Reference record for OID 1.3.6.1.4.1.2272.1.1.39


parent
1.3.6.1.4.1.2272.1.1 (rcSystem)
node code
39
node name
rcSysRmonUtilizationMethod
dot oid
1.3.6.1.4.1.2272.1.1.39
type
OBJECT-TYPE
asn1 oid
  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprise(1) rapidCity(2272) rcMgmt(1) rcSystem(1) rcSysRmonUtilizationMethod(39)}
  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprise(1) rapidCity(2272) rapidcityfoo(1) rcSystem(1) rcSysRmonUtilizationMethod(39)}
  • ...skipped...
  • {iso(1) org(3) dod(6) internet(1) private(4) enterprise(1) rapidCity(2272) rcMgmt(1) rcSystem(1) rcSysRmonUtilizationMethod(39)}
  • {iso(1) org(3) dod(6) internet(1) private(4) enterprise(1) rapidCity(2272) rapidcityfoo(1) rcSystem(1) rcSysRmonUtilizationMethod(39)}
  • {iso(1) org(3) dod(6) internet(1) private(4) enterprises(1) rapidCity(2272) rcMgmt(1) rcSystem(1) rcSysRmonUtilizationMethod(39)}
  • {iso(1) org(3) dod(6) internet(1) private(4) enterprises(1) rapidCity(2272) rapidcityfoo(1) rcSystem(1) rcSysRmonUtilizationMethod(39)}
  • ...skipped...
  • {iso(1) iso-identified-organization(3) dod(6) internet(1) private(4) enterprises(1) rapidCity(2272) rcMgmt(1) rcSystem(1) rcSysRmonUtilizationMethod(39)}
  • {iso(1) iso-identified-organization(3) dod(6) internet(1) private(4) enterprises(1) rapidCity(2272) rapidcityfoo(1) rcSystem(1) rcSysRmonUtilizationMethod(39)}
  • iri oid
  • /iso/identified-organization/dod/internet/private/enterprise/rapidCity/rcMgmt/rcSystem/rcSysRmonUtilizationMethod
  • /iso/identified-organization/dod/internet/private/enterprise/rapidCity/rapidcityfoo/rcSystem/rcSysRmonUtilizationMethod
  • ...skipped...
  • /iso/org/dod/internet/private/enterprise/rapidCity/rcMgmt/rcSystem/rcSysRmonUtilizationMethod
  • /iso/org/dod/internet/private/enterprise/rapidCity/rapidcityfoo/rcSystem/rcSysRmonUtilizationMethod
  • /iso/org/dod/internet/private/enterprises/rapidCity/rcMgmt/rcSystem/rcSysRmonUtilizationMethod
  • /iso/org/dod/internet/private/enterprises/rapidCity/rapidcityfoo/rcSystem/rcSysRmonUtilizationMethod
  • ...skipped...
  • /iso/iso-identified-organization/dod/internet/private/enterprises/rapidCity/rcMgmt/rcSystem/rcSysRmonUtilizationMethod
  • /iso/iso-identified-organization/dod/internet/private/enterprises/rapidCity/rapidcityfoo/rcSystem/rcSysRmonUtilizationMethod
  • iri by oid_info
    /ISO/Identified-Organization/6/1/4/1/2272/1/1/39

    Description by mibdepot

    Used to control whether RMON should use a half-duplex
    or full-duplex formula to calculate port utilization.
    When set to 'halfDuplex', RMON will use InOctets and
    the port's speed to calculate port utilization (this
    is the standard RMON rfc1271 convention).
    When set to 'fullDuplex', RMON will use InOctets and
    OutOctets and 2X the port's speed to calculate port
    utilization. Furthermore, if this variable is set to
    'fullDuplex', but the port is operating in a
    half-duplex mode, the calculation defaults back to
    the rfc1271 convention.

