The error mask associated with the TDC test. Each bit
in the mask represents a specific error. The errors
from least significant bit to highest significant bit
are:
bit 1 - TD nonexistent on destination port
bit 2 - TD disabled on destination port
bit 3 - TD not assigned to destination port
bit 4 - TD filtered on destination NNI port
bit 5 - destination port is NNI
bit 6 - destination port is craft
bit 7 - destination FDB test failed
bit 8 - destination administrative state down
bit 9 - destination operational state down
bit 10 - destination port connectivity mismatch error
bit 11 - destination port type mismatch
bit 12 - destination port mode mismatch error
bit 13 - destination MIB query failed
bit 14 - destination system error
bit 15 - invalid destination port
bit 16 - destination port is CPU
bit 17 - destination port mode mismatch warning
bit 18 - destination port connectivity mismatch warning
bit 19 - default priority used on destination
bit 20 - IP not assigned on destination oel2 port
bit 21 - static entry exists on destination port
bit 22 - destination FDB table full warning
bit 25 - Source Uni Not configured for TDC test.
bit 26 - Source Uni Endpoint Admin State Disable for TDC test.
bit 27 - Source Uni endpoint or TDI not configured for TDC test.
bit 33 - TD nonexistent on source port
bit 34 - TD not assigned to source port
bit 35 - source FDB test failed
bit 36 - source administrative state down
bit 37 - source operational state down
bit 38 - source system error
bit 39 - no response
bit 40 - could not get trace information
bit 41 - could not get time information
bit 42 - source MIB query failed
bit 43 - TD disabled on source port
bit 44 - invalid source port
bit 45 - all ports down on the source node
bit 46 - unknown error
bit 47 - source FDB test failed
bit 48 - static entry exists on source port
bit 49 - no FDB entry for destination MAC, unicast aborted
bit 50 \226 RTT threshold exceeded
Parsed from file RC-TLS-MIB.mib.txt
Company: avaya
Module: RC-TLS-MIB
rcTlsTestTdcErrorMask OBJECT-TYPE SYNTAX BITS { unused0(0), bit1(1), bit2(2), bit3(3), bit4(4), bit5(5), bit6(6), bit7(7), bit8(8), bit9(9), bit10(10), bit11(11), bit12(12), bit13(13), bit14(14), bit15(15), bit16(16), bit17(17), bit18(18), bit19(19), bit20(20), bit21(21), bit22(22), unused23(23), unused24(24), bit25(25), bit26(26), bit27(27), unused28(28), unused29(29), unused30(30), unused31(31), unused32(32), bit33(33), bit34(34), bit35(35), bit36(36), bit37(37), bit38(38), bit39(39), bit40(40), bit41(41), bit42(42), bit43(43), bit44(44), bit45(45), bit46(46), bit47(47), bit48(48), bit49(49), bit50(50) } MAX-ACCESS read-only STATUS current DESCRIPTION "The error mask associated with the TDC test. Each bit in the mask represents a specific error. The errors from least significant bit to highest significant bit are: bit 1 - TD nonexistent on destination port bit 2 - TD disabled on destination port bit 3 - TD not assigned to destination port bit 4 - TD filtered on destination NNI port bit 5 - destination port is NNI bit 6 - destination port is craft bit 7 - destination FDB test failed bit 8 - destination administrative state down bit 9 - destination operational state down bit 10 - destination port connectivity mismatch error bit 11 - destination port type mismatch bit 12 - destination port mode mismatch error bit 13 - destination MIB query failed bit 14 - destination system error bit 15 - invalid destination port bit 16 - destination port is CPU bit 17 - destination port mode mismatch warning bit 18 - destination port connectivity mismatch warning bit 19 - default priority used on destination bit 20 - IP not assigned on destination oel2 port bit 21 - static entry exists on destination port bit 22 - destination FDB table full warning bit 25 - Source Uni Not configured for TDC test. bit 26 - Source Uni Endpoint Admin State Disable for TDC test. bit 27 - Source Uni endpoint or TDI not configured for TDC test. bit 33 - TD nonexistent on source port bit 34 - TD not assigned to source