.4.1.2272.1.1.115 | rcSysAutoSaveConfigCounter | 1 | 1 | Auto save config counter that should be prefixed to the filename. |
| ... | ||||