Number of instances that destination individual address not found.
Parsed from file cascade.mib.txt
Company: None
Module: CASCADE-MIB
Number of instances that destination individual address not found.
Parsed from file CASCADE-MIB.mib
Module: CASCADE-MIB
Vendor: Cascade Communications Corp.
Module: CASCADE-MIB
[Automatically extracted from oidview.com]
lportSmdsCntDstIaNotFounds OBJECT-TYPE SYNTAX Counter ACCESS read-write STATUS mandatory DESCRIPTION "Number of instances that destination individual address not found." ::= { lportEntry 136 }
lportSmdsCntDstIaNotFounds OBJECT-TYPE SYNTAX Counter ACCESS read-write STATUS mandatory DESCRIPTION "Number of instances that destination individual address not found." ::= { lportEntry 136 }
To many brothers! Only 100 nearest brothers are shown.
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| ... | ||||
| 1.3.6.1.4.1.277.1.5.1.1.86 | lportTrkKeepAliveTimer | 0 | 0 | Send a keep-alive packet after this many seconds. These packets are sent on trunk links only. The range is 0 thru 15, with zer… |
| 1.3.6.1.4.1.277.1.5.1.1.87 | lportTrkKeepAliveErrorThreshold | 0 | 0 | Declare the interface down after this many keep-alive packets in a row are missed. The default is five. |
| 1.3.6.1.4.1.277.1.5.1.1.88 | lportIgCutThruStatus | 0 | 0 | Enable ingress cut-thru on this user lport. Default is disabled. |
| 1.3.6.1.4.1.277.1.5.1.1.89 | lportEgCutThruStatus | 0 | 0 | Enable egress cut-thru on this user lport. Default is disabled. |
| 1.3.6.1.4.1.277.1.5.1.1.90 | lportEgCutThruThresh | 0 | 0 | Egress cut thru threshold - start transmitting a frame on a user port after this many segments have arrived. |
| 1.3.6.1.4.1.277.1.5.1.1.91 | lportFrameRelayTrkEnable | 0 | 0 | Allow Frame Relay Trunks on the user link. |
| 1.3.6.1.4.1.277.1.5.1.1.92 | lportSmdsSsiIf | 0 | 0 | The interface number of the SSI which this DXI/SNI is multiplexed to. |
| 1.3.6.1.4.1.277.1.5.1.1.93 | lportSmdsSsiSlot | 0 | 0 | The slot of the SSI which this DXI/SNI is multiplexed to. |
| 1.3.6.1.4.1.277.1.5.1.1.94 | lportSmdsScrnId | 0 | 0 | The ID of address screen for this interface. |
| 1.3.6.1.4.1.277.1.5.1.1.95 | lportSmdsIaScrnOp | 0 | 0 | Individual address screen operation. |
| 1.3.6.1.4.1.277.1.5.1.1.96 | lportSmdsGaScrnOp | 0 | 0 | Group address screen operation. |
| 1.3.6.1.4.1.277.1.5.1.1.97 | lportSmdsIaScrnMap | 0 | 0 | The individual address screen member bit map. For set request, the first byte is the operation : 1 for deleting, 2 for adding. Th… |
| 1.3.6.1.4.1.277.1.5.1.1.98 | lportSmdsGaScrnMap | 0 | 0 | The group address screen member bit map. For set request, the first byte is the operation : 1 for deleting, 2 for adding. The fol… |
| 1.3.6.1.4.1.277.1.5.1.1.99 | lportSmdsTrkAddr | 0 | 0 | SMDS address. For SSI feeder port, this address is the local address of all SMDS optimum paths associated with this SSI feeder po… |
