This Table contains entries for the pad profiles. For PPP
connections, pad profiles are assigned to incoming connections
via the isdnDispatchTable. For outgoing connections, the
profile is assigned by the biboPppTable. Profile 0 is used as
default profile for ppp.
Parsed from file mibx25pad.mib.txt
Company: None
Module: BIANCA-BRICK-X25PAD-MIB
This Table contains entries for the pad profiles. For PPP
connections, pad profiles are assigned to incoming connections
via the isdnDispatchTable. For outgoing connections, the
profile is assigned by the biboPppTable. Profile 0 is used as
default profile for ppp.
Parsed from file BIANCA-BRICK-X25PAD-MIB.mib
Module: BIANCA-BRICK-X25PAD-MIB
Vendor: BinTec Communications GmbH
Module: BIANCA-BRICK-X25PAD-MIB
[Automatically extracted from oidview.com]
x25PadProfileTable OBJECT-TYPE SYNTAX SEQUENCE OF X25PadProfileEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This Table contains entries for the pad profiles. For PPP connections, pad profiles are assigned to incoming connections via the isdnDispatchTable. For outgoing connections, the profile is assigned by the biboPppTable. Profile 0 is used as default profile for ppp." ::= { x25 8 }
x25PadProfileTable OBJECT-TYPE SYNTAX SEQUENCE OF X25PadProfileEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This Table contains entries for the pad profiles. For PPP connections, pad profiles are assigned to incoming connections via the isdnDispatchTable. For outgoing connections, the profile is assigned by the biboPppTable. Profile 0 is used as default profile for ppp." ::= { x25 8 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.272.4.6.8.1 | x25PadProfileEntry | 35 | 35 | Entries can only be created and deleted manually. |
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.272.4.6.1 | x25LinkTable | 1 | 29 | This table contains an entry for each active link. There may be mutiple active links per interface. For point-to- multipoint inte… |
| 1.3.6.1.4.1.272.4.6.2 | x25LinkPresetTable | 1 | 29 | This table predefines the link-parameters to be used, when a link is created. If no entry is contained in this table for a partic… |
| 1.3.6.1.4.1.272.4.6.3 | x25CallTable | 1 | 22 | This table contains an entry for each active X25-call. Calls always lead from a source-link to a destination-link. An interface i… |
| 1.3.6.1.4.1.272.4.6.4 | x25CallHistoryTable | 1 | 24 | This table provides call information for the last 10 calls after they have been cleared. Active call are not contained in the x25… |
| 1.3.6.1.4.1.272.4.6.5 | x25RouteTable | 1 | 19 | The X.25 Routing Table specifies the target link for different call parameters. For each incoming call the route table will be se… |
| 1.3.6.1.4.1.272.4.6.6 | x25RewriteTable | 1 | 21 | This Table contains entries, that describe different rules of rewriting the call parameters before delivering a call. Which entry… |
| 1.3.6.1.4.1.272.4.6.7 | x25MprTable | 1 | 16 | This table contains an entry for each partner reachable via X.25 for Multiprotocol over X.25 according to RFC 1356. Entries in th… |
| 1.3.6.1.4.1.272.4.6.9 | x25ToTcpTable | 1 | 23 | None |
| 1.3.6.1.4.1.272.4.6.10 | x25LocalPadCall | 1 | 1 | This object specifies wether a PAD Call (PID=1) routed to the local X.25 entity (ifIndex=1) should be accepted to allow for a rem… |
| 1.3.6.1.4.1.272.4.6.11 | x25LocalAddr | 1 | 1 | The X.25 address to be used as originating address for outgoing X.25 call from this BRICK. A leading @ indicates extended adressi… |
| 1.3.6.1.4.1.272.4.6.12 | x25Rerouting | 1 | 1 | This object specifies whether a rerouting request should be accepted to establish connection to another server. This is only rele… |
| 1.3.6.1.4.1.272.4.6.13 | x25HistoryMaxEntries | 1 | 1 | Maximum number of x25CallHistory entries in memory. |
| 1.3.6.1.4.1.272.4.6.14 | x25AccountingTemplate | 1 | 1 | Specifies the format of accounting messages sent by the syslog protocol. The format can consist of any order of the following var… |