The logical port entry contains objects relevant to a
logical port.
Parsed from file cascade.mib.txt
Company: None
Module: CASCADE-MIB
The logical port entry contains objects relevant to a
logical port.
Parsed from file CASCADE-MIB.mib
Module: CASCADE-MIB
Vendor: Cascade Communications Corp.
Module: CASCADE-MIB
[Automatically extracted from oidview.com]
lportEntry OBJECT-TYPE SYNTAX LportEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "The logical port entry contains objects relevant to a logical port." INDEX { lportIfIndex } ::= { lportTable 1 }
lportEntry OBJECT-TYPE SYNTAX LportEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "The logical port entry contains objects relevant to a logical port." INDEX { lportIfIndex } ::= { lportTable 1 }
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.277.1.5.1.1.1 | lportIfIndex | 0 | 0 | The ifIndex value of the corresponding ifEntry. |
1.3.6.1.4.1.277.1.5.1.1.2 | lportSlotId | 0 | 0 | The slot number of the board the port is on. |
1.3.6.1.4.1.277.1.5.1.1.3 | lportPportId | 0 | 0 | The physical port number of the interface on the board. |
1.3.6.1.4.1.277.1.5.1.1.4 | lportId | 0 | 0 | The logical port number of the interface on the physical port. A logical port can be uniquely identified in a Cascade network as… |
1.3.6.1.4.1.277.1.5.1.1.5 | lportLink | 0 | 0 | The equipment type of the peer to which the logical port is connected. |
1.3.6.1.4.1.277.1.5.1.1.6 | lportProtocol | 0 | 0 | The data link protocol running on the logical port. |
1.3.6.1.4.1.277.1.5.1.1.7 | lportSignal | 0 | 0 | The user-network signalling capability for SVC and DLCMI of the logical port. Note that this only applies to fr protocol port. |
1.3.6.1.4.1.277.1.5.1.1.8 | lportFt1Ds0s | 0 | 0 | The bit mask indicating the DS0s for the fractional T1/E1 logical port which must be a subset of the corresponding pportDs1Ds0s. … |
1.3.6.1.4.1.277.1.5.1.1.9 | lportGlobalDlci | 0 | 0 | The global DLCI correspondent to the interface if the DLCI is globally significant in the network. Note that this object is read-… |
1.3.6.1.4.1.277.1.5.1.1.10 | lportDlcmiStd | 0 | 0 | This variable states which Data Link Connection Management scheme is active (and by implication, what DLCI it uses) on the Fram… |
1.3.6.1.4.1.277.1.5.1.1.11 | lportDlciAddrFmt | 0 | 0 | This variable states which address format is in use on the Frame Relay interface. |
1.3.6.1.4.1.277.1.5.1.1.12 | lportDlciAddrLen | 0 | 0 | This variable states which address length in octets. In the case of Q922 format, the length indicates the entire length of the ad… |
1.3.6.1.4.1.277.1.5.1.1.13 | lportMaxFramesize | 0 | 0 | The maximum frame size supported on the interface. Currently it's not used. |
1.3.6.1.4.1.277.1.5.1.1.14 | lportDceVerifTimer | 0 | 0 | lportDceVeriftimer |
1.3.6.1.4.1.277.1.5.1.1.15 | lportDceErrorThresh | 0 | 0 | The error threshold on the DCE interface. If the port is configured as a DXI/SNI, then this MIB object defines the heartbeat poll… |
1.3.6.1.4.1.277.1.5.1.1.16 | lportDceEventCount | 0 | 0 | The monitored events count on the DCE interface. |
1.3.6.1.4.1.277.1.5.1.1.17 | lportDteErrorThresh | 0 | 0 | The error threshold on the DTE interface. |
