This table predefines the link-parameters to be used,
when a link is created. If no entry is contained
in this table for a particular link, it will be setup
with the default values. In any case, the parameters
finally choosen for a link are displayed in the x25LinkTable.
For point-to-multipoint interfaces, the parameters
for the link may be set for all connected partners
(x25LkPrAddr is empty) of for the specific partners
individually (x25LkPrAddr is the MAC-address of the
partner).
Parsed from file mibx25.mib.txt
Company: None
Module: BIANCA-BRICK-X25-MIB
This table predefines the link-parameters to be used,
when a link is created. If no entry is contained
in this table for a particular link, it will be setup
with the default values. In any case, the parameters
finally choosen for a link are displayed in the x25LinkTable.
For point-to-multipoint interfaces, the parameters
for the link may be set for all connected partners
(x25LkPrAddr is empty) of for the specific partners
individually (x25LkPrAddr is the MAC-address of the
partner).
Parsed from file BIANCA-BRICK-X25-MIB.mib
Module: BIANCA-BRICK-X25-MIB
Vendor: BinTec Communications GmbH
Module: BIANCA-BRICK-X25-MIB
[Automatically extracted from oidview.com]
x25LinkPresetTable OBJECT-TYPE SYNTAX SEQUENCE OF X25LinkPresetEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This table predefines the link-parameters to be used, when a link is created. If no entry is contained in this table for a particular link, it will be setup with the default values. In any case, the parameters finally choosen for a link are displayed in the x25LinkTable. For point-to-multipoint interfaces, the parameters for the link may be set for all connected partners (x25LkPrAddr is empty) of for the specific partners individually (x25LkPrAddr is the MAC-address of the partner)." ::= { x25 2 }
x25LinkPresetTable OBJECT-TYPE SYNTAX SEQUENCE OF X25LinkPresetEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This table predefines the link-parameters to be used, when a link is created. If no entry is contained in this table for a particular link, it will be setup with the default values. In any case, the parameters finally choosen for a link are displayed in the x25LinkTable. For point-to-multipoint interfaces, the parameters for the link may be set for all connected partners (x25LkPrAddr is empty) of for the specific partners individually (x25LkPrAddr is the MAC-address of the partner)." ::= { x25 2 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.272.4.6.2.1 | x25LinkPresetEntry | 28 | 28 | Entries in this table are created by defining a new value for the field x25LkPrIfIndex. Entries may be deleted by setting the fie… |
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.272.4.6.1 | x25LinkTable | 1 | 29 | This table contains an entry for each active link. There may be mutiple active links per interface. For point-to- multipoint inte… |
| 1.3.6.1.4.1.272.4.6.3 | x25CallTable | 1 | 22 | This table contains an entry for each active X25-call. Calls always lead from a source-link to a destination-link. An interface i… |
| 1.3.6.1.4.1.272.4.6.4 | x25CallHistoryTable | 1 | 24 | This table provides call information for the last 10 calls after they have been cleared. Active call are not contained in the x25… |
| 1.3.6.1.4.1.272.4.6.5 | x25RouteTable | 1 | 19 | The X.25 Routing Table specifies the target link for different call parameters. For each incoming call the route table will be se… |
| 1.3.6.1.4.1.272.4.6.6 | x25RewriteTable | 1 | 21 | This Table contains entries, that describe different rules of rewriting the call parameters before delivering a call. Which entry… |
| 1.3.6.1.4.1.272.4.6.7 | x25MprTable | 1 | 16 | This table contains an entry for each partner reachable via X.25 for Multiprotocol over X.25 according to RFC 1356. Entries in th… |
| 1.3.6.1.4.1.272.4.6.8 | x25PadProfileTable | 1 | 36 | This Table contains entries for the pad profiles. For PPP connections, pad profiles are assigned to incoming connections via the … |
| 1.3.6.1.4.1.272.4.6.9 | x25ToTcpTable | 1 | 23 | None |
| 1.3.6.1.4.1.272.4.6.10 | x25LocalPadCall | 1 | 1 | This object specifies wether a PAD Call (PID=1) routed to the local X.25 entity (ifIndex=1) should be accepted to allow for a rem… |
| 1.3.6.1.4.1.272.4.6.11 | x25LocalAddr | 1 | 1 | The X.25 address to be used as originating address for outgoing X.25 call from this BRICK. A leading @ indicates extended adressi… |
| 1.3.6.1.4.1.272.4.6.12 | x25Rerouting | 1 | 1 | This object specifies whether a rerouting request should be accepted to establish connection to another server. This is only rele… |
| 1.3.6.1.4.1.272.4.6.13 | x25HistoryMaxEntries | 1 | 1 | Maximum number of x25CallHistory entries in memory. |
| 1.3.6.1.4.1.272.4.6.14 | x25AccountingTemplate | 1 | 1 | Specifies the format of accounting messages sent by the syslog protocol. The format can consist of any order of the following var… |