Optional target address of the TDC test. For tlsl2
protocol, the options are broadcast and unicast,
broadcast only and unicast only. For oel2 protocol,
the options are multicast and unicast, multicast only
and unicast only. By default, tlsl2 tests use broadcast
and unicast while oel2 tests use multicast and uni-cast.
Parsed from file RC-TLS-MIB.mib.txt
Company: avaya
Module: RC-TLS-MIB
rcTlsTestTdcTestType OBJECT-TYPE SYNTAX INTEGER { broadcastandunicast(1), broadcast(2), unicast(3), multicastandunicast(4), multicast(5) } MAX-ACCESS read-write STATUS current DESCRIPTION "Optional target address of the TDC test. For tlsl2 protocol, the options are broadcast and unicast, broadcast only and unicast only. For oel2 protocol, the options are multicast and unicast, multicast only and unicast only. By default, tlsl2 tests use broadcast and unicast while oel2 tests use multicast and uni-cast." ::= { rcTlsTestTdcEntry 10 }
Vendor: Avaya
Module: RC-TLS-MIB (RC-TLS-MIB.mib)
Type: TABULAR
Access: read-write
Syntax: INTEGER
Automatically extracted from www.mibdepot.com
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.2272.1.52.1.1.1.1.1 | rcTlsTestTdcTestId | 0 | 0 | The unique TDC test ID for this entry. |
| 1.3.6.1.4.1.2272.1.52.1.1.1.1.2 | rcTlsTestTdcTDI | 0 | 0 | The customer TD on which this test is executed. |
| 1.3.6.1.4.1.2272.1.52.1.1.1.1.3 | rcTlsTestTdcSrcPortNum | 0 | 0 | An index value that uniquely identifies the TLS interface (UNI port) at the source of the test. |
| 1.3.6.1.4.1.2272.1.52.1.1.1.1.4 | rcTlsTestTdcDstPortNum | 0 | 0 | An index value that uniquely identifies the destination TLS interface (LAN port). |
| 1.3.6.1.4.1.2272.1.52.1.1.1.1.5 | rcTlsTestTdcSrcPortIP | 0 | 0 | The IP address of the source port or CPU. |
| 1.3.6.1.4.1.2272.1.52.1.1.1.1.6 | rcTlsTestTdcDstPortIP | 0 | 0 | The IP address of the destination port or CPU. |
| 1.3.6.1.4.1.2272.1.52.1.1.1.1.7 | rcTlsTestTdcPktPriority | 0 | 0 | Optional 802.1 network priority to be used for this test. If not specified by the user, the port default priority is assumed. |
| 1.3.6.1.4.1.2272.1.52.1.1.1.1.8 | rcTlsTestTdcPktTimeout | 0 | 0 | Optional timeout period for the TDC test in seconds. If not specified, a default value of 10 seconds will be used. |
| 1.3.6.1.4.1.2272.1.52.1.1.1.1.9 | rcTlsTestTdcProtocol | 0 | 0 | The protocol to use for the TDC test. If not specified by the user, the mode (protocol) of the source UNI port will be assumed. |
| 1.3.6.1.4.1.2272.1.52.1.1.1.1.11 | rcTlsTestTdcTimeTrace | 0 | 0 | Optional data associated with the TDC test. The basic test validates the provisioning associated with the source ports, destinati… |
| 1.3.6.1.4.1.2272.1.52.1.1.1.1.12 | rcTlsTestTdcPriority | 0 | 0 | Boolean value indicating whether the user specified the packet priority or not. |
| 1.3.6.1.4.1.2272.1.52.1.1.1.1.13 | rcTlsTestTdcPktsSent | 0 | 0 | The number of test packets sent. |
| 1.3.6.1.4.1.2272.1.52.1.1.1.1.14 | rcTlsTestTdcPktsReceived | 0 | 0 | The number of test packets received. |
| 1.3.6.1.4.1.2272.1.52.1.1.1.1.15 | rcTlsTestTdcRttBroadcast | 0 | 0 | The round-trip-time of the last broadcast test packet in microseconds. |
| 1.3.6.1.4.1.2272.1.52.1.1.1.1.16 | rcTlsTestTdcRttUnicast | 0 | 0 | The round-trip-time of the last unicast test packet in microseconds. |
| 1.3.6.1.4.1.2272.1.52.1.1.1.1.17 | rcTlsTestTdcPriOpePkt | 0 | 0 | The OPE network priority. (ie. Customer priority mapped into an OPE priority. Same as tlsTDPriority-Map.) |
| 1.3.6.1.4.1.2272.1.52.1.1.1.1.18 | rcTlsTestTdcTestDate | 0 | 0 | The local date stamp for the test (DD/MM). |
| 1.3.6.1.4.1.2272.1.52.1.1.1.1.19 | rcTlsTestTdcTestTime | 0 | 0 | The local time-of-day stamp for the test (HH:MM:SS). |
| 1.3.6.1.4.1.2272.1.52.1.1.1.1.20 | rcTlsTestTdcTraceInfo | 0 | 0 | Boolean value indicating whether the trace info exists for this entry. |
| 1.3.6.1.4.1.2272.1.52.1.1.1.1.21 | rcTlsTestTdcRowStatus | 0 | 0 | Used to create/delete an entry in this table |
| 1.3.6.1.4.1.2272.1.52.1.1.1.1.22 | rcTlsTestTdcAction | 0 | 0 | This action controls test execution: start will exe-cute the test one time; startPeriodic will begin periodic execution of a te… |
| 1.3.6.1.4.1.2272.1.52.1.1.1.1.23 | rcTlsTestTdcResult | 0 | 0 | Result from the last TDC action |
| 1.3.6.1.4.1.2272.1.52.1.1.1.1.24 | rcTlsTestTdcErrorMask | 0 | 0 | The error mask associated with the TDC test. Each bit in the mask represents a specific error. The errors from least significant … |
| 1.3.6.1.4.1.2272.1.52.1.1.1.1.25 | rcTlsTestTdcName | 0 | 0 | An optional user-defined name for this test. A TDC test name must be unique for each test. |
| 1.3.6.1.4.1.2272.1.52.1.1.1.1.26 | rcTlsTestTdcMulticastCnt | 0 | 0 | The number of multicast messages sent with each test. A value of zero(0) means the test will look at the FDB for a valid entry, a… |
| 1.3.6.1.4.1.2272.1.52.1.1.1.1.27 | rcTlsTestTdcUnicastCnt | 0 | 0 | The number of unicast messages sent with each test. |
| 1.3.6.1.4.1.2272.1.52.1.1.1.1.28 | rcTlsTestTdcRepeatCnt | 0 | 0 | The number of times a message sequence is executed per test. |
| 1.3.6.1.4.1.2272.1.52.1.1.1.1.29 | rcTlsTestTdcPeriodicRate | 0 | 0 | Used to set a periodic test rate. The time is in minutes. The time period ranges from once-a-minute (1) to once-a-day (1440). … |
| 1.3.6.1.4.1.2272.1.52.1.1.1.1.30 | rcTlsTestTdcPeriodicCount | 0 | 0 | This object allows the user to place a limit on the number of times a test running periodically shall run. - 0 : Run indefinitely… |
| 1.3.6.1.4.1.2272.1.52.1.1.1.1.31 | rcTlsTestTdcHistoryCnt | 0 | 0 | The number of results to be saved for a given TDC test. The maximum number of results which may be saved by a given device is ob… |
| 1.3.6.1.4.1.2272.1.52.1.1.1.1.32 | rcTlsTestTdcRttThreshold | 0 | 0 | The number of milliseconds allowed for a message to make a round trip journey. Exceeding this threshold can cause the generation … |
| 1.3.6.1.4.1.2272.1.52.1.1.1.1.33 | rcTlsTestTdcSnmpTrapControl | 0 | 0 | Enable or disable the generation of the rcTlsTestTdcTestFailure SNMP trap for this test. |
| 1.3.6.1.4.1.2272.1.52.1.1.1.1.34 | rcTlsTestTdcRttBroadcastMin | 0 | 0 | The minimum round-trip-time, in microseconds, required by a broadcast test packet over for all executions of this test. |
| 1.3.6.1.4.1.2272.1.52.1.1.1.1.35 | rcTlsTestTdcRttBroadcastMax | 0 | 0 | The maximum round-trip-time, in microseconds, required by a broadcast test packet for all executions of this test. |
| 1.3.6.1.4.1.2272.1.52.1.1.1.1.36 | rcTlsTestTdcRttBroadcastAvg | 0 | 0 | The average round-trip-time for a broadcast test packet in microseconds for all executions of this test. |
| 1.3.6.1.4.1.2272.1.52.1.1.1.1.37 | rcTlsTestTdcRttUnicastMin | 0 | 0 | The minimum round-trip-time, in microseconds, required by a unicast test packet for all executions of this test. |
| 1.3.6.1.4.1.2272.1.52.1.1.1.1.38 | rcTlsTestTdcRttUnicastMax | 0 | 0 | The maximum round-trip-time, in microseconds, required by a unicast test packet for all executions of this test. |
| 1.3.6.1.4.1.2272.1.52.1.1.1.1.39 | rcTlsTestTdcRttUnicastAvg | 0 | 0 | The average round-trip-time for a unicast test packet in microseconds for all executions of this test. |
| 1.3.6.1.4.1.2272.1.52.1.1.1.1.40 | rcTlsTestTdcHopCountMin | 0 | 0 | The minimum hop count for all executions of this test. |
| 1.3.6.1.4.1.2272.1.52.1.1.1.1.41 | rcTlsTestTdcHopCountMax | 0 | 0 | The maximum hop count for all executions of this test. |
| 1.3.6.1.4.1.2272.1.52.1.1.1.1.42 | rcTlsTestTdcHopCountAvg | 0 | 0 | The average hop count all executions of this test. |
| 1.3.6.1.4.1.2272.1.52.1.1.1.1.43 | rcTlsTestTdcClearHistoryAction | 0 | 0 | The clear option removes all stored test results for this test including the most recent test result. The clear option has no af… |
| 1.3.6.1.4.1.2272.1.52.1.1.1.1.44 | rcTlsTestTdcScheduled | 0 | 0 | Indicates whether this test is currently scheduled to execute in periodic mode. A TRUE response indicates the test is scheduled … |
| 1.3.6.1.4.1.2272.1.52.1.1.1.1.45 | rcTlsTestTdcCurrentPeriodicCount | 0 | 0 | This object returns the current value of the periodic counter. If the value had been set greater than zero and the test is curr… |
| 1.3.6.1.4.1.2272.1.52.1.1.1.1.46 | rcTlsTestTdcQtag | 0 | 0 | TDC test Qtag, it is 0 by default. It means the first Qtag of the Tls Endpoint |