1.3.6.1.4.1.277.1.5.1.1.18 | lportDteEventCount | 0 | 0 | The monitored events count on the DTE interface. |
1.3.6.1.4.1.277.1.5.1.1.19 | lportDtePollTimer | 0 | 0 | The link status polling timer (secs) on the DTE interface. |
1.3.6.1.4.1.277.1.5.1.1.20 | lportDteFullCounter | 0 | 0 | The full status polling counter on the DTE interface. |
1.3.6.1.4.1.277.1.5.1.1.21 | lportDteMulticast | 0 | 0 | The multicast capability of the interface. |
1.3.6.1.4.1.277.1.5.1.1.22 | lportTrkRnode | 0 | 0 | Node at the other end of the trunk. This object is read-write only during lport creation, and read-only thereafter. |
1.3.6.1.4.1.277.1.5.1.1.23 | lportTrkRlport | 0 | 0 | Logical port (IfIndex) at the other end of the trunk. This |
1.3.6.1.4.1.277.1.5.1.1.24 | lportCongestState | 0 | 0 | Congestion State for the logical port. |
1.3.6.1.4.1.277.1.5.1.1.25 | lportQP1Len | 0 | 0 | Priority-1 queue length (number of packets) in xmit buffer. |
1.3.6.1.4.1.277.1.5.1.1.26 | lportQP2Len | 0 | 0 | Priority-2 queue length (number of packets) in xmit buffer. |
1.3.6.1.4.1.277.1.5.1.1.27 | lportQP3Len | 0 | 0 | Priority-3 queue length (number of packets) in xmit buffer. |
1.3.6.1.4.1.277.1.5.1.1.28 | lportQP4Len | 0 | 0 | Priority-4 queue length (number of packets) in xmit buffer. |
1.3.6.1.4.1.277.1.5.1.1.29 | lportErrTime | 0 | 0 | The value of sysUpTime at which the last error was detected. |
1.3.6.1.4.1.277.1.5.1.1.30 | lportErrType | 0 | 0 | The type of error that was last seen on this interface. |
1.3.6.1.4.1.277.1.5.1.1.31 | lportErrData | 0 | 0 | An octet string containing as much of the error packet as possible. As a minimum, it must contain the Q.922 Address or as much a… |
1.3.6.1.4.1.277.1.5.1.1.32 | lportDiagTestId | 0 | 0 | Identification for the diagnostics tests to be run. |
1.3.6.1.4.1.277.1.5.1.1.33 | lportDiagTestRuns | 0 | 0 | Number of passes of the diagnostics tests to be run. The default value is 1. |
1.3.6.1.4.1.277.1.5.1.1.34 | lportDataRate | 0 | 0 | An estimate of the logical port's data rate in bits per second. |
1.3.6.1.4.1.277.1.5.1.1.35 | lportTrkStatus | 0 | 0 | The current state of the trunk. The btdefined state only applies to backup trunks. |
1.3.6.1.4.1.277.1.5.1.1.36 | lportSevCongests | 0 | 0 | The cumulative number of times that the lport's congestion state has changed from mildly-congested to severely-congested since th… |
1.3.6.1.4.1.277.1.5.1.1.37 | lportAbsCongests | 0 | 0 | The cumulative number of times that the lport's congestion state has changed from severely-congested to absolutely- congested sin… |
1.3.6.1.4.1.277.1.5.1.1.38 | lportTrkOverhead | 0 | 0 | An estimate of the overhead (headers and internal control messages) in trunking user data in terms of a percentage of the configu… |
1.3.6.1.4.1.277.1.5.1.1.39 | lportTrkUtil | 0 | 0 | An estimate of the real utilization of the trunk bandwidth in terms of a percentage of the configured trunk bandwidth. |
1.3.6.1.4.1.277.1.5.1.1.40 | lportVAvailbw | 0 | 0 | Currently available virtual trunk bandwidth. |
1.3.6.1.4.1.277.1.5.1.1.41 | lportTrkLastTimeChange | 0 | 0 | The sysUpTime value when the trunk was last changed to the current status. |
