This object indicates whether or not the port is getting
excessively long receptions. When the carrier reaches 65535 bit
times, the port is disabled until the carrier is no longer present.
Refer to the IEEE 802.3u specification for further details. This
object is valid for 100Mbps repeaters only. For requests on
10Mbps repeaters, this object returns not-applicable(3).
Parsed from file Compaq-n2fe.mib.txt
Company: compaq
Module: CPQN2FE-MIB
n2feTen100SwPortJabberInfo OBJECT-TYPE SYNTAX INTEGER { jabber-port-enabled(1), jabber-port-disabled(2), not-applicable(3) } ACCESS read-only STATUS mandatory DESCRIPTION "This object indicates whether or not the port is getting excessively long receptions. When the carrier reaches 65535 bit times, the port is disabled until the carrier is no longer present. Refer to the IEEE 802.3u specification for further details. This object is valid for 100Mbps repeaters only. For requests on 10Mbps repeaters, this object returns not-applicable(3)." ::= { n2feTen100SwPortInfoEntry 2 }
Vendor: Compaq
Module: CPQN2FE-MIB (Compaq-n2fe.mib)
Type: TABULAR
Access: read-only
Syntax: INTEGER
Automatically extracted from www.mibdepot.com
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.232.101.1.3.11.2.2.1.1 | n2feTen100SwPortId | 0 | 0 | The port ID of the switch port being queried. |
1.3.6.1.4.1.232.101.1.3.11.2.2.1.3 | n2feTen100SwPortResetStatus | 0 | 0 | This object allows the user to reset the 100Mbps repeater port that is connected to the internal 10/100 switch without affecting… |
1.3.6.1.4.1.232.101.1.3.11.2.2.1.4 | n2feTen100SwPortReadableFrames | 0 | 0 | Increment Counter by one for each frame whose OctetCount is greater than or equal to minFrameSize and less than or equal to maxFr… |
1.3.6.1.4.1.232.101.1.3.11.2.2.1.5 | n2feTen100SwPortReadableOctets | 0 | 0 | Increment Counter by OctetCount for each frame which has been determined to be a readable frame. Note: The approximate minimum t… |
1.3.6.1.4.1.232.101.1.3.11.2.2.1.6 | n2feTen100SwPortFCSErrors | 0 | 0 | Increment Counter by one for each frame with FCSError and without FramingError and whose OctetCount is greater than or equal to m… |
1.3.6.1.4.1.232.101.1.3.11.2.2.1.7 | n2feTen100SwPortAlignmentErrors | 0 | 0 | Increment Counter by one for each frame with FCSError and FramingError and whose octetCount is greater than or equal to minFrameS… |
1.3.6.1.4.1.232.101.1.3.11.2.2.1.8 | n2feTen100SwPortFramesTooLong | 0 | 0 | Increment Counter by one for each frame whose OctetCount is greater than maxFrameSize. |
1.3.6.1.4.1.232.101.1.3.11.2.2.1.9 | n2feTen100SwPortShortEvents | 0 | 0 | Increment Counter by one for each carrier event whose ActivityDuration is greater than ShortEventMinTime and less than ShortEvent… |
1.3.6.1.4.1.232.101.1.3.11.2.2.1.10 | n2feTen100SwPortRunts | 0 | 0 | Increment Counter by one for each carrier event whose ActivityDuration is greater than ShortEventMaxTime and less than RuntMaxTim… |
1.3.6.1.4.1.232.101.1.3.11.2.2.1.11 | n2feTen100SwPortCollisions | 0 | 0 | Increment Counter by one for each carrier event in which the CIPresent(X) variable has the value SQE (a collision condition). |
1.3.6.1.4.1.232.101.1.3.11.2.2.1.12 | n2feTen100SwPortLateEvents | 0 | 0 | Increment Counter by one for each carrier event in which the CollIn(X) variable transitions to the value SQE while the activity d… |
1.3.6.1.4.1.232.101.1.3.11.2.2.1.13 | n2feTen100SwPortVeryLongEvents | 0 | 0 | Increment Counter by one for each time a packet was received by this port that was so long that the repeater was forced to go int… |
1.3.6.1.4.1.232.101.1.3.11.2.2.1.14 | n2feTen100SwPortDataRateMismatches | 0 | 0 | Increment Counter by one for each time a packet was received by this port with the transmission frequency (data rate) detectably… |
1.3.6.1.4.1.232.101.1.3.11.2.2.1.15 | n2feTen100SwPortCodingErrors | 0 | 0 | Increment Counter by one for each time a valid-length packet was received by this port and there was at least one occurrence of … |