    Parsed from file xlr30.mib.txt
    Company: None
    Module: RAPID-CITY-MIB

    Description by circitor

    Used to control whether RMON should use a half-duplex
    or full-duplex formula to calculate port utilization.
    When set to 'halfDuplex', RMON will use InOctets and
    the port's speed to calculate port utilization (this
    is the standard RMON rfc1271 convention).
    When set to 'fullDuplex', RMON will use InOctets and
    OutOctets and 2X the port's speed to calculate port
    utilization. Furthermore, if this variable is set to
    'fullDuplex', but the port is operating in a
    half-duplex mode, the calculation defaults back to
    the rfc1271 convention.

    Parsed from file RAPID-CITY.mib
    Module: RAPID-CITY

    Information by mibdepot

    rcSysRmonUtilizationMethod OBJECT-TYPE SYNTAX INTEGER { halfDuplex(1), fullDuplex(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Used to control whether RMON should use a half-duplex or full-duplex formula to calculate port utilization. When set to 'halfDuplex', RMON will use InOctets and the port's speed to calculate port utilization (this is the standard RMON rfc1271 convention). When set to 'fullDuplex', RMON will use InOctets and OutOctets and 2X the port's speed to calculate port utilization. Furthermore, if this variable is set to 'fullDuplex', but the port is operating in a half-duplex mode, the calculation defaults back to the rfc1271 convention." DEFVAL { halfDuplex } ::= { rcSystem 39 }

    Information by oid_info

    Vendor: Rapid City Communication
    Module: RAPID-CITY

    [Automatically extracted from oidview.com]

    Information by circitor

    rcSysRmonUtilizationMethod OBJECT-TYPE SYNTAX INTEGER { halfDuplex(1), fullDuplex(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Used to control whether RMON should use a half-duplex or full-duplex formula to calculate port utilization. When set to 'halfDuplex', RMON will use InOctets and the port's speed to calculate port utilization (this is the standard RMON rfc1271 convention). When set to 'fullDuplex', RMON will use InOctets and OutOctets and 2X the port's speed to calculate port utilization. Furthermore, if this variable is set to 'fullDuplex', but the port is operating in a half-duplex mode, the calculation defaults back to the rfc1271 convention." DEFVAL { halfDuplex } ::= { rcSystem 39 }

    First Registration Authority (recovered by parent 1.3.6.1.4.1.2272)

    Sharon Chisholm

    Children (1)

    OIDNameSub childrenSub Nodes TotalDescription
    1.3.6.1.4.1.2272.1.1.39.0 rcSysRmonUtilizationMethod 0 0 None

    Brothers (111)

    To many brothers! Only 100 nearest brothers are shown.

