Increment Counter by one for each time a valid-length packet was
received by this port and there was at least one occurrence of an
invalid data symbol. This counter can increment only once per valid
carrier event. A collision presence at any port of the repeater
will not cause this counter to increment. This object is valid for
100Mbps repeaters only. For requests on 10Mbps repeaters, this
object returns 0.
Parsed from file Compaq-n2fe.mib.txt
Company: compaq
Module: CPQN2FE-MIB
n2feTen100SwPortCodingErrors OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Increment Counter by one for each time a valid-length packet was received by this port and there was at least one occurrence of an invalid data symbol. This counter can increment only once per valid carrier event. A collision presence at any port of the repeater will not cause this counter to increment. This object is valid for 100Mbps repeaters only. For requests on 10Mbps repeaters, this object returns 0." ::= { n2feTen100SwPortInfoEntry 15 }
Vendor: Compaq
Module: CPQN2FE-MIB (Compaq-n2fe.mib)
Type: TABULAR
Access: read-only
Syntax: Counter
Automatically extracted from www.mibdepot.com
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.232.101.1.3.11.2.2.1.1 | n2feTen100SwPortId | 0 | 0 | The port ID of the switch port being queried. |
1.3.6.1.4.1.232.101.1.3.11.2.2.1.2 | n2feTen100SwPortJabberInfo | 0 | 0 | This object indicates whether or not the port is getting excessively long receptions. When the carrier reaches 65535 bit times, … |
1.3.6.1.4.1.232.101.1.3.11.2.2.1.3 | n2feTen100SwPortResetStatus | 0 | 0 | This object allows the user to reset the 100Mbps repeater port that is connected to the internal 10/100 switch without affecting… |
1.3.6.1.4.1.232.101.1.3.11.2.2.1.4 | n2feTen100SwPortReadableFrames | 0 | 0 | Increment Counter by one for each frame whose OctetCount is greater than or equal to minFrameSize and less than or equal to maxFr… |
1.3.6.1.4.1.232.101.1.3.11.2.2.1.5 | n2feTen100SwPortReadableOctets | 0 | 0 | Increment Counter by OctetCount for each frame which has been determined to be a readable frame. Note: The approximate minimum t… |
1.3.6.1.4.1.232.101.1.3.11.2.2.1.6 | n2feTen100SwPortFCSErrors | 0 | 0 | Increment Counter by one for each frame with FCSError and without FramingError and whose OctetCount is greater than or equal to m… |
1.3.6.1.4.1.232.101.1.3.11.2.2.1.7 | n2feTen100SwPortAlignmentErrors | 0 | 0 | Increment Counter by one for each frame with FCSError and FramingError and whose octetCount is greater than or equal to minFrameS… |
1.3.6.1.4.1.232.101.1.3.11.2.2.1.8 | n2feTen100SwPortFramesTooLong | 0 | 0 | Increment Counter by one for each frame whose OctetCount is greater than maxFrameSize. |
1.3.6.1.4.1.232.101.1.3.11.2.2.1.9 | n2feTen100SwPortShortEvents | 0 | 0 | Increment Counter by one for each carrier event whose ActivityDuration is greater than ShortEventMinTime and less than ShortEvent… |
1.3.6.1.4.1.232.101.1.3.11.2.2.1.10 | n2feTen100SwPortRunts | 0 | 0 | Increment Counter by one for each carrier event whose ActivityDuration is greater than ShortEventMaxTime and less than RuntMaxTim… |
1.3.6.1.4.1.232.101.1.3.11.2.2.1.11 | n2feTen100SwPortCollisions | 0 | 0 | Increment Counter by one for each carrier event in which the CIPresent(X) variable has the value SQE (a collision condition). |
1.3.6.1.4.1.232.101.1.3.11.2.2.1.12 | n2feTen100SwPortLateEvents | 0 | 0 | Increment Counter by one for each carrier event in which the CollIn(X) variable transitions to the value SQE while the activity d… |
1.3.6.1.4.1.232.101.1.3.11.2.2.1.13 | n2feTen100SwPortVeryLongEvents | 0 | 0 | Increment Counter by one for each time a packet was received by this port that was so long that the repeater was forced to go int… |
1.3.6.1.4.1.232.101.1.3.11.2.2.1.14 | n2feTen100SwPortDataRateMismatches | 0 | 0 | Increment Counter by one for each time a packet was received by this port with the transmission frequency (data rate) detectably… |