| 1.3.6.1.4.1.277.1.5.1.1.100 | lportSmdsCrc | 0 | 0 | CRC which CPE generates. |
| 1.3.6.1.4.1.277.1.5.1.1.101 | lportSmdsCpePoll | 0 | 0 | Whether CPE supports heart beat poll or not. |
| 1.3.6.1.4.1.277.1.5.1.1.102 | lportSmdsPduCheck | 0 | 0 | turn on/off the detailed SIP3 PDU error checking. |
| 1.3.6.1.4.1.277.1.5.1.1.103 | lportSmdsCntOutFrDxi2HbPolls | 0 | 0 | Number of DXI2 heart beat poll frames transmitted. |
| 1.3.6.1.4.1.277.1.5.1.1.104 | lportSmdsCntOutByteDxi2HbPolls | 0 | 0 | Total number of octets in DXI2 heart beat poll frames transmitted. |
| 1.3.6.1.4.1.277.1.5.1.1.105 | lportSmdsCntInFrDxi2HbPolls | 0 | 0 | Number of DXI2 heart beat poll frames received. |
| 1.3.6.1.4.1.277.1.5.1.1.106 | lportSmdsCntInByteDxi2HbPolls | 0 | 0 | Total number of octets in DXI2 heart beat poll frames received. |
| 1.3.6.1.4.1.277.1.5.1.1.107 | lportSmdsCntOutFrSip3s | 0 | 0 | Number of SIP3 frames transmitted. |
| 1.3.6.1.4.1.277.1.5.1.1.108 | lportSmdsCntOutByteSip3s | 0 | 0 | Total number of octets in SIP3 frames transmitted. |
| 1.3.6.1.4.1.277.1.5.1.1.109 | lportSmdsCntInFrSip3s | 0 | 0 | Number of SIP3 frames received. |
| 1.3.6.1.4.1.277.1.5.1.1.110 | lportSmdsCntInByteSip3s | 0 | 0 | Total number of octets in SIP3 frames received. |
| 1.3.6.1.4.1.277.1.5.1.1.111 | lportSmdsCntDxi2LinkIdInvalids | 0 | 0 | Number of instances that DXI2 link ID is invalid. |
| 1.3.6.1.4.1.277.1.5.1.1.112 | lportSmdsCntDxi2StationIdInvalids | 0 | 0 | Number of instances that DXI2 station ID is invalid. |
| 1.3.6.1.4.1.277.1.5.1.1.113 | lportSmdsCntDxi2CrInvalids | 0 | 0 | Number of instances that DXI2 command/response field is invalid. |
| 1.3.6.1.4.1.277.1.5.1.1.114 | lportSmdsCntDxi2AeInvalids | 0 | 0 | Number of instances that DXI2 address extension field is invalid. |
| 1.3.6.1.4.1.277.1.5.1.1.115 | lportSmdsCntDxi2CtrlInvalids | 0 | 0 | Number of instances that DXI2 control field is invalid. |
| 1.3.6.1.4.1.277.1.5.1.1.116 | lportSmdsCntDxi2FrameSizeErrors | 0 | 0 | Number of instances there is a DXI2 frame size error. |
| 1.3.6.1.4.1.277.1.5.1.1.117 | lportSmdsCntSip3RsvdInvalids | 0 | 0 | Number of instances that SIP3 reserved field in header is invalid. |
| 1.3.6.1.4.1.277.1.5.1.1.118 | lportSmdsCntSip3BetagMismatchs | 0 | 0 | Number of instances that SIP3 BE tag is not matched. |
| 1.3.6.1.4.1.277.1.5.1.1.119 | lportSmdsCntSip3BasizeIncorrects | 0 | 0 | Number of instances that SIP3 BA size is incorrect. |
| 1.3.6.1.4.1.277.1.5.1.1.120 | lportSmdsCntSip3BasizeInvalids | 0 | 0 | Number of instances that SIP3 BA size is invalid. |
| 1.3.6.1.4.1.277.1.5.1.1.121 | lportSmdsCntSip3DaTypeInvalids | 0 | 0 | Number of instances that SIP3 destination address type is invalid. |
| 1.3.6.1.4.1.277.1.5.1.1.122 | lportSmdsCntSip3DaInvalids | 0 | 0 | Number of instances that SIP3 destination address is invalid. |
| 1.3.6.1.4.1.277.1.5.1.1.123 | lportSmdsCntSip3SaTypeInvalids | 0 | 0 | Number of instances that SIP3 source address type is invalid. |
