Vendor: Fujitsu Siemens Computers
Module: XLDV20-MIB
[Automatically extracted from oidview.com]
xldv20AdcControl OBJECT IDENTIFIER ::= { xldv20Tlm 2 }
xldv20AdcControl OBJECT IDENTIFIER ::= { xldv20Tlm 2 }
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.231.7.1.2.1.1.4.4.2.1 | xldv20AdcCtrlControlReq | 1 | 1 | ADSL control request object to activate a configured set of data (command: activateData), which includes minimum and maximum band… |
1.3.6.1.4.1.231.7.1.2.1.1.4.4.2.2 | xldv20AdcCtrlControlStatus | 1 | 1 | The status of a control request. |
1.3.6.1.4.1.231.7.1.2.1.1.4.4.2.3 | xldv20AdcCtrlIfIndex | 1 | 1 | It is the relevant interface index of the ADSL central PPTP. |
1.3.6.1.4.1.231.7.1.2.1.1.4.4.2.4 | xldv20AdcCtrlMinRateDn | 1 | 1 | Desired lower limit of downstream data rate. The data rate ranges from 32 to 8096 Kbit/sec and is splitted into units of 32 Kbit… |
1.3.6.1.4.1.231.7.1.2.1.1.4.4.2.5 | xldv20AdcCtrlMinRateUp | 1 | 1 | Desired lower limit of upstream data rate. The data rate ranges from 32 to 768 Kbit/sec and is splitted into units of 32 Kbit/se… |
1.3.6.1.4.1.231.7.1.2.1.1.4.4.2.6 | xldv20AdcCtrlMaxRateDn | 1 | 1 | Desired upper limit of downstream data rate. The data rate ranges from 32 and 8096 Kbit/sec and is splitted into units of 32 Kbit… |
1.3.6.1.4.1.231.7.1.2.1.1.4.4.2.7 | xldv20AdcCtrlMaxRateUp | 1 | 1 | Desired upper limit of upstream data rate. The data rate ranges from 32 and 768 Kbit/sec and is splitted into units of 32 Kbit/s… |
1.3.6.1.4.1.231.7.1.2.1.1.4.4.2.8 | xldv20AdcCtrlMarginDn | 1 | 1 | Desired downstream margin in units of dB. |
1.3.6.1.4.1.231.7.1.2.1.1.4.4.2.9 | xldv20AdcCtrlMarginUp | 1 | 1 | Desired upstream margin in units of dB . |
1.3.6.1.4.1.231.7.1.2.1.1.4.4.2.10 | xldv20AdcCtrlLatencyDn | 1 | 1 | Selects fast mode or interleaved mode downstream. 0 = interleavedLow (default). 1 = interleavedHigh . 256 = fast mode. |
1.3.6.1.4.1.231.7.1.2.1.1.4.4.2.11 | xldv20AdcCtrlLatencyUp | 1 | 1 | Selects fast mode or interleaved mode upstream. 0 = interleavedLow (default). 1 = interleavedHigh . 256 = fast mode. |
1.3.6.1.4.1.231.7.1.2.1.1.4.4.2.12 | xldv20AdcCtrlMinMarginDn | 1 | 1 | Threshold for downstream margin when an alarm should be sent. In units of dB. The value auto is the default value and means that t… |
1.3.6.1.4.1.231.7.1.2.1.1.4.4.2.13 | xldv20AdcCtrlMinMarginUp | 1 | 1 | Threshold for upstream margin when an alarm should be sent. In units of dB. The value auto is the default value and means that the… |
1.3.6.1.4.1.231.7.1.2.1.1.4.4.2.14 | xldv20AdcCtrlControlReqResult | 1 | 1 | The result of the last user command. |
1.3.6.1.4.1.231.7.1.2.1.1.4.4.2.15 | xldv20AdcCtrlXdslServiceType | 1 | 1 | The service mode for the DSL line according to ITU norm. Supported modes are : - gDotHsMode (handshake mode) for automatic link u… |
1.3.6.1.4.1.231.7.1.2.1.1.4.4.2.16 | xldv20AdcCtrlControlTimeStamp | 1 | 1 | The time stamp of the last command (end of command). |
1.3.6.1.4.1.231.7.1.2.1.1.4.4.2.17 | xldv20AdcCtrlTrainingMode | 1 | 1 | Selects between different training modes for ADSL modems. |
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.231.7.1.2.1.1.4.4.1 | xldv20IfTable | 1 | 12 | xldv20Iftable |
1.3.6.1.4.1.231.7.1.2.1.1.4.4.3 | xldv20VdcControl | 17 | 34 | None |
1.3.6.1.4.1.231.7.1.2.1.1.4.4.4 | xldv20AdcPPTPTable | 1 | 29 | The physical path termination point table for ADSL Central interface. |
1.3.6.1.4.1.231.7.1.2.1.1.4.4.5 | xldv20VdcPPTPTable | 1 | 21 | Feature not supported. The physical path termination point table for VDSL C. |
1.3.6.1.4.1.231.7.1.2.1.1.4.4.6 | xldv20IbmPPTPTable | 1 | 3 | The physical path termination point table for the IBM IF. |
1.3.6.1.4.1.231.7.1.2.1.1.4.4.7 | xldv20Ds3NePPTPTable | 1 | 6 | The near end physical path termination point table for the DS3 interface. |
1.3.6.1.4.1.231.7.1.2.1.1.4.4.8 | xldv20E3NePPTPTable | 1 | 11 | The physical path termination point table for the E3 IF. |
1.3.6.1.4.1.231.7.1.2.1.1.4.4.9 | xldv20Stm1NePPTPTable | 1 | 15 | The physical path termination point table for the STM1 IF. |
1.3.6.1.4.1.231.7.1.2.1.1.4.4.10 | xldv20Sts3NePPTPTable | 1 | 17 | The physical path termination point table for the STS3c IF. |
1.3.6.1.4.1.231.7.1.2.1.1.4.4.11 | xldv20Dsx1ConfigTable | 1 | 7 | The DS1 Configuration table. |
1.3.6.1.4.1.231.7.1.2.1.1.4.4.12 | xldv20SdcControl | 8 | 16 | None |
1.3.6.1.4.1.231.7.1.2.1.1.4.4.13 | xldv20SdcPPTPTable | 1 | 16 | The physical path termination point table for SDSL C. |