    OIDNameSub childrenSub Nodes TotalDescription
    ...
    1.3.6.1.4.1.2272.1.1.1 rcSysIpAddr 1 1 This entity's IP address.
    1.3.6.1.4.1.2272.1.1.2 rcSysNetMask 1 1 This entity's subnet mask.
    1.3.6.1.4.1.2272.1.1.3 rcSysBroadcast 1 1 This entity's broadcast address.
    1.3.6.1.4.1.2272.1.1.4 rcSysCommReadWriteAll 1 1 When an SNMP message is received by this entity, the
    community string in the message is compared with this
    string first. If it m…
    1.3.6.1.4.1.2272.1.1.5 rcSysCommReadWrite 1 1 When an SNMP message is received by this entity, the
    community string in the message is compared with this
    string second. If it …
    1.3.6.1.4.1.2272.1.1.6 rcSysCommReadOnly 1 1 When an SNMP message is received by this entity, the
    community string in the message is compared with this
    string third. If it m…
    1.3.6.1.4.1.2272.1.1.7 rcSysVersion 1 1 Software version running on device
    1.3.6.1.4.1.2272.1.1.8 rcSysAction 1 1 Initiate a system action.
    1.3.6.1.4.1.2272.1.1.9 rcSysResult 1 1 Result from the last system action.
    1.3.6.1.4.1.2272.1.1.10 rcSysLastChange 1 1 Last management initiated configuration
    change since sysUpTime.
    1.3.6.1.4.1.2272.1.1.11 rcSysLastVlanChange 1 1 Last management initiated VLAN configuration
    change since sysUpTime.
    1.3.6.1.4.1.2272.1.1.12 rcSysLastStatisticsReset 1 1 Last management initiated statistics reset
    since sysUpTime.
    1.3.6.1.4.1.2272.1.1.13 rcSysBufferUtil 1 1 Buffer utilization as a percentage of the
    total amount of buffer space in the system.
    A high value indicates congestion.
    1.3.6.1.4.1.2272.1.1.14 rcSysBufferUtilPeak 1 1 The largest buffer utilization since sysUpTime
    1.3.6.1.4.1.2272.1.1.15 rcSysBufferUtilPeakTime 1 1 Timestamp for rcSysPeakBandwidth
    1.3.6.1.4.1.2272.1.1.16 rcSysNVRamSize 1 1 Total Non-volatile RAM in Kbytes
    1.3.6.1.4.1.2272.1.1.17 rcSysNVRamUsed 1 1 Non-volatile RAM in use in Kbytes
    1.3.6.1.4.1.2272.1.1.18 rcSysLastSaveToNVRam 1 1 SysUpTime of the last time when NVRAM was
    written to. This could be a save of the system
    configuration or via a file transfer of…
    1.3.6.1.4.1.2272.1.1.19 rcSysLastSaveToStandbyNVRam 1 1 SysUpTime of the last time when the standby NVRAM
    (on the back-up CPU board) was written to.
    1.3.6.1.4.1.2272.1.1.20 rcSysCpuUtil 1 1 Percentage of CPU utilization
    1.3.6.1.4.1.2272.1.1.21 rcSysSwitchFabricUtil 1 1 Percentage of Switching Fabric utilization
    1.3.6.1.4.1.2272.1.1.22 rcSysRmonMemSize 1 1 Amount of RAM in bytes to allocate for RMON
    to use when rcSysRmonEnable is TRUE.
    1.3.6.1.4.1.2272.1.1.23 rcSysRmonEnable 1 1 Control whether the RMON feature should be
    enabled.

    To enable the RMON feature, set this variable to
    true. The RMON agent in the …
    1.3.6.1.4.1.2272.1.1.24 rcSysRmonSaveConfig 1 1 Control whether RMON configuration information
    should be saved to NVRAM so RMON settings can
    be automatically reinstalled after a…
    1.3.6.1.4.1.2272.1.1.25 rcSysRmonTrapOption 1 1 Used to indicate whether RMON traps should be
    sent to only the owner of the RMON alarm (i.e.,
    the manager that created the alarm …
    1.3.6.1.4.1.2272.1.1.26 rcSysSupportRouting 1 1 Used to indicate whether routing is supported
    in this product.
    1.3.6.1.4.1.2272.1.1.27 rcSysSupportWebServer 1 1 Used to indicate whether WebServer is supported
    in this product.
    1.3.6.1.4.1.2272.1.1.28 rcSysLastIpAddrChange 1 1 Last management initiated IP address change
    since sysUpTime. Any addition or deletion of
    an IP address to a single routable port…
    1.3.6.1.4.1.2272.1.1.29 rcSysCommReadWriteLayer3 1 1 When an SNMP message is received by this entity, the
    community string in the message is compared with this
    string third. If it m…
    1.3.6.1.4.1.2272.1.1.30 rcSysCommReadWriteLayer2 1 1 When an SNMP message is received by this entity, the
    community string in the message is compared with this
    string fourth. If it …
    1.3.6.1.4.1.2272.1.1.31 rcSysAccessPolicyEnable 1 1 Used to configure the system access policy feature.
    if 'true', the rcSysAccessPolicyTable is examined to
    determine which packets …
    1.3.6.1.4.1.2272.1.1.32 rcSysDefaultRuntimeConfigFileName 1 1 default config.
    1.3.6.1.4.1.2272.1.1.33 rcSysDefaultBootConfigFileName 1 1 default boot config.
    1.3.6.1.4.1.2272.1.1.34 rcSysConfigFileName 1 1 File name used in conjunction with rcSysAction.