| 1.3.6.1.4.1.277.1.5.1.1.124 | lportSmdsCntSip3SaInvalids | 0 | 0 | Number of instances that SIP3 source address is invalid. |
| 1.3.6.1.4.1.277.1.5.1.1.125 | lportSmdsCntSip3BasizeMismatchs | 0 | 0 | Number of instances that SIP3 BA sizes in the header and trailer are not matched. |
| 1.3.6.1.4.1.277.1.5.1.1.126 | lportSmdsCntSip3HeLenInvalids | 0 | 0 | Number of instances that SIP3 header extension length is invalid. |
| 1.3.6.1.4.1.277.1.5.1.1.127 | lportSmdsCntSip3HeVersionInvalids | 0 | 0 | Number of instances that SIP3 header extension version is invalid. |
| 1.3.6.1.4.1.277.1.5.1.1.128 | lportSmdsCntSip3HeCarrierInvalids | 0 | 0 | Number of instances that SIP3 header extension carrier is invalid. |
| 1.3.6.1.4.1.277.1.5.1.1.129 | lportSmdsCntSip3Crc32Errors | 0 | 0 | Number of SIP3 CRC errors. |
| 1.3.6.1.4.1.277.1.5.1.1.130 | lportSmdsCntSip3TRsvdInvalids | 0 | 0 | Number of instances that SIP3 reserved field in trailer is invalid. |
| 1.3.6.1.4.1.277.1.5.1.1.131 | lportSmdsCntSaNotFounds | 0 | 0 | Number of instances that source address not found. |
| 1.3.6.1.4.1.277.1.5.1.1.132 | lportSmdsCntSaValidationFails | 0 | 0 | Number of instances that source address validation failed. |
| 1.3.6.1.4.1.277.1.5.1.1.133 | lportSmdsCntSaDaOnSamePorts | 0 | 0 | Number of instances that source address and destination addresses are on the same port. |
| 1.3.6.1.4.1.277.1.5.1.1.134 | lportSmdsCntDaSsiMismacths | 0 | 0 | Obsolete. |
| 1.3.6.1.4.1.277.1.5.1.1.135 | lportSmdsCntSsiProvisionErrors | 0 | 0 | Obsolete. |
| 1.3.6.1.4.1.277.1.5.1.1.137 | lportSmdsCntDstGaNotFounds | 0 | 0 | Number of instances that destination group address not found. |
| 1.3.6.1.4.1.277.1.5.1.1.138 | lportSmdsCntSrcIaScrnFails | 0 | 0 | Number of instances that source individual address screening failed. |
| 1.3.6.1.4.1.277.1.5.1.1.139 | lportSmdsCntDstIaScrnFails | 0 | 0 | Number of instances that destination individual address screening failed. |
| 1.3.6.1.4.1.277.1.5.1.1.140 | lportSmdsCntDstGaScrnFails | 0 | 0 | Number of instances that destination group address screening failed. |
| 1.3.6.1.4.1.277.1.5.1.1.141 | lportSmdsTotalDiscards | 0 | 0 | total number of discards. |
| 1.3.6.1.4.1.277.1.5.1.1.142 | lportSmdsSsiNode | 0 | 0 | The Node of the SSI which this DXI/SNI is multiplexed to. |
| 1.3.6.1.4.1.277.1.5.1.1.143 | lportBilling | 0 | 0 | This object defines the ability to enable and disable billing on this logical port (for SMDS this must be a DXI). When the value… |
| 1.3.6.1.4.1.277.1.5.1.1.144 | lportSmdsReserved144, lportSmdsCntDstGaSrcIsCascade | 0 | 0 | reserved! ignore! |
| 1.3.6.1.4.1.277.1.5.1.1.145 | lportLinkStatus | 0 | 0 | Link protocol status. The Link protocol may be frame relay LMI, DXI heart beat poll, PPP LCP, etc, depends on the lport type. |
