Vendor: Fujitsu Siemens Computers
Module: XLDV20-MIB
[Automatically extracted from oidview.com]
xldv20SdcControl OBJECT IDENTIFIER ::= { xldv20Tlm 12 }
xldv20SdcControl OBJECT IDENTIFIER ::= { xldv20Tlm 12 }
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.231.7.1.2.1.1.4.4.12.1 | xldv20SdcCtrlControlReq | 1 | 1 | To activate a configured set of data (command: activateData). |
1.3.6.1.4.1.231.7.1.2.1.1.4.4.12.2 | xldv20SdcCtrlControlStatus | 1 | 1 | Indicates the status of a control request. |
1.3.6.1.4.1.231.7.1.2.1.1.4.4.12.3 | xldv20SdcCtrlIfIndex | 1 | 1 | Index to identify a sdc PPTP. |
1.3.6.1.4.1.231.7.1.2.1.1.4.4.12.4 | xldv20SdcCtrlRate | 1 | 1 | Desired SDSL data rate. The supported line rates ranges from 160 and 2320 Kbit/sec. The cell rate range is between 377 and 5471 c… |
1.3.6.1.4.1.231.7.1.2.1.1.4.4.12.5 | xldv20SdcCtrlXdslServiceType | 1 | 1 | The service mode for the SDSL line. |
1.3.6.1.4.1.231.7.1.2.1.1.4.4.12.6 | xldv20SdcCtrlControlReqResult | 1 | 1 | The result of the last user command. |
1.3.6.1.4.1.231.7.1.2.1.1.4.4.12.7 | xldv20SdcCtrlControlTimeStamp | 1 | 1 | The time stamp of the last command (end of command). |
1.3.6.1.4.1.231.7.1.2.1.1.4.4.12.8 | xldv20SdcCtrlMinMarginUp | 1 | 1 | The desired threshold for upstream margin when an alarm should be sent (in units of dB). |
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.231.7.1.2.1.1.4.4.1 | xldv20IfTable | 1 | 12 | xldv20Iftable |
1.3.6.1.4.1.231.7.1.2.1.1.4.4.2 | xldv20AdcControl | 17 | 34 | None |
1.3.6.1.4.1.231.7.1.2.1.1.4.4.3 | xldv20VdcControl | 17 | 34 | None |
1.3.6.1.4.1.231.7.1.2.1.1.4.4.4 | xldv20AdcPPTPTable | 1 | 29 | The physical path termination point table for ADSL Central interface. |
1.3.6.1.4.1.231.7.1.2.1.1.4.4.5 | xldv20VdcPPTPTable | 1 | 21 | Feature not supported. The physical path termination point table for VDSL C. |
1.3.6.1.4.1.231.7.1.2.1.1.4.4.6 | xldv20IbmPPTPTable | 1 | 3 | The physical path termination point table for the IBM IF. |
1.3.6.1.4.1.231.7.1.2.1.1.4.4.7 | xldv20Ds3NePPTPTable | 1 | 6 | The near end physical path termination point table for the DS3 interface. |
1.3.6.1.4.1.231.7.1.2.1.1.4.4.8 | xldv20E3NePPTPTable | 1 | 11 | The physical path termination point table for the E3 IF. |
1.3.6.1.4.1.231.7.1.2.1.1.4.4.9 | xldv20Stm1NePPTPTable | 1 | 15 | The physical path termination point table for the STM1 IF. |
1.3.6.1.4.1.231.7.1.2.1.1.4.4.10 | xldv20Sts3NePPTPTable | 1 | 17 | The physical path termination point table for the STS3c IF. |
1.3.6.1.4.1.231.7.1.2.1.1.4.4.11 | xldv20Dsx1ConfigTable | 1 | 7 | The DS1 Configuration table. |
1.3.6.1.4.1.231.7.1.2.1.1.4.4.13 | xldv20SdcPPTPTable | 1 | 16 | The physical path termination point table for SDSL C. |