    If rcSysAction is set to 'saveRuntimeConfig' or
    'saveRuntimeConfigToSlave' then t…
    1.3.6.1.4.1.2272.1.1.35 rcSysLastRunTimeConfigSave 1 1 SysUpTime of the last time when the run time
    configuration was written to.
    1.3.6.1.4.1.2272.1.1.36 rcSysLastRunTimeConfigSaveToSlave 1 1 SysUpTime of the last time when the run time
    configuration was written to slave NVRAM.
    1.3.6.1.4.1.2272.1.1.37 rcSysLastBootConfigSave 1 1 SysUpTime of the last time when the boot
    configuration was written to.
    1.3.6.1.4.1.2272.1.1.38 rcSysLastBootConfigSaveOnSlave 1 1 SysUpTime of the last time when the boot
    configuration was written on the slave NVRAM.
    1.3.6.1.4.1.2272.1.1.40 rcSysCommReadWriteLayer1 1 1 read-write L1 access
    1.3.6.1.4.1.2272.1.1.41 rcSysOtherBufferUtil 1 1 bw currently consumed
    1.3.6.1.4.1.2272.1.1.42 rcSysOtherBufferUtilPeak 1 1 peak bw since reset
    1.3.6.1.4.1.2272.1.1.43 rcSysOtherBufferUtilPeakTime 1 1 timestamp for rcSysPeakBw
    1.3.6.1.4.1.2272.1.1.44 rcSysOtherCpuUtil 1 1 % cpu utilization
    1.3.6.1.4.1.2272.1.1.45 rcSysOtherSwitchFabricUtil 1 1 % switch fabric util
    1.3.6.1.4.1.2272.1.1.46 rcSysDramSize 1 1 Dram size in mega-bytes
    1.3.6.1.4.1.2272.1.1.47 rcSysDramUsed 1 1 Dram used in percentage
    1.3.6.1.4.1.2272.1.1.48 rcSysDramFree 1 1 Dram free size in kilo-bytes
    1.3.6.1.4.1.2272.1.1.49 rcSysDramMaxBlockFree 1 1 Dram max block free size in kilo-bytes
    1.3.6.1.4.1.2272.1.1.51 rcSysVirtualIpAddr 1 1 Virtual IP is an IP address that owned and
    advertised only by the master CPU. So whichever
    CPU is master registers this IP addres…
    1.3.6.1.4.1.2272.1.1.52 rcSysVirtualNetMask 1 1 Net mask of the management virtual Ip address
    1.3.6.1.4.1.2272.1.1.53 rcSysReadWriteLevel 1 1 The status of the read/write level
    1.3.6.1.4.1.2272.1.1.55 rcSysMTUSize 1 1 This is the maximum transmission size of frames that all
    the ports on the chassis support.
    1.3.6.1.4.1.2272.1.1.56 rcSysClockSyncTime 1 1 Time interval at which RTC and system clocks are
    synchronized.
    1.3.6.1.4.1.2272.1.1.57 rcSysForceTrapSender 1 1 This is a flag that if user wants to configured
    CLIP (Circuit Less IP) as trap originator.
    1.3.6.1.4.1.2272.1.1.58 rcSysMrouteStrLimit 1 1 enable or disable mroute stream limit in system.
    1.3.6.1.4.1.2272.1.1.60 rcSysTrapRecvTable 1 6 The trap receiver table (0 to 25 entries). This
    table lists the addresses of Network Management
    Stations that should receive tra…
    1.3.6.1.4.1.2272.1.1.61 rcSysAccessPolicyTable 1 20 Management access policy table. This table is
    used to permit or deny access to this device via
    the specified source Id.
    1.3.6.1.4.1.2272.1.1.62 rcSysTrapSenderTable 1 3 The trap sender table (0 to 25 entries). This
    table lists the addresses of Network Management
    Stations and the Source Address th…
    1.3.6.1.4.1.2272.1.1.63 rcSysDnsServerListTableSize 1 1 Used to indicate the number of entries in the
    table.
    1.3.6.1.4.1.2272.1.1.64 rcSysDnsServerListTable 1 9 DNS serever list table used to store the
    details of the DNS server configured.
