Instructs the device to retrieve images setA or setB
from disk and run them.
Parsed from file cascade.mib.txt
Company: cascade
Module: CASCADE-MIB
Child arc 0 is used to translate between SNMPv1 and SNMPv2 notification parameters as explained in IETF RFC 2576, section 3.
nodeRuningImages OBJECT-TYPE SYNTAX INTEGER { setA (1), setB (2) } ACCESS read-write STATUS mandatory DESCRIPTION "Instructs the device to retrieve images setA or setB from disk and run them." ::= { node 147 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.277.1.3.147.0 | nodeRuningImages | 0 | 0 | None |
To many brothers! Only 100 nearest brothers are shown.
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| ... | ||||
| 1.3.6.1.4.1.277.1.3.97 | nodeExternalClockInterfaceType | 1 | 1 | The interface type of the External Clock references. |
| 1.3.6.1.4.1.277.1.3.98 | nodeTrapMaskMib | 1 | 1 | The suppression mask for MIB II traps. |
| 1.3.6.1.4.1.277.1.3.99 | nodeTrapMaskEnterprise | 1 | 1 | The suppression mask for enterprise traps. |
| 1.3.6.1.4.1.277.1.3.100 | nodeExternalClockOutLBO | 1 | 1 | The line-build-out for the T1 External Clock Output from the switch. Default is 0-133ft. |
| 1.3.6.1.4.1.277.1.3.101 | nodeActiveTimingRefAdmin | 1 | 1 | This variable controls the indication sent to the IOMs as to which of the two clock references is preferred. Normally, it is lef… |
| 1.3.6.1.4.1.277.1.3.102 | nodeTimingManualRestore | 1 | 1 | When this variable is written, it causes the system timing hardware to attempt to revert back to the previously-failed-but-since-… |
| 1.3.6.1.4.1.277.1.3.103 | nodeLanIpMask | 1 | 1 | The inband (Ethernet) interface IP mask. the default is 255.255.255.0 |
| 1.3.6.1.4.1.277.1.3.104 | nodeBulkStatsCollectorAddress | 1 | 1 | The IP Address of the Bulk Statistics Collector to which bulk statistics data is transferred. |
| 1.3.6.1.4.1.277.1.3.105 | nodeBulkStatsTransferState | 1 | 1 | This object defines the state of a Bulk Statistics raw file transfer process to the Bulk Statistics Collector identified by the n… |
| 1.3.6.1.4.1.277.1.3.106 | nodeAuthState | 1 | 1 | Console Login Authentication for this node, enabled or disabled. |
| 1.3.6.1.4.1.277.1.3.107 | nodeAuthDomainID | 1 | 1 | Authentication Domain ID for this node. |
| 1.3.6.1.4.1.277.1.3.108 | nodeAuthFailReason | 1 | 1 | Reason for console login authentication failure. |
| 1.3.6.1.4.1.277.1.3.109 | nodeAuthLoginUser | 1 | 1 | Login user failed to pass console authentication. |
| 1.3.6.1.4.1.277.1.3.110 | nodeBulkAvgTransportBwUsed | 1 | 1 | This object reports the average amount of bandwidth (in bits per second) that has been used to transport ATM Bulk Statistics data… |
| 1.3.6.1.4.1.277.1.3.111 | nodeBulkAvgTransportBwBurst | 1 | 1 | This object reports the average transport bandwidth burst rate (in bits per second) obtained to transport ATM Bulk Statistics dat… |
| 1.3.6.1.4.1.277.1.3.112 | nodeBulkMinTransportBwBurst | 1 | 1 | This object reports the minimum transport bandwidth burst rate (in bits per second) obtained to transport ATM Bulk Statistics dat… |
| 1.3.6.1.4.1.277.1.3.113 | nodeBulkMaxTransportBwBurst | 1 | 1 | This object reports the maximum transport bandwidth burst rate (in bits per second) obtained to transport ATM Bulk Statistics dat… |
| 1.3.6.1.4.1.277.1.3.114 | nodeBulkSwAPCommsFailures | 1 | 1 | The number of times that communication from the switch to the ATM Bulk Statistics Adjunct Processor has failed during the current… |