port bit 35 - source FDB test failed bit 36 - source administrative state down bit 37 - source operational state down bit 38 - source system error bit 39 - no response bit 40 - could not get trace information bit 41 - could not get time information bit 42 - source MIB query failed bit 43 - TD disabled on source port bit 44 - invalid source port bit 45 - all ports down on the source node bit 46 - unknown error bit 47 - source FDB test failed bit 48 - static entry exists on source port bit 49 - no FDB entry for destination MAC, unicast aborted bit 50 \226 RTT threshold exceeded" ::= { rcTlsTestTdcEntry 24 }
Vendor: Avaya
Module: RC-TLS-MIB (RC-TLS-MIB.mib)
Type: TABULAR
Access: read-only
Syntax: BITS
Automatically extracted from www.mibdepot.com
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.2272.1.52.1.1.1.1.1 | rcTlsTestTdcTestId | 0 | 0 | The unique TDC test ID for this entry. |
| 1.3.6.1.4.1.2272.1.52.1.1.1.1.2 | rcTlsTestTdcTDI | 0 | 0 | The customer TD on which this test is executed. |
| 1.3.6.1.4.1.2272.1.52.1.1.1.1.3 | rcTlsTestTdcSrcPortNum | 0 | 0 | An index value that uniquely identifies the TLS interface (UNI port) at the source of the test. |
| 1.3.6.1.4.1.2272.1.52.1.1.1.1.4 | rcTlsTestTdcDstPortNum | 0 | 0 | An index value that uniquely identifies the destination TLS interface (LAN port). |
| 1.3.6.1.4.1.2272.1.52.1.1.1.1.5 | rcTlsTestTdcSrcPortIP | 0 | 0 | The IP address of the source port or CPU. |
| 1.3.6.1.4.1.2272.1.52.1.1.1.1.6 | rcTlsTestTdcDstPortIP | 0 | 0 | The IP address of the destination port or CPU. |
| 1.3.6.1.4.1.2272.1.52.1.1.1.1.7 | rcTlsTestTdcPktPriority | 0 | 0 | Optional 802.1 network priority to be used for this test. If not specified by the user, the port default priority is assumed. |
| 1.3.6.1.4.1.2272.1.52.1.1.1.1.8 | rcTlsTestTdcPktTimeout | 0 | 0 | Optional timeout period for the TDC test in seconds. If not specified, a default value of 10 seconds will be used. |
| 1.3.6.1.4.1.2272.1.52.1.1.1.1.9 | rcTlsTestTdcProtocol | 0 | 0 | The protocol to use for the TDC test. If not specified by the user, the mode (protocol) of the source UNI port will be assumed. |
| 1.3.6.1.4.1.2272.1.52.1.1.1.1.10 | rcTlsTestTdcTestType | 0 | 0 | Optional target address of the TDC test. For tlsl2 protocol, the options are broadcast and unicast, broadcast only and unicast on… |
| 1.3.6.1.4.1.2272.1.52.1.1.1.1.11 | rcTlsTestTdcTimeTrace | 0 | 0 | Optional data associated with the TDC test. The basic test validates the provisioning associated with the source ports, destinati… |
| 1.3.6.1.4.1.2272.1.52.1.1.1.1.12 | rcTlsTestTdcPriority | 0 | 0 | Boolean value indicating whether the user specified the packet priority or not. |
| 1.3.6.1.4.1.2272.1.52.1.1.1.1.13 | rcTlsTestTdcPktsSent | 0 | 0 | The number of test packets sent. |
| 1.3.6.1.4.1.2272.1.52.1.1.1.1.14 | rcTlsTestTdcPktsReceived | 0 | 0 | The number of test packets received. |
| 1.3.6.1.4.1.2272.1.52.1.1.1.1.15 | rcTlsTestTdcRttBroadcast | 0 | 0 | The round-trip-time of the last broadcast test packet in microseconds. |
| 1.3.6.1.4.1.2272.1.52.1.1.1.1.16 | rcTlsTestTdcRttUnicast | 0 | 0 | The round-trip-time of the last unicast test packet in microseconds. |
| 1.3.6.1.4.1.2272.1.52.1.1.1.1.17 | rcTlsTestTdcPriOpePkt | 0 | 0 | The OPE network priority. (ie. Customer priority mapped into an OPE priority. Same as tlsTDPriority-Map.) |
| 1.3.6.1.4.1.2272.1.52.1.1.1.1.18 | rcTlsTestTdcTestDate | 0 | 0 | The local date stamp for the test (DD/MM). |
| 1.3.6.1.4.1.2272.1.52.1.1.1.1.19 | rcTlsTestTdcTestTime | 0 | 0 | The local time-of-day stamp for the test (HH:MM:SS). |
| 1.3.6.1.4.1.2272.1.52.1.1.1.1.20 | rcTlsTestTdcTraceInfo | 0 | 0 | Boolean value indicating whether the trace info exists for this entry. |
| 1.3.6.1.4.1.2272.1.52.1.1.1.1.21 | rcTlsTestTdcRowStatus | 0 | 0 | Used to create/delete an entry in this table |
| 1.3.6.1.4.1.2272.1.52.1.1.1.1.22 | rcTlsTestTdcAction | 0 | 0 | This action controls test execution: start will exe-cute the test one time; startPeriodic will begin periodic execution of a te… |