1.3.6.1.4.1.277.1.5.1.1.42 | lportCongestRate | 0 | 0 | The rate (%) of entering severely or absolutely congested states in the last one minute interval. |
1.3.6.1.4.1.277.1.5.1.1.43 | lportCongestRateThresh | 0 | 0 | The alert threshold (%) for the CongestRate; trap will be sent when exceeded. |
1.3.6.1.4.1.277.1.5.1.1.44 | lportDiagState | 0 | 0 | The current state of the diagnostic on this logical port. |
1.3.6.1.4.1.277.1.5.1.1.45 | lportDiagOptionStr | 0 | 0 | Optional parameters to the diagnostic. |
1.3.6.1.4.1.277.1.5.1.1.46 | lportDiagPassCount | 0 | 0 | Number of successful diagnostic passes. |
1.3.6.1.4.1.277.1.5.1.1.47 | lportDiagFailCount | 0 | 0 | Number of failed diagnostic passes. |
1.3.6.1.4.1.277.1.5.1.1.48 | lportDiagResultStr | 0 | 0 | Description of last diagnostic failure. |
1.3.6.1.4.1.277.1.5.1.1.49 | lportDs0BitStuff | 0 | 0 | Is bit stuffing enabled on this lport? |
1.3.6.1.4.1.277.1.5.1.1.50 | lportErrorThreshold | 0 | 0 | The per minute error threshold before a link error trap is sent. |
1.3.6.1.4.1.277.1.5.1.1.51 | lportUnsyncBandwidth | 0 | 0 | The accumulated allocated/deallocated bandwidth which has not been propagated by OSPF yet. |
1.3.6.1.4.1.277.1.5.1.1.52 | lportDTEInStatusFrames | 0 | 0 | The number of LMI STATUS frames received from the DCE since the last system reset. The count includes link integrity verification… |
1.3.6.1.4.1.277.1.5.1.1.53 | lportDTEInFullStatusFrames | 0 | 0 | The number of LMI Full STATUS frames received from the DTE since the last system reset. |
1.3.6.1.4.1.277.1.5.1.1.54 | lportDTEInAsyncStatusFrames | 0 | 0 | The number of asynchronous LMI Status frames received from the DTE since the last system reset. For LMI Rev 1, these are Update S… |
1.3.6.1.4.1.277.1.5.1.1.55 | lportDTEInErrorFrames | 0 | 0 | The number of LMI frames received containing protocol errors. |
1.3.6.1.4.1.277.1.5.1.1.56 | lportDTEOutPollFrames | 0 | 0 | The number of LMI Status Enquiry frames transmitted since the last system reset. |
1.3.6.1.4.1.277.1.5.1.1.57 | lportDTEPollErrorCounts | 0 | 0 | The number of DTE in-channel signaling link reliability errors (i.e. LMI Status Enquiry frames that were not responded to, seque… |
1.3.6.1.4.1.277.1.5.1.1.58 | lportDTEFailCounts | 0 | 0 | The number of times since the last system reset LMI has declared the DTE side of the link down due to excessive errors. |
1.3.6.1.4.1.277.1.5.1.1.59 | lportDTEFailReason | 0 | 0 | The LMI failure reason. If the rate of LMI detected errors exceeds the threshold, this contains the cause of the most recent erro… |
1.3.6.1.4.1.277.1.5.1.1.60 | lportDTEOperStatus | 0 | 0 | The operational status of the DTE side of LMI on this link. |
1.3.6.1.4.1.277.1.5.1.1.61 | lportDCEInPollFrames | 0 | 0 | The number of LMI poll frames received from the DTE since the last system reset. |
1.3.6.1.4.1.277.1.5.1.1.62 | lportDCEInErrorFrames | 0 | 0 | The number of LMI frames received containing protocol errors. |
1.3.6.1.4.1.277.1.5.1.1.63 | lportDCEOutStatusFrames | 0 | 0 | The number of LMI STATUS frames transmitted since the last system reset. The count includes link integrity verification frames on… |
1.3.6.1.4.1.277.1.5.1.1.64 | lportDCEOutFullStatusFrames | 0 | 0 | The number of LMI Full STATUS frames transmitted since the last system reset. |