| 1.3.6.1.4.1.277.1.5.1.1.146 | lportLMIDelay | 0 | 0 | The number of seconds 1-9 to buffer (or initiate) a FR LMI async update (or ATM OAM alarms) to allow filtering of LMI async even… |
| 1.3.6.1.4.1.277.1.5.1.1.147 | lportCRC | 0 | 0 | Lport CRC selection: 0 - 16 bit CRC 1 - 32 bit CRC |
| 1.3.6.1.4.1.277.1.5.1.1.148 | lportSmdsMulticastGa | 0 | 0 | The Multicast Group Address is the smds broadcast address which is used to get smds address from its IP address. |
| 1.3.6.1.4.1.277.1.5.1.1.149 | lportSmdsMulticastIpAddr | 0 | 0 | This IP address is this logical port's IP address. |
| 1.3.6.1.4.1.277.1.5.1.1.150 | lportAtmVPI | 0 | 0 | VPI value in the ATM cell header: ATM DXI with HSSI IOP VPI (4 lsb bit) range: 0 - 15 ATM UNI DS3/E3 IOP VPI (4 lsb bit) range… |
| 1.3.6.1.4.1.277.1.5.1.1.151 | lportAtmVCI | 0 | 0 | VCI value in the ATM cell header: ATM DXI with HSSI IOP VCI (6 lsb bit) range: 0 - 63 ATM UNI DS3/E3 IOP VCI (8 lsb bit) range… |
| 1.3.6.1.4.1.277.1.5.1.1.152 | lportPeakCellRateindex | 0 | 0 | Peak cell rate queue index |
| 1.3.6.1.4.1.277.1.5.1.1.153 | lportSustCellRate | 0 | 0 | Sustainable cell rate in cell/second |
| 1.3.6.1.4.1.277.1.5.1.1.154 | lportBurstTolerance | 0 | 0 | Burst Tolerance in multiple of 32 cells |
| 1.3.6.1.4.1.277.1.5.1.1.155 | lportBuTrkOnFailure | 0 | 0 | Enables or disables trunk backup due to link down. |
| 1.3.6.1.4.1.277.1.5.1.1.156 | lportTrkFailureThrsh | 0 | 0 | The number of seconds a primary trunk must remain down for trunk backup to be initiated. |
| 1.3.6.1.4.1.277.1.5.1.1.157 | lportTrkRestThrsh | 0 | 0 | The number of seconds a primary trunk must remain up for trunk backup to be terminated |
| 1.3.6.1.4.1.277.1.5.1.1.158 | lportBuTrkRetryInt | 0 | 0 | The number of seconds between backup trunk call setup retries. |
| 1.3.6.1.4.1.277.1.5.1.1.159 | lportBuTrkRetryNum | 0 | 0 | The number of backup trunk call setup tries per call setup cycle. |
| 1.3.6.1.4.1.277.1.5.1.1.160 | lportBuTrkCycleInt | 0 | 0 | The number of seconds between backup trunk call setup cycles. |
| 1.3.6.1.4.1.277.1.5.1.1.161 | lportTrkManualBu | 0 | 0 | Initiate or terminate manual backup for a primary trunk. none neither initiate or terminate initCmd initiate operator commanded … |
| 1.3.6.1.4.1.277.1.5.1.1.162 | lportPrimTrk | 0 | 0 | Indicates the primary trunk lportIfIndex for which a backup trunk is serving as a backup. This value is also used to determine tr… |
| 1.3.6.1.4.1.277.1.5.1.1.163 | lportInitCallSetup | 0 | 0 | TRUE if node must initiate backup trunk call setup for this primary trunk. Otherwise FALSE. |
| 1.3.6.1.4.1.277.1.5.1.1.164 | lportBuFailReason | 0 | 0 | Indicates the reason for the failure to perform trunk backup. |
| 1.3.6.1.4.1.277.1.5.1.1.165 | lportQ922Enable | 0 | 0 | Set 1 to enable Q.922 on this port. Q.922 must be enabled if the port is used for SVC. |
| 1.3.6.1.4.1.277.1.5.1.1.166 | lportQ922State | 0 | 0 | Q.922 state. This object only makes sense when Q.922 is enabled. |
