The value of the parameter six. This parameter provides the
start-stop DTE with the ability to decide whether or not and
in what format PAD service signals are transmitted. The value
0 means no service signals are transmitted to the start-stop
DTE. Value 1 indicates service signals other than the prompt
PAD service signal are transmitted in the standard format. The
value 4 indicates prompt PAD service signal is transmitted in
the standard format. The value 5 is a combination of value 1
and value 4, i.e. all service signals including prompt are
transmitted in standard format. The transmission of service
signals is controlled by values 0, 1, 4, 5.
Parsed from file mibx25pad.mib.txt
Company: None
Module: BIANCA-BRICK-X25PAD-MIB
The value of the parameter six. This parameter provides the
start-stop DTE with the ability to decide whether or not and
in what format PAD service signals are transmitted. The value
0 means no service signals are transmitted to the start-stop
DTE. Value 1 indicates service signals other than the prompt
PAD service signal are transmitted in the standard format. The
value 4 indicates prompt PAD service signal is transmitted in
the standard format. The value 5 is a combination of value 1
and value 4, i.e. all service signals including prompt are
transmitted in standard format. The transmission of service
signals is controlled by values 0, 1, 4, 5.
Parsed from file BIANCA-BRICK-X25PAD-MIB.mib
Module: BIANCA-BRICK-X25PAD-MIB
Vendor: BinTec Communications GmbH
Module: BIANCA-BRICK-X25PAD-MIB
[Automatically extracted from oidview.com]
x25PadProSigControl OBJECT-TYPE SYNTAX INTEGER (0..7) ACCESS read-write STATUS mandatory DESCRIPTION "The value of the parameter six. This parameter provides the start-stop DTE with the ability to decide whether or not and in what format PAD service signals are transmitted. The value 0 means no service signals are transmitted to the start-stop DTE. Value 1 indicates service signals other than the prompt PAD service signal are transmitted in the standard format. The value 4 indicates prompt PAD service signal is transmitted in the standard format. The value 5 is a combination of value 1 and value 4, i.e. all service signals including prompt are transmitted in standard format. The transmission of service signals is controlled by values 0, 1, 4, 5." ::= { x25PadProfileEntry 9 }
x25PadProSigControl OBJECT-TYPE SYNTAX INTEGER (0..5) ACCESS read-write STATUS mandatory DESCRIPTION "The value of the parameter six. This parameter provides the start-stop DTE with the ability to decide whether or not and in what format PAD service signals are transmitted. The value 0 means no service signals are transmitted to the start-stop DTE. Value 1 indicates service signals other than the prompt PAD service signal are transmitted in the standard format. The value 4 indicates prompt PAD service signal is transmitted in the standard format. The value 5 is a combination of value 1 and value 4, i.e. all service signals including prompt are transmitted in standard format. The transmission of service signals is controlled by values 0, 1, 4, 5." ::= { x25PadProfileEntry 9 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.272.4.6.8.1.1 | x25PadProNumber | 0 | 0 | The unique number of the profile. |
| 1.3.6.1.4.1.272.4.6.8.1.2 | x25PadProState | 0 | 0 | The State of the profile. |
| 1.3.6.1.4.1.272.4.6.8.1.3 | x25PadProAutoCallDstAddr | 0 | 0 | When this object is set to a non-empty string, a call will automatically be established to this PAD address. |
| 1.3.6.1.4.1.272.4.6.8.1.4 | x25PadProEscape | 0 | 0 | The value of the parameter one. This parameter defines a character on its receipt the PAD alternates the state from data-transfer… |
| 1.3.6.1.4.1.272.4.6.8.1.5 | x25PadProEcho | 0 | 0 | The value of the parameter two. This parameter determines whether the echo mode is off or on. The selection of the characters to … |
| 1.3.6.1.4.1.272.4.6.8.1.6 | x25PadProForwardChar | 0 | 0 | The value of the parameter three. This parameter defines a character. On its receipt the PAD forwards the previously received dat… |
| 1.3.6.1.4.1.272.4.6.8.1.7 | x25PadProIdleTimer | 0 | 0 | The value of parameter four. This parameter allows the selection of the duration of an interval between successive characters rec… |
| 1.3.6.1.4.1.272.4.6.8.1.8 | x25PadProDevControl | 0 | 0 | The value of the parameter five. This parameter allows for flow control between the PAD and the start-stop DTE. The PAD indicates… |
| 1.3.6.1.4.1.272.4.6.8.1.10 | x25PadProBrkControl | 0 | 0 | The value of the parameter seven. This parameter allows the selection of the operation of the PAD after the receipt of a BREAK-si… |
| 1.3.6.1.4.1.272.4.6.8.1.11 | x25PadProDiscard | 0 | 0 | The value of the parameter eight. This parameter provides for a PAD to discard the content of user sequences in packets upon requ… |
| 1.3.6.1.4.1.272.4.6.8.1.12 | x25PadProCRPadding | 0 | 0 | The value of the parameter nine. This parameter provides for the automatic insertion by the PAD of padding characters in the char… |
| 1.3.6.1.4.1.272.4.6.8.1.13 | x25PadProLineFold | 0 | 0 | The value of the parameter ten. This parameter provides for the automatic insertion by the PAD of appropriate format effectors in… |
| 1.3.6.1.4.1.272.4.6.8.1.14 | x25PadProFlowControl | 0 | 0 | The value of the parameter twelve. It allows for flow control between the start-stop DTE and the PAD. The start-stop DTE indicate… |
| 1.3.6.1.4.1.272.4.6.8.1.15 | x25PadProLFInsert | 0 | 0 | The value of the parameter thirteen. It provides for the automatic insertion by the PAD of a linefeed character in the character … |
| 1.3.6.1.4.1.272.4.6.8.1.16 | x25PadProLFPadding | 0 | 0 | The value of the parameter fourteen. It provides for the automatic insertion by the PAD of padding characters in the character st… |
| 1.3.6.1.4.1.272.4.6.8.1.17 | x25PadProEdit | 0 | 0 | The value of the parameter fifteen. It determines, whether editing of user data in data-transfer state is possible or not. The va… |
| 1.3.6.1.4.1.272.4.6.8.1.18 | x25PadProCharDel | 0 | 0 | The value of the parameter sixteen. This parameter provides for character delete editing capabilities in the data-transfer state … |
| 1.3.6.1.4.1.272.4.6.8.1.19 | x25PadProLineDel | 0 | 0 | The value of the parameter seventeen. This parameter provides for line delete editing capabilities in the data-transfer state for… |
| 1.3.6.1.4.1.272.4.6.8.1.20 | x25PadProLineDisp | 0 | 0 | The value of the parameter eighteen. This parameter provides for line display editing capabilities in the data-transfer state for… |
| 1.3.6.1.4.1.272.4.6.8.1.21 | x25PadProSigEdit | 0 | 0 | The value of the parameter nineteen. It provides the start- stop DTE with the ability to decide whether or not editing PAD servic… |
| 1.3.6.1.4.1.272.4.6.8.1.22 | x25PadProEchoMask | 0 | 0 | The value of the parameter twenty. When ECHO is enabled, it allows selected defined sets of characters received from the start-st… |
| 1.3.6.1.4.1.272.4.6.8.1.23 | x25PadProParity | 0 | 0 | The value of the parameter twenty one. It allows the PAD to check parity in the data stream from the start-stop DTE and/or genera… |
| 1.3.6.1.4.1.272.4.6.8.1.24 | x25PadProPageWait | 0 | 0 | The value of the parameter twenty two. It allows the PAD to suspend transmission of additional characters to the start- stop DTE … |
| 1.3.6.1.4.1.272.4.6.8.1.25 | x25PadProXCharDel | 0 | 0 | The value of parameter one hundered eighteen. This parameter is a repeating of parameter sixteen. |
| 1.3.6.1.4.1.272.4.6.8.1.26 | x25PadProXLineDel | 0 | 0 | The value of parameter one hundered nineteen. This parameter is a repeating of parameter seventeen. |
| 1.3.6.1.4.1.272.4.6.8.1.27 | x25PadProXLineDisp | 0 | 0 | The value of the parameter one hundered twenty. This parameter is a repeating of parameter eighteen. |
| 1.3.6.1.4.1.272.4.6.8.1.28 | x25PadProXForwardChar1 | 0 | 0 | The value of the parameter one hundered twenty one. This parameter allows predefinition of one data forwarding character in addit… |
| 1.3.6.1.4.1.272.4.6.8.1.29 | x25PadProXForwardChar2 | 0 | 0 | The value of the parameter one hundered twenty two. This parameter allows predefinition of one data forwarding character in addit… |
| 1.3.6.1.4.1.272.4.6.8.1.30 | x25PadProXParity | 0 | 0 | The value of the parameter one hundered twenty three. This corresponds to the parameter twenty one, but the meaning of values 1 a… |
| 1.3.6.1.4.1.272.4.6.8.1.31 | x25PadProXDelay | 0 | 0 | The value of the parameter one hundered twenty five. This parameter determines how long data forwarding ist delayed, wenn it sync… |
| 1.3.6.1.4.1.272.4.6.8.1.32 | x25PadProXLFInsert | 0 | 0 | The value of the parameter one hundered twenty six. This is a repeating of parameter thirteen. |
| 1.3.6.1.4.1.272.4.6.8.1.33 | x25PadProIdent | 0 | 0 | PAD Identification String, that is sent to start-stop DTE, when PAD is started. |
| 1.3.6.1.4.1.272.4.6.8.1.34 | x25PadProTermAfterCall | 0 | 0 | Terminate the PAD after X25 Call cleared |
| 1.3.6.1.4.1.272.4.6.8.1.35 | x25PadProIgnoreX29 | 0 | 0 | Ignore all X.29 messages |