The value of the parameter nine. This parameter provides for
the automatic insertion by the PAD of padding characters in
the character stream transmitted to the start-stop DTE after
the occurrence of a carriage return character. This allows
for the printing mechanism for the start-stop DTE to perform
the carriage return function correctly. A value between 0
and 255 will indicate the number of padding characters. When
this parameter is 0, there will be no padding except that PAD
service signals will contain a number of padding characters
according to the data rate of the start-stop DTE.
Parsed from file mibx25pad.mib.txt
Company: None
Module: BIANCA-BRICK-X25PAD-MIB
The value of the parameter nine. This parameter provides for
the automatic insertion by the PAD of padding characters in
the character stream transmitted to the start-stop DTE after
the occurrence of a carriage return character. This allows
for the printing mechanism for the start-stop DTE to perform
the carriage return function correctly. A value between 0
and 255 will indicate the number of padding characters. When
this parameter is 0, there will be no padding except that PAD
service signals will contain a number of padding characters
according to the data rate of the start-stop DTE.
Parsed from file BIANCA-BRICK-X25PAD-MIB.mib
Module: BIANCA-BRICK-X25PAD-MIB
Vendor: BinTec Communications GmbH
Module: BIANCA-BRICK-X25PAD-MIB
[Automatically extracted from oidview.com]
x25PadProCRPadding OBJECT-TYPE SYNTAX INTEGER (0..255) ACCESS read-write STATUS mandatory DESCRIPTION "The value of the parameter nine. This parameter provides for the automatic insertion by the PAD of padding characters in the character stream transmitted to the start-stop DTE after the occurrence of a carriage return character. This allows for the printing mechanism for the start-stop DTE to perform the carriage return function correctly. A value between 0 and 255 will indicate the number of padding characters. When this parameter is 0, there will be no padding except that PAD service signals will contain a number of padding characters according to the data rate of the start-stop DTE." ::= { x25PadProfileEntry 12 }
x25PadProCRPadding OBJECT-TYPE SYNTAX INTEGER (0..255) ACCESS read-write STATUS mandatory DESCRIPTION "The value of the parameter nine. This parameter provides for the automatic insertion by the PAD of padding characters in the character stream transmitted to the start-stop DTE after the occurrence of a carriage return character. This allows for the printing mechanism for the start-stop DTE to perform the carriage return function correctly. A value between 0 and 255 will indicate the number of padding characters. When this parameter is 0, there will be no padding except that PAD service signals will contain a number of padding characters according to the data rate of the start-stop DTE." ::= { x25PadProfileEntry 12 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.272.4.6.8.1.1 | x25PadProNumber | 0 | 0 | The unique number of the profile. |
| 1.3.6.1.4.1.272.4.6.8.1.2 | x25PadProState | 0 | 0 | The State of the profile. |
| 1.3.6.1.4.1.272.4.6.8.1.3 | x25PadProAutoCallDstAddr | 0 | 0 | When this object is set to a non-empty string, a call will automatically be established to this PAD address. |
| 1.3.6.1.4.1.272.4.6.8.1.4 | x25PadProEscape | 0 | 0 | The value of the parameter one. This parameter defines a character on its receipt the PAD alternates the state from data-transfer… |
| 1.3.6.1.4.1.272.4.6.8.1.5 | x25PadProEcho | 0 | 0 | The value of the parameter two. This parameter determines whether the echo mode is off or on. The selection of the characters to … |
| 1.3.6.1.4.1.272.4.6.8.1.6 | x25PadProForwardChar | 0 | 0 | The value of the parameter three. This parameter defines a character. On its receipt the PAD forwards the previously received dat… |
| 1.3.6.1.4.1.272.4.6.8.1.7 | x25PadProIdleTimer | 0 | 0 | The value of parameter four. This parameter allows the selection of the duration of an interval between successive characters rec… |
| 1.3.6.1.4.1.272.4.6.8.1.8 | x25PadProDevControl | 0 | 0 | The value of the parameter five. This parameter allows for flow control between the PAD and the start-stop DTE. The PAD indicates… |
| 1.3.6.1.4.1.272.4.6.8.1.9 | x25PadProSigControl | 0 | 0 | The value of the parameter six. This parameter provides the start-stop DTE with the ability to decide whether or not and in what … |
| 1.3.6.1.4.1.272.4.6.8.1.10 | x25PadProBrkControl | 0 | 0 | The value of the parameter seven. This parameter allows the selection of the operation of the PAD after the receipt of a BREAK-si… |
| 1.3.6.1.4.1.272.4.6.8.1.11 | x25PadProDiscard | 0 | 0 | The value of the parameter eight. This parameter provides for a PAD to discard the content of user sequences in packets upon requ… |
| 1.3.6.1.4.1.272.4.6.8.1.13 | x25PadProLineFold | 0 | 0 | The value of the parameter ten. This parameter provides for the automatic insertion by the PAD of appropriate format effectors in… |
| 1.3.6.1.4.1.272.4.6.8.1.14 | x25PadProFlowControl | 0 | 0 | The value of the parameter twelve. It allows for flow control between the start-stop DTE and the PAD. The start-stop DTE indicate… |
| 1.3.6.1.4.1.272.4.6.8.1.15 | x25PadProLFInsert | 0 | 0 | The value of the parameter thirteen. It provides for the automatic insertion by the PAD of a linefeed character in the character … |
| 1.3.6.1.4.1.272.4.6.8.1.16 | x25PadProLFPadding | 0 | 0 | The value of the parameter fourteen. It provides for the automatic insertion by the PAD of padding characters in the character st… |
| 1.3.6.1.4.1.272.4.6.8.1.17 | x25PadProEdit | 0 | 0 | The value of the parameter fifteen. It determines, whether editing of user data in data-transfer state is possible or not. The va… |
| 1.3.6.1.4.1.272.4.6.8.1.18 | x25PadProCharDel | 0 | 0 | The value of the parameter sixteen. This parameter provides for character delete editing capabilities in the data-transfer state … |
| 1.3.6.1.4.1.272.4.6.8.1.19 | x25PadProLineDel | 0 | 0 | The value of the parameter seventeen. This parameter provides for line delete editing capabilities in the data-transfer state for… |
| 1.3.6.1.4.1.272.4.6.8.1.20 | x25PadProLineDisp | 0 | 0 | The value of the parameter eighteen. This parameter provides for line display editing capabilities in the data-transfer state for… |
| 1.3.6.1.4.1.272.4.6.8.1.21 | x25PadProSigEdit | 0 | 0 | The value of the parameter nineteen. It provides the start- stop DTE with the ability to decide whether or not editing PAD servic… |
| 1.3.6.1.4.1.272.4.6.8.1.22 | x25PadProEchoMask | 0 | 0 | The value of the parameter twenty. When ECHO is enabled, it allows selected defined sets of characters received from the start-st… |
| 1.3.6.1.4.1.272.4.6.8.1.23 | x25PadProParity | 0 | 0 | The value of the parameter twenty one. It allows the PAD to check parity in the data stream from the start-stop DTE and/or genera… |
| 1.3.6.1.4.1.272.4.6.8.1.24 | x25PadProPageWait | 0 | 0 | The value of the parameter twenty two. It allows the PAD to suspend transmission of additional characters to the start- stop DTE … |
| 1.3.6.1.4.1.272.4.6.8.1.25 | x25PadProXCharDel | 0 | 0 | The value of parameter one hundered eighteen. This parameter is a repeating of parameter sixteen. |
| 1.3.6.1.4.1.272.4.6.8.1.26 | x25PadProXLineDel | 0 | 0 | The value of parameter one hundered nineteen. This parameter is a repeating of parameter seventeen. |
| 1.3.6.1.4.1.272.4.6.8.1.27 | x25PadProXLineDisp | 0 | 0 | The value of the parameter one hundered twenty. This parameter is a repeating of parameter eighteen. |
| 1.3.6.1.4.1.272.4.6.8.1.28 | x25PadProXForwardChar1 | 0 | 0 | The value of the parameter one hundered twenty one. This parameter allows predefinition of one data forwarding character in addit… |
| 1.3.6.1.4.1.272.4.6.8.1.29 | x25PadProXForwardChar2 | 0 | 0 | The value of the parameter one hundered twenty two. This parameter allows predefinition of one data forwarding character in addit… |
| 1.3.6.1.4.1.272.4.6.8.1.30 | x25PadProXParity | 0 | 0 | The value of the parameter one hundered twenty three. This corresponds to the parameter twenty one, but the meaning of values 1 a… |
| 1.3.6.1.4.1.272.4.6.8.1.31 | x25PadProXDelay | 0 | 0 | The value of the parameter one hundered twenty five. This parameter determines how long data forwarding ist delayed, wenn it sync… |
| 1.3.6.1.4.1.272.4.6.8.1.32 | x25PadProXLFInsert | 0 | 0 | The value of the parameter one hundered twenty six. This is a repeating of parameter thirteen. |
| 1.3.6.1.4.1.272.4.6.8.1.33 | x25PadProIdent | 0 | 0 | PAD Identification String, that is sent to start-stop DTE, when PAD is started. |
| 1.3.6.1.4.1.272.4.6.8.1.34 | x25PadProTermAfterCall | 0 | 0 | Terminate the PAD after X25 Call cleared |
| 1.3.6.1.4.1.272.4.6.8.1.35 | x25PadProIgnoreX29 | 0 | 0 | Ignore all X.29 messages |