| 1.3.6.1.4.1.277.1.5.1.1.167 | lportTrkPduRevision | 0 | 0 | The Trunk PDU Revision number being used over this trunk. |
| 1.3.6.1.4.1.277.1.5.1.1.168 | lportPVCMgrPduRevision | 0 | 0 | The PVC Manager PDU Revision number being used over this trunk. |
| 1.3.6.1.4.1.277.1.5.1.1.169 | lportDS0LoopStatus | 0 | 0 | Indicates the DS0 Lpbk Status of the Lport. |
| 1.3.6.1.4.1.277.1.5.1.1.170 | lportISDNDuration | 0 | 0 | The number of seconds that the ISDN call has been established. |
| 1.3.6.1.4.1.277.1.5.1.1.171 | lportISDNSourceAddr | 0 | 0 | The E.164 address of the source of this ISDN connection. |
| 1.3.6.1.4.1.277.1.5.1.1.172 | lportISDNDestAddr | 0 | 0 | The E.164 address of the destination of this ISDN connection. |
| 1.3.6.1.4.1.277.1.5.1.1.173 | lportISDNIpAddr | 0 | 0 | The Ip Address of the client connected to this B-Channel |
| 1.3.6.1.4.1.277.1.5.1.1.174 | lportISDNCallRejCause | 0 | 0 | The cause of the call rejection - inability to authenticate or pool is busy. |
| 1.3.6.1.4.1.277.1.5.1.1.175 | lportLastInvalidDLCI | 0 | 0 | This item pertains to user frame relay lports only. The frame relay header of the received frame contains a dlci, which uniquely… |
| 1.3.6.1.4.1.277.1.5.1.1.176 | lportTrkProtState | 0 | 0 | The current operational state of the link trunk protocol on this link. |
| 1.3.6.1.4.1.277.1.5.1.1.177 | lportTrkTrafficMix | 0 | 0 | The types of traffic allowed over a Cascade trunk. |
| 1.3.6.1.4.1.277.1.5.1.1.178 | lportNumVC | 0 | 0 | The number of VCs going to or through a particular port. |
| 1.3.6.1.4.1.277.1.5.1.1.179 | lportTrkAdminCost | 0 | 0 | The administrative cost of the trunk. Used when routing circuits. Trunks with lower costs are preferred. Value ranges from 1 to 6… |
| 1.3.6.1.4.1.277.1.5.1.1.180 | lportPrivateNet | 0 | 0 | If non-zero, indicates the private network that the lport belongs to. If 0, the lport is publicly shared. |
| 1.3.6.1.4.1.277.1.5.1.1.181 | lportTrkStaticDelay | 0 | 0 | The measured round-trip delay of the trunk, in milliseconds. Measured when the trunk last became operational. |
| 1.3.6.1.4.1.277.1.5.1.1.182 | lportTrkDynamicDelay | 0 | 0 | The recently measured round-tip delay of the trunk. May vary from lportTrkStaticDelay due to congestion, or reprovisioning of the… |
| 1.3.6.1.4.1.277.1.5.1.1.183 | lportAtmDataRateQoS1 | 0 | 0 | An estimate of the logical port's data rate in bits per second reserved for QoS class 1. |
| 1.3.6.1.4.1.277.1.5.1.1.184 | lportAtmDataRateQoS2 | 0 | 0 | An estimate of the logical port's data rate in bits per second reserved for QoS class 2. |
| 1.3.6.1.4.1.277.1.5.1.1.185 | lportAtmDataRateQoS3 | 0 | 0 | An estimate of the logical port's data rate in bits per second reserved for QoS class 3. |
| 1.3.6.1.4.1.277.1.5.1.1.186 | lportAtmDataRateQoS4 | 0 | 0 | An estimate of the logical port's data rate in bits per second reserved for QoS class 4. |
| ... | ||||