    1.3.6.1.4.1.2272.1.1.65 rcSysDnsHostTable 1 7 DNS Host table.
    1.3.6.1.4.1.2272.1.1.66 rcSysMsgLogFrequency 1 1 Used to specify the maximum frequency/count
    of the occurence of the Log Message.
    1.3.6.1.4.1.2272.1.1.67 rcSysMsgLogText 1 1 A textual string containing the first four
    characters of the Log Message.
    1.3.6.1.4.1.2272.1.1.68 rcSysForceIpHdrSender 1 1 Flag to decide if IP header source address will
    be matched with SNMP header sender networks.
    1.3.6.1.4.1.2272.1.1.69 rcSysVlanMaxId 1 1 The maximum vlan Id that supported
    1.3.6.1.4.1.2272.1.1.70 rcSysDnsDomainName 1 1 Default domain used for querying the DNS Server.
    1.3.6.1.4.1.2272.1.1.71 rcSysDnsServerListIpAddr 1 1 DNS server's IP address
    1.3.6.1.4.1.2272.1.1.72 rcSysDnsRequestType 1 1 DNS Type: Whether it was Dns Request or a Response
    1.3.6.1.4.1.2272.1.1.73 rcSysSpanningTreeOperMode 1 1 This object indicates the current spanning-tree mode
    of the system.
    The meaning of specific values is:
    nortelStpg(1) .. The older …
    1.3.6.1.4.1.2272.1.1.74 rcSysSpanningTreeAdminMode 1 1 This object indicates the desired spanning-tree mode
    of the system.
    The meaning of specific values is:
    nortelStpg(1) .. The older …
    1.3.6.1.4.1.2272.1.1.75 rcSysAutoRecoverDelay 1 1 Time interval in seconds after which auto-recovery
    runs on ports to clear action taken by cp-limit,
    link flap or loop detect
    1.3.6.1.4.1.2272.1.1.76 rcSysMacFlapLimitTime 1 1 Time limit in milliseconds for MAC flapping for
    loop-detect feature
    1.3.6.1.4.1.2272.1.1.77 rcSysMacFlapLimitCount 1 1 Number of times mac flapping can happen for loop-detect
    feature
    1.3.6.1.4.1.2272.1.1.78 rcSysExtCplimitEnable 1 1 enable or disable extended CP-LIMIT in system.
    1.3.6.1.4.1.2272.1.1.79 rcSysExtCplimitMinCongTime 1 1 Minimum time for which System octapid should be
    congested to trigger congestion algorithm for extended
    CP-LIMIT in mSecs
    1.3.6.1.4.1.2272.1.1.80 rcSysExtCplimitMaxPorts 1 1 Maximum number of ports which need to be monitored
    for congestion in Extended CP-LIMIT
    1.3.6.1.4.1.2272.1.1.81 rcSysExtCplimitPortCongTime 1 1 Minimum time for which ingress traffic utilization rate
    of a monitored port should stay more than the allowed limits
    in order to …
    1.3.6.1.4.1.2272.1.1.82 rcSysExtCplimitTrapLevel 1 1 Indicates the trap level for extended CP-LIMIT
    1.3.6.1.4.1.2272.1.1.83 rcSysExtCplimitSysOctapidCongested 1 1 Indicates whether system octapid congestion detected for
    extended cp-limit
    1.3.6.1.4.1.2272.1.1.84 rcSysExtCplimitPortsMonitored 1 1 Indicates whether ports has been shutdown due to extended
    cp-limit
    1.3.6.1.4.1.2272.1.1.85 rcSysExtCplimitPortsShutDown 1 1 Indicates whether ports has been shutdown due to
    extended Cp-limit
    1.3.6.1.4.1.2272.1.1.86 rcSysActionL1 1 1 Initiate a system action for layer1 user
    1.3.6.1.4.1.2272.1.1.87 rcSysActionL2 1 1 Initiate a system action for layer2 user
    1.3.6.1.4.1.2272.1.1.88 rcSysActionL3 1 1 Initiate a system action for layer2 user
    1.3.6.1.4.1.2272.1.1.89 rcSysActionRwa 1 1 Initiate a system action.
    ...