1.3.6.1.4.1.277.1.5.1.1.65 | lportDCEOutAsyncStatusFrames | 0 | 0 | The number of asynchronous LMI Status frames transmitted since the last system reset. For LMI Rev 1, these are Update STATUS fram… |
1.3.6.1.4.1.277.1.5.1.1.66 | lportDCEPollErrorCounts | 0 | 0 | The number of DCE in-channel signaling link reliability errors (i.e. timeouts waiting for LMI Status Enquiry frames, sequence nu… |
1.3.6.1.4.1.277.1.5.1.1.67 | lportDCEFailCounts | 0 | 0 | The number of times since the last system reset LMI has declared the DCE side of the link down due to excessive errors. |
1.3.6.1.4.1.277.1.5.1.1.68 | lportDCEFailReason | 0 | 0 | The LMI failure reason. If the rate of LMI detected errors exceeds the threshold, this contains the cause of the most recent erro… |
1.3.6.1.4.1.277.1.5.1.1.69 | lportDCEOperStatus | 0 | 0 | The operational status of the DCE side of LMI on this link. |
1.3.6.1.4.1.277.1.5.1.1.70 | lportDCEOperDlcmiStd | 0 | 0 | This variable states which Data Link Connection Management scheme is actually being run on this link. This is used for DCE links … |
1.3.6.1.4.1.277.1.5.1.1.71 | lportLMIInErrorFrames | 0 | 0 | The number of total frames received with an error. For NNI links this is the sum of lportDTEInErrorFrames and lportDCEInErrorFram… |
1.3.6.1.4.1.277.1.5.1.1.72 | lportDCEnN4 | 0 | 0 | This variable specifies the maximum number of LMI Status Enquiry frames that can be received from a DTE within time interval lpor… |
1.3.6.1.4.1.277.1.5.1.1.73 | lportDCEnT3 | 0 | 0 | This variable specifies the time interval (secs) used to determine if lportDCEnN4 an excess number (lportDCEnN4) of Status Enqui… |
1.3.6.1.4.1.277.1.5.1.1.74 | lportXmitLatencyThreshold | 0 | 0 | Outbound frames are allowed on the transmit commit queue when the commit queue falls below this threshold (in microseconds). |
1.3.6.1.4.1.277.1.5.1.1.75 | lportXmitRefillPriority0Percentage | 0 | 0 | Percentage of time the transmit queue is refilled in priority order 0, 1, 2, 3. |
1.3.6.1.4.1.277.1.5.1.1.76 | lportXmitRefillPriority1Percentage | 0 | 0 | Percentage of time the transmit queue is refilled in priority order 1, 2, 3, 0. |
1.3.6.1.4.1.277.1.5.1.1.77 | lportXmitRefillPriority2Percentage | 0 | 0 | Percentage of time the transmit queue is refilled in priority order 2, 3, 0, 1. |
1.3.6.1.4.1.277.1.5.1.1.78 | lportXmitRefillPriority3Percentage | 0 | 0 | Percentage of time the transmit queue is refilled in priority order 3, 0, 1, 2. |
1.3.6.1.4.1.277.1.5.1.1.79 | lportXmitDiscardLow, lportAbsoluteThreshold | 0 | 0 | Priority holding queue low water discard threshold. Discarding stops when holding queue hits this level. |
1.3.6.1.4.1.277.1.5.1.1.80 | lportSevereThreshold | 0 | 0 | Severe congestion level. Outbound red and amber packets are discarded when the transmit queue hits this threshold. |
1.3.6.1.4.1.277.1.5.1.1.81 | lportMildThreshold | 0 | 0 | Mild congestion level. Outbound red packets are discarded when the transmit queue hits this threshold. |
1.3.6.1.4.1.277.1.5.1.1.82 | lportAtmUPCEnable | 0 | 0 | Enable ATM UPC Function. |
1.3.6.1.4.1.277.1.5.1.1.83 | lportAtmUniType | 0 | 0 | The type of UNI for this ATM lport. |
