Status of the cable as a whole. The status of a
cable is in a sense, a summation of the status of its
pairs. If all the pairs are normal, then the cable is
normal. If the cable consists of zero or more normal
pairs and one or more open pairs, then the cable is
considered open. If it consists of shorted pairs and
normal pairs, then the cable is considered shorted.
Any combination of open and shorted pairs is
considered simply FAILED.
Parsed from file RC-DIAG-MIB.mib.txt
Company: avaya
Module: RC-DIAG-MIB
rcDiagVctCableStatus OBJECT-TYPE SYNTAX INTEGER { cableFail(1), cableNormal(2), cableOpen(3), cableShorted(4), cableNotApplicable(5), cableUntested(6) } MAX-ACCESS read-only STATUS current DESCRIPTION "Status of the cable as a whole. The status of a cable is in a sense, a summation of the status of its pairs. If all the pairs are normal, then the cable is normal. If the cable consists of zero or more normal pairs and one or more open pairs, then the cable is considered open. If it consists of shorted pairs and normal pairs, then the cable is considered shorted. Any combination of open and shorted pairs is considered simply FAILED." ::= { rcDiagVctEntry 4 }
Vendor: Rapid City Communication
Module: RAPID-CITY
[Automatically extracted from oidview.com]
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.2272.1.23.4.1.1 | rcDiagVctIfIndex | 0 | 0 | Port IfIndex. |
| 1.3.6.1.4.1.2272.1.23.4.1.2 | rcDiagVctNormalCableLength | 0 | 0 | Cable length, this indicates a range in which the actual length falls. |
| 1.3.6.1.4.1.2272.1.23.4.1.3 | rcDiagVctPhyType | 0 | 0 | Phy type, 100MHz throught 1 GHz, or broadcom phy. |
| 1.3.6.1.4.1.2272.1.23.4.1.5 | rcDiagVctPair1Status | 0 | 0 | The status of a single pair in the cable |
| 1.3.6.1.4.1.2272.1.23.4.1.6 | rcDiagVctPair1ErrLength | 0 | 0 | Error Pair Length, in meters, measured by Time Domain Reflectometry. |
| 1.3.6.1.4.1.2272.1.23.4.1.7 | rcDiagVctPair2Status | 0 | 0 | The status of a single pair in the cable |
| 1.3.6.1.4.1.2272.1.23.4.1.8 | rcDiagVctPair2ErrLength | 0 | 0 | Error Pair Length, in meters, measured by Time Domain Reflectometry. |
| 1.3.6.1.4.1.2272.1.23.4.1.9 | rcDiagVctPair3Status | 0 | 0 | The status of a single pair in the cable |
| 1.3.6.1.4.1.2272.1.23.4.1.10 | rcDiagVctPair3ErrLength | 0 | 0 | Error Pair Length, in meters, measured by Time Domain Reflectometry. |
| 1.3.6.1.4.1.2272.1.23.4.1.11 | rcDiagVctPair4Status | 0 | 0 | The status of a single pair in the cable |
| 1.3.6.1.4.1.2272.1.23.4.1.12 | rcDiagVctPair4ErrLength | 0 | 0 | Error Pair Length, in meters, measured by Time Domain Reflectometry. |
| 1.3.6.1.4.1.2272.1.23.4.1.13 | rcDiagVctStartTest | 0 | 0 | Start VCT test, Set this object to TRUE to perform a VCT test on the current port. A get on this object produces an undefines val… |
| 1.3.6.1.4.1.2272.1.23.4.1.14 | rcDiagVctTestDone | 0 | 0 | When a VCT test is started setting rcDiagVctStartTest, this object is immediately set to FALSE by the switch software. It remain … |
| 1.3.6.1.4.1.2272.1.23.4.1.15 | rcDiagVctCableCategory | 0 | 0 | Cable type: CAT3 or CAT5. |
| 1.3.6.1.4.1.2272.1.23.4.1.16 | rcDiagVctCableLength | 0 | 0 | Length of cable in meters based on average electrical length of 4 pairs. Measurement can be done when traffic is live or not. |
| 1.3.6.1.4.1.2272.1.23.4.1.17 | rcDiagVctPair1Polarity | 0 | 0 | The polarity of a single pair in the cable. |
| 1.3.6.1.4.1.2272.1.23.4.1.18 | rcDiagVctPair1Swap | 0 | 0 | The pair swap in the cable. |
| 1.3.6.1.4.1.2272.1.23.4.1.19 | rcDiagVctPair1Skew | 0 | 0 | Differential cable pair length in meters. Skew measurement can only be performed when cable gigabit link is up regardless of traf… |
| 1.3.6.1.4.1.2272.1.23.4.1.20 | rcDiagVctPair2Polarity | 0 | 0 | The polarity of a single pair in the cable. |
| 1.3.6.1.4.1.2272.1.23.4.1.21 | rcDiagVctPair2Swap | 0 | 0 | The pair swap in the cable. |
| 1.3.6.1.4.1.2272.1.23.4.1.22 | rcDiagVctPair2Skew | 0 | 0 | Differential cable pair length in meters. Skew measurement can only be performed when cable gigabit link is up regardless of traf… |
| 1.3.6.1.4.1.2272.1.23.4.1.23 | rcDiagVctPair3Polarity | 0 | 0 | The polarity of a single pair in the cable. |
| 1.3.6.1.4.1.2272.1.23.4.1.24 | rcDiagVctPair3Swap | 0 | 0 | The pair swap in the cable. |
| 1.3.6.1.4.1.2272.1.23.4.1.25 | rcDiagVctPair3Skew | 0 | 0 | Differential cable pair length in meters. Skew measurement can only be performed when cable gigabit link is up regardless of traf… |
| 1.3.6.1.4.1.2272.1.23.4.1.26 | rcDiagVctPair4Polarity | 0 | 0 | The polarity of a single pair in the cable. |
| 1.3.6.1.4.1.2272.1.23.4.1.27 | rcDiagVctPair4Swap | 0 | 0 | The pair swap in the cable. |
| 1.3.6.1.4.1.2272.1.23.4.1.28 | rcDiagVctPair4Skew | 0 | 0 | Differential cable pair length in meters. Skew measurement can only be performed when cable gigabit link is up regardless of traf… |