Provisioning information for a particular TD
Connectivity test and the test results.
Parsed from file RC-TLS-MIB.mib.txt
Company: avaya
Module: RC-TLS-MIB
rcTlsTestTdcEntry OBJECT-TYPE SYNTAX RcTlsTestTdcEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Provisioning information for a particular TD Connectivity test and the test results." INDEX { rcTlsTestTdcTestId } ::= { rcTlsTestTdcTable 1 }
Vendor: Avaya
Module: RC-TLS-MIB (RC-TLS-MIB.mib)
Type: ENTRY
Access: not-accessible
Syntax: RcTlsTestTdcEntry
Automatically extracted from www.mibdepot.com
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.2272.1.52.1.1.1.1.1 | rcTlsTestTdcTestId | 0 | 0 | The unique TDC test ID for this entry. |
| 1.3.6.1.4.1.2272.1.52.1.1.1.1.2 | rcTlsTestTdcTDI | 0 | 0 | The customer TD on which this test is executed. |
| 1.3.6.1.4.1.2272.1.52.1.1.1.1.3 | rcTlsTestTdcSrcPortNum | 0 | 0 | An index value that uniquely identifies the TLS interface (UNI port) at the source of the test. |
| 1.3.6.1.4.1.2272.1.52.1.1.1.1.4 | rcTlsTestTdcDstPortNum | 0 | 0 | An index value that uniquely identifies the destination TLS interface (LAN port). |
| 1.3.6.1.4.1.2272.1.52.1.1.1.1.5 | rcTlsTestTdcSrcPortIP | 0 | 0 | The IP address of the source port or CPU. |
| 1.3.6.1.4.1.2272.1.52.1.1.1.1.6 | rcTlsTestTdcDstPortIP | 0 | 0 | The IP address of the destination port or CPU. |
| 1.3.6.1.4.1.2272.1.52.1.1.1.1.7 | rcTlsTestTdcPktPriority | 0 | 0 | Optional 802.1 network priority to be used for this test. If not specified by the user, the port default priority is assumed. |
| 1.3.6.1.4.1.2272.1.52.1.1.1.1.8 | rcTlsTestTdcPktTimeout | 0 | 0 | Optional timeout period for the TDC test in seconds. If not specified, a default value of 10 seconds will be used. |
| 1.3.6.1.4.1.2272.1.52.1.1.1.1.9 | rcTlsTestTdcProtocol | 0 | 0 | The protocol to use for the TDC test. If not specified by the user, the mode (protocol) of the source UNI port will be assumed. |
| 1.3.6.1.4.1.2272.1.52.1.1.1.1.10 | rcTlsTestTdcTestType | 0 | 0 | Optional target address of the TDC test. For tlsl2 protocol, the options are broadcast and unicast, broadcast only and unicast on… |
| 1.3.6.1.4.1.2272.1.52.1.1.1.1.11 | rcTlsTestTdcTimeTrace | 0 | 0 | Optional data associated with the TDC test. The basic test validates the provisioning associated with the source ports, destinati… |
| 1.3.6.1.4.1.2272.1.52.1.1.1.1.12 | rcTlsTestTdcPriority | 0 | 0 | Boolean value indicating whether the user specified the packet priority or not. |
| 1.3.6.1.4.1.2272.1.52.1.1.1.1.13 | rcTlsTestTdcPktsSent | 0 | 0 | The number of test packets sent. |
| 1.3.6.1.4.1.2272.1.52.1.1.1.1.14 | rcTlsTestTdcPktsReceived | 0 | 0 | The number of test packets received. |
| 1.3.6.1.4.1.2272.1.52.1.1.1.1.15 | rcTlsTestTdcRttBroadcast | 0 | 0 | The round-trip-time of the last broadcast test packet in microseconds. |
| 1.3.6.1.4.1.2272.1.52.1.1.1.1.16 | rcTlsTestTdcRttUnicast | 0 | 0 | The round-trip-time of the last unicast test packet in microseconds. |
| 1.3.6.1.4.1.2272.1.52.1.1.1.1.17 | rcTlsTestTdcPriOpePkt | 0 | 0 | The OPE network priority. (ie. Customer priority mapped into an OPE priority. Same as tlsTDPriority-Map.) |
| 1.3.6.1.4.1.2272.1.52.1.1.1.1.18 | rcTlsTestTdcTestDate | 0 | 0 | The local date stamp for the test (DD/MM). |
| 1.3.6.1.4.1.2272.1.52.1.1.1.1.19 | rcTlsTestTdcTestTime | 0 | 0 | The local time-of-day stamp for the test (HH:MM:SS). |
| 1.3.6.1.4.1.2272.1.52.1.1.1.1.20 | rcTlsTestTdcTraceInfo | 0 | 0 | Boolean value indicating whether the trace info exists for this entry. |
| 1.3.6.1.4.1.2272.1.52.1.1.1.1.21 | rcTlsTestTdcRowStatus | 0 | 0 | Used to create/delete an entry in this table |
| 1.3.6.1.4.1.2272.1.52.1.1.1.1.22 | rcTlsTestTdcAction | 0 | 0 | This action controls test execution: start will exe-cute the test one time; startPeriodic will begin periodic execution of a te… |
| 1.3.6.1.4.1.2272.1.52.1.1.1.1.23 | rcTlsTestTdcResult | 0 | 0 | Result from the last TDC action |
| 1.3.6.1.4.1.2272.1.52.1.1.1.1.24 | rcTlsTestTdcErrorMask | 0 | 0 | The error mask associated with the TDC test. Each bit in the mask represents a specific error. The errors from least significant … |
| 1.3.6.1.4.1.2272.1.52.1.1.1.1.25 | rcTlsTestTdcName | 0 | 0 | An optional user-defined name for this test. A TDC test name must be unique for each test. |
| 1.3.6.1.4.1.2272.1.52.1.1.1.1.26 | rcTlsTestTdcMulticastCnt | 0 | 0 | The number of multicast messages sent with each test. A value of zero(0) means the test will look at the FDB for a valid entry, a… |
| 1.3.6.1.4.1.2272.1.52.1.1.1.1.27 | rcTlsTestTdcUnicastCnt | 0 | 0 | The number of unicast messages sent with each test. |
| 1.3.6.1.4.1.2272.1.52.1.1.1.1.28 | rcTlsTestTdcRepeatCnt | 0 | 0 | The number of times a message sequence is executed per test. |
| 1.3.6.1.4.1.2272.1.52.1.1.1.1.29 | rcTlsTestTdcPeriodicRate | 0 | 0 | Used to set a periodic test rate. The time is in minutes. The time period ranges from once-a-minute (1) to once-a-day (1440). … |
| 1.3.6.1.4.1.2272.1.52.1.1.1.1.30 | rcTlsTestTdcPeriodicCount | 0 | 0 | This object allows the user to place a limit on the number of times a test running periodically shall run. - 0 : Run indefinitely… |
| 1.3.6.1.4.1.2272.1.52.1.1.1.1.31 | rcTlsTestTdcHistoryCnt | 0 | 0 | The number of results to be saved for a given TDC test. The maximum number of results which may be saved by a given device is ob… |
| 1.3.6.1.4.1.2272.1.52.1.1.1.1.32 | rcTlsTestTdcRttThreshold | 0 | 0 | The number of milliseconds allowed for a message to make a round trip journey. Exceeding this threshold can cause the generation … |
| 1.3.6.1.4.1.2272.1.52.1.1.1.1.33 | rcTlsTestTdcSnmpTrapControl | 0 | 0 | Enable or disable the generation of the rcTlsTestTdcTestFailure SNMP trap for this test. |
| 1.3.6.1.4.1.2272.1.52.1.1.1.1.34 | rcTlsTestTdcRttBroadcastMin | 0 | 0 | The minimum round-trip-time, in microseconds, required by a broadcast test packet over for all executions of this test. |
| 1.3.6.1.4.1.2272.1.52.1.1.1.1.35 | rcTlsTestTdcRttBroadcastMax | 0 | 0 | The maximum round-trip-time, in microseconds, required by a broadcast test packet for all executions of this test. |
| 1.3.6.1.4.1.2272.1.52.1.1.1.1.36 | rcTlsTestTdcRttBroadcastAvg | 0 | 0 | The average round-trip-time for a broadcast test packet in microseconds for all executions of this test. |
| 1.3.6.1.4.1.2272.1.52.1.1.1.1.37 | rcTlsTestTdcRttUnicastMin | 0 | 0 | The minimum round-trip-time, in microseconds, required by a unicast test packet for all executions of this test. |
| 1.3.6.1.4.1.2272.1.52.1.1.1.1.38 | rcTlsTestTdcRttUnicastMax | 0 | 0 | The maximum round-trip-time, in microseconds, required by a unicast test packet for all executions of this test. |
| 1.3.6.1.4.1.2272.1.52.1.1.1.1.39 | rcTlsTestTdcRttUnicastAvg | 0 | 0 | The average round-trip-time for a unicast test packet in microseconds for all executions of this test. |
| 1.3.6.1.4.1.2272.1.52.1.1.1.1.40 | rcTlsTestTdcHopCountMin | 0 | 0 | The minimum hop count for all executions of this test. |
| 1.3.6.1.4.1.2272.1.52.1.1.1.1.41 | rcTlsTestTdcHopCountMax | 0 | 0 | The maximum hop count for all executions of this test. |
| 1.3.6.1.4.1.2272.1.52.1.1.1.1.42 | rcTlsTestTdcHopCountAvg | 0 | 0 | The average hop count all executions of this test. |
| 1.3.6.1.4.1.2272.1.52.1.1.1.1.43 | rcTlsTestTdcClearHistoryAction | 0 | 0 | The clear option removes all stored test results for this test including the most recent test result. The clear option has no af… |
| 1.3.6.1.4.1.2272.1.52.1.1.1.1.44 | rcTlsTestTdcScheduled | 0 | 0 | Indicates whether this test is currently scheduled to execute in periodic mode. A TRUE response indicates the test is scheduled … |
| 1.3.6.1.4.1.2272.1.52.1.1.1.1.45 | rcTlsTestTdcCurrentPeriodicCount | 0 | 0 | This object returns the current value of the periodic counter. If the value had been set greater than zero and the test is curr… |
| 1.3.6.1.4.1.2272.1.52.1.1.1.1.46 | rcTlsTestTdcQtag | 0 | 0 | TDC test Qtag, it is 0 by default. It means the first Qtag of the Tls Endpoint |