1.3.6.1.4.1.277.1.5.1.1.84 | lportConnectionType | 0 | 0 | The type of connection at this lport. |
1.3.6.1.4.1.277.1.5.1.1.85 | lportAtmCellType | 0 | 0 | atm cell header with uni-format or nni-format with no GFC. |
1.3.6.1.4.1.277.1.5.1.1.86 | lportTrkKeepAliveTimer | 0 | 0 | Send a keep-alive packet after this many seconds. These packets are sent on trunk links only. The range is 0 thru 15, with zer… |
1.3.6.1.4.1.277.1.5.1.1.87 | lportTrkKeepAliveErrorThreshold | 0 | 0 | Declare the interface down after this many keep-alive packets in a row are missed. The default is five. |
1.3.6.1.4.1.277.1.5.1.1.88 | lportIgCutThruStatus | 0 | 0 | Enable ingress cut-thru on this user lport. Default is disabled. |
1.3.6.1.4.1.277.1.5.1.1.89 | lportEgCutThruStatus | 0 | 0 | Enable egress cut-thru on this user lport. Default is disabled. |
1.3.6.1.4.1.277.1.5.1.1.90 | lportEgCutThruThresh | 0 | 0 | Egress cut thru threshold - start transmitting a frame on a user port after this many segments have arrived. |
1.3.6.1.4.1.277.1.5.1.1.91 | lportFrameRelayTrkEnable | 0 | 0 | Allow Frame Relay Trunks on the user link. |
1.3.6.1.4.1.277.1.5.1.1.92 | lportSmdsSsiIf | 0 | 0 | The interface number of the SSI which this DXI/SNI is multiplexed to. |
1.3.6.1.4.1.277.1.5.1.1.93 | lportSmdsSsiSlot | 0 | 0 | The slot of the SSI which this DXI/SNI is multiplexed to. |
1.3.6.1.4.1.277.1.5.1.1.94 | lportSmdsScrnId | 0 | 0 | The ID of address screen for this interface. |
1.3.6.1.4.1.277.1.5.1.1.95 | lportSmdsIaScrnOp | 0 | 0 | Individual address screen operation. |
1.3.6.1.4.1.277.1.5.1.1.96 | lportSmdsGaScrnOp | 0 | 0 | Group address screen operation. |
1.3.6.1.4.1.277.1.5.1.1.97 | lportSmdsIaScrnMap | 0 | 0 | The individual address screen member bit map. For set request, the first byte is the operation : 1 for deleting, 2 for adding. Th… |
1.3.6.1.4.1.277.1.5.1.1.98 | lportSmdsGaScrnMap | 0 | 0 | The group address screen member bit map. For set request, the first byte is the operation : 1 for deleting, 2 for adding. The fol… |
1.3.6.1.4.1.277.1.5.1.1.99 | lportSmdsTrkAddr | 0 | 0 | SMDS address. For SSI feeder port, this address is the local address of all SMDS optimum paths associated with this SSI feeder po… |
1.3.6.1.4.1.277.1.5.1.1.100 | lportSmdsCrc | 0 | 0 | CRC which CPE generates. |
1.3.6.1.4.1.277.1.5.1.1.101 | lportSmdsCpePoll | 0 | 0 | Whether CPE supports heart beat poll or not. |
1.3.6.1.4.1.277.1.5.1.1.102 | lportSmdsPduCheck | 0 | 0 | turn on/off the detailed SIP3 PDU error checking. |
1.3.6.1.4.1.277.1.5.1.1.103 | lportSmdsCntOutFrDxi2HbPolls | 0 | 0 | Number of DXI2 heart beat poll frames transmitted. |
1.3.6.1.4.1.277.1.5.1.1.104 | lportSmdsCntOutByteDxi2HbPolls | 0 | 0 | Total number of octets in DXI2 heart beat poll frames transmitted. |
1.3.6.1.4.1.277.1.5.1.1.105 | lportSmdsCntInFrDxi2HbPolls | 0 | 0 | Number of DXI2 heart beat poll frames received. |
1.3.6.1.4.1.277.1.5.1.1.106 | lportSmdsCntInByteDxi2HbPolls | 0 | 0 | Total number of octets in DXI2 heart beat poll frames received. |
1.3.6.1.4.1.277.1.5.1.1.107 | lportSmdsCntOutFrSip3s | 0 | 0 | Number of SIP3 frames transmitted. |
1.3.6.1.4.1.277.1.5.1.1.108 | lportSmdsCntOutByteSip3s | 0 | 0 | Total number of octets in SIP3 frames transmitted. |
1.3.6.