| 1.3.6.1.4.1.2272.1.52.1.1.1.1.23 | rcTlsTestTdcResult | 0 | 0 | Result from the last TDC action |
| 1.3.6.1.4.1.2272.1.52.1.1.1.1.25 | rcTlsTestTdcName | 0 | 0 | An optional user-defined name for this test. A TDC test name must be unique for each test. |
| 1.3.6.1.4.1.2272.1.52.1.1.1.1.26 | rcTlsTestTdcMulticastCnt | 0 | 0 | The number of multicast messages sent with each test. A value of zero(0) means the test will look at the FDB for a valid entry, a… |
| 1.3.6.1.4.1.2272.1.52.1.1.1.1.27 | rcTlsTestTdcUnicastCnt | 0 | 0 | The number of unicast messages sent with each test. |
| 1.3.6.1.4.1.2272.1.52.1.1.1.1.28 | rcTlsTestTdcRepeatCnt | 0 | 0 | The number of times a message sequence is executed per test. |
| 1.3.6.1.4.1.2272.1.52.1.1.1.1.29 | rcTlsTestTdcPeriodicRate | 0 | 0 | Used to set a periodic test rate. The time is in minutes. The time period ranges from once-a-minute (1) to once-a-day (1440). … |
| 1.3.6.1.4.1.2272.1.52.1.1.1.1.30 | rcTlsTestTdcPeriodicCount | 0 | 0 | This object allows the user to place a limit on the number of times a test running periodically shall run. - 0 : Run indefinitely… |
| 1.3.6.1.4.1.2272.1.52.1.1.1.1.31 | rcTlsTestTdcHistoryCnt | 0 | 0 | The number of results to be saved for a given TDC test. The maximum number of results which may be saved by a given device is ob… |
| 1.3.6.1.4.1.2272.1.52.1.1.1.1.32 | rcTlsTestTdcRttThreshold | 0 | 0 | The number of milliseconds allowed for a message to make a round trip journey. Exceeding this threshold can cause the generation … |
| 1.3.6.1.4.1.2272.1.52.1.1.1.1.33 | rcTlsTestTdcSnmpTrapControl | 0 | 0 | Enable or disable the generation of the rcTlsTestTdcTestFailure SNMP trap for this test. |
| 1.3.6.1.4.1.2272.1.52.1.1.1.1.34 | rcTlsTestTdcRttBroadcastMin | 0 | 0 | The minimum round-trip-time, in microseconds, required by a broadcast test packet over for all executions of this test. |
| 1.3.6.1.4.1.2272.1.52.1.1.1.1.35 | rcTlsTestTdcRttBroadcastMax | 0 | 0 | The maximum round-trip-time, in microseconds, required by a broadcast test packet for all executions of this test. |
| 1.3.6.1.4.1.2272.1.52.1.1.1.1.36 | rcTlsTestTdcRttBroadcastAvg | 0 | 0 | The average round-trip-time for a broadcast test packet in microseconds for all executions of this test. |
| 1.3.6.1.4.1.2272.1.52.1.1.1.1.37 | rcTlsTestTdcRttUnicastMin | 0 | 0 | The minimum round-trip-time, in microseconds, required by a unicast test packet for all executions of this test. |
| 1.3.6.1.4.1.2272.1.52.1.1.1.1.38 | rcTlsTestTdcRttUnicastMax | 0 | 0 | The maximum round-trip-time, in microseconds, required by a unicast test packet for all executions of this test. |
| 1.3.6.1.4.1.2272.1.52.1.1.1.1.39 | rcTlsTestTdcRttUnicastAvg | 0 | 0 | The average round-trip-time for a unicast test packet in microseconds for all executions of this test. |
| 1.3.6.1.4.1.2272.1.52.1.1.1.1.40 | rcTlsTestTdcHopCountMin | 0 | 0 | The minimum hop count for all executions of this test. |
| 1.3.6.1.4.1.2272.1.52.1.1.1.1.41 | rcTlsTestTdcHopCountMax | 0 | 0 | The maximum hop count for all executions of this test. |
| 1.3.6.1.4.1.2272.1.52.1.1.1.1.42 | rcTlsTestTdcHopCountAvg | 0 | 0 | The average hop count all executions of this test. |
| 1.3.6.1.4.1.2272.1.52.1.1.1.1.43 | rcTlsTestTdcClearHistoryAction | 0 | 0 | The clear option removes all stored test results for this test including the most recent test result. The clear option has no af… |
| 1.3.6.1.4.1.2272.1.52.1.1.1.1.44 | rcTlsTestTdcScheduled | 0 | 0 | Indicates whether this test is currently scheduled to execute in periodic mode. A TRUE response indicates the test is scheduled … |
| 1.3.6.1.4.1.2272.1.52.1.1.1.1.45 | rcTlsTestTdcCurrentPeriodicCount | 0 | 0 | This object returns the current value of the periodic counter. If the value had been set greater than zero and the test is curr… |
| 1.3.6.1.4.1.2272.1.52.1.1.1.1.46 | rcTlsTestTdcQtag | 0 | 0 | TDC test Qtag, it is 0 by default. It means the first Qtag of the Tls Endpoint |