| 1.3.6.1.4.1.277.1.3.115 | nodePsCStatus | 1 | 1 | The status of the power supply #3. For a detailed explanation for the power supply being either in the down or marginal state, r… |
| 1.3.6.1.4.1.277.1.3.116 | nodePsCDiagCode | 1 | 1 | The failure code of the power supply #3. A non-zero value indicates one or more failures. Refer to the hardware manual for a de… |
| 1.3.6.1.4.1.277.1.3.117 | nodeAdminStatus | 1 | 1 | THIS OID IS OBSOLETE. THIS CAN BE REUSED. The desired setting of the switch type indicating whether the switch has two powe… |
| 1.3.6.1.4.1.277.1.3.118 | nodeOperatingStatus | 1 | 1 | The actual switch type indicating whether the switch has two power supplies (TwoPS) or three (ThreePS). |
| 1.3.6.1.4.1.277.1.3.119 | nodeTrapSeverity | 1 | 1 | This is an OID placeholder for Trap Variables. All Cascade traps will contain this binding for the severity level of the trap. |
| 1.3.6.1.4.1.277.1.3.120 | nodeTrapSequenceNumber | 1 | 1 | This is an OID placeholder for Trap Variables. All Cascade traps will contain this binding for the sequence number of the trap. … |
| 1.3.6.1.4.1.277.1.3.121 | nodeTrapTxRate | 1 | 1 | Defines the number of traps (per second) that the switch is allowed to transmit |
| 1.3.6.1.4.1.277.1.3.122 | nodeTrapMaskSeverity | 1 | 1 | The suppression mask for trap severity levels. See nodeTrapSeverity. |
| 1.3.6.1.4.1.277.1.3.123 | nodeAlarmRelayStatus | 1 | 1 | Control of the external CO alarm relays on the SPA. |
| 1.3.6.1.4.1.277.1.3.124 | nodeTrapsDiscardedMajor | 1 | 1 | The number of Major severity traps that were discarded due to queue full conditions. |
| 1.3.6.1.4.1.277.1.3.125 | nodeTrapsDiscardedMinor | 1 | 1 | The number of Minor severity traps that were discarded due to queue full conditions. |
| 1.3.6.1.4.1.277.1.3.126 | nodeTrapDiscardedNonalarm | 1 | 1 | The number of Nonalarm severity traps that were discarded due to queue full conditions. |
| 1.3.6.1.4.1.277.1.3.127 | nodeNtpExternalPoll | 1 | 1 | The log base2 polling interval at which the active CP/SP shall request a time reference from each external reference time server,… |
| 1.3.6.1.4.1.277.1.3.128 | nodeNtpLocalPoll | 1 | 1 | The log base2 polling interval at which the IOP/IOM cards and redundant CP/SP shall request a time reference from each reference … |
| 1.3.6.1.4.1.277.1.3.129 | nodeNtpPreferredServer | 1 | 1 | The IP Address of the preferred reference time server |
| 1.3.6.1.4.1.277.1.3.130 | nodeNtpSystemStatus | 1 | 1 | The Network Timing Protocol system summary status word Leap Year Indicator 0 no warning 1 last minute has 61 sec 2 last mi… |
| 1.3.6.1.4.1.277.1.3.131 | nodeNtpSystemEventCount | 1 | 1 | System Event Counter - exceptions since last read freezes at 15 |
| 1.3.6.1.4.1.277.1.3.132 | nodeNtpSystemEventCode | 1 | 1 | System Event Code - Last Exception Code Reported |
| 1.3.6.1.4.1.277.1.3.133 | nodeNtpRefTimestampISec | 1 | 1 | nodeNtpReftimestampISec |
| 1.3.6.1.4.1.277.1.3.134 | nodeNtpRefTimeStampFSec | 1 | 1 | nodeNtpReftimeStampFSec |
| 1.3.6.1.4.1.277.1.3.135 | nodeNtpOffset | 1 | 1 | Deviation of last Ntp clock update in msec. |
| 1.3.6.1.4.1.277.1.3.136 | nodeNtpMaxOffset | 1 | 1 | Maximum Deviation between the Ntp clock msec. This value shall be cleared after it is read. |
| 1.3.6.1.4.1.277.1.3.137 | nodeNtpNumberofUpdates | 1 | 1 | Number of time the local ntp timer clock has been updated by the NTP process since startup. |
| 1.3.6.1.4.1.277.1.3.138 | nodeNtpReferenceID | 1 | 1 | This is the IP Address of the current time server being referenced |
| 1.3.6.1.4.1.277.1.3.139 | nodeBulkStatsBaseCollectPeriod | 1 | 1 | Defines the base collection period for Bulk Statistics on the B-STDX 8000/9000 starting with release 4.2. Only the following valu… |
| 1.3.6.1.4.1.277.1.3.140 | nodeLanIdleTimeout | 1 | 1 | The idle timeout interval, in seconds, for the Ethernet interface. If the Ethernet interface receives no valid IP traffic during… |
| 1.3.6.1.4.1.277.1.3.141 | nodeRelayClear | 1 | 1 | Clearing of alarm relays on the SPA. |
| 1.3.6.1.4.1.277.1.3.142 | nodeSecondaryIpAddr | 1 | 1 | Alternate address that can be used in place of nodeIPAddr when placing virtual circuits. Used when gracefully transitioning IP ne… |
| 1.3.6.1.4.1.277.1.3.143 | nodeNtpReferenceServer1 | 1 | 1 | The IP Address of the first reference time server |
| 1.3.6.1.4.1.277.1.3.144 | nodeNtpReferenceServer2 | 1 | 1 | The IP Address of the second reference time server |
| 1.3.6.1.4.1.277.1.3.145 | nodeNtpReferenceServer3 | 1 | 1 | The IP Address of the third reference time server |
| 1.3.6.1.4.1.277.1.3.146 | nodeStoredImages | 1 | 1 | Instructs the device to store the images as setA or setB to disk. |
| 1.3.6.1.4.1.277.1.3.148 | nodeScheduleFastLoad | 1 | 1 | To schedule software loading to happen after the specified time elapses. Software loading is the process for a switch to reload a… |
| 1.3.6.1.4.1.277.1.3.149 | nodeFastLoadStatus | 1 | 1 | The status of software loading. The value is a display string containing a status code followed by a short descriptive message. 0… |
| 1.3.6.1.4.1.277.1.3.150 | nodePwrExternalStatus | 1 | 1 | Garnet external power supply status. |
| 1.3.6.1.4.1.277.1.3.151 | nodePwrBusAStatus | 1 | 1 | Garnet 48 volt power bus A status. |
| 1.3.6.1.4.1.277.1.3.152 | nodePwrBusBStatus | 1 | 1 | Garnet 48 volt power bus B status. |
| 1.3.6.1.4.1.277.1.3.153 | nodePwrFanAStatus | 1 | 1 | Garnet 24 volt fan power supply from Timing Module A. |
| 1.3.6.1.4.1.277.1.3.154 | nodePwrFanBStatus | 1 | 1 | Garnet 24 volt fan power supply from Timing Module B. |
| 1.3.6.1.4.1.277.1.3.155 | nodeModuleTransferRequest | 1 | 1 | This object is used to initiate module download from NMS to the switch. A management station can initiate a file transfer by sett… |
| 1.3.6.1.4.1.277.1.3.156 | nodeModuleTransferStatus | 1 | 1 | The status of the module transfer. |
| 1.3.6.1.4.1.277.1.3.157 | nodeLogSrvDefIpAddr | 1 | 1 | Default IP address of the log collection station. |
| 1.3.6.1.4.1.277.1.3.158 | nodeLogDefDstDir | 1 | 1 | Default destination directory for the log files. This name must be terminated with a slash '/'. |
| 1.3.6.1.4.1.277.1.3.159 | nodeLogDefFlushTime | 1 | 1 | nodeLogDefFlushtime |
| 1.3.6.1.4.1.277.1.3.160 | nodeLogDefFlushThresh | 1 | 1 | nodeLogDefFlushthresh |
| 1.3.6.1.4.1.277.1.3.161 | nodeLogImpLevel | 1 | 1 | Importance level common to all client applications. |
| 1.3.6.1.4.1.277.1.3.162 | nodePsDcPowerAStatus | 1 | 1 | The status of the N+1 DC 48V power supply A. |
| 1.3.6.1.4.1.277.1.3.163 | nodePsDcPowerBStatus | 1 | 1 | The status of the N+1 DC 48V power supply B. |
| 1.3.6.1.4.1.277.1.3.164 | nodePTSHoldoverState | 1 | 1 | The state of the PTS holdover. |
| 1.3.6.1.4.1.277.1.3.165 | nodeOspfArea1BackCompat | 1 | 1 | This variable determines if the router can talk to pre-IP Navigator switches. |
| 1.3.6.1.4.1.277.1.3.166 | nodeMptCIR | 1 | 1 | This CIR allocated to the MPT rooted at this node. |
| 1.3.6.1.4.1.277.1.3.167 | nodeSmdsCIR | 1 | 1 | This CIR allocated to the SMDS Virtual Paths originating at this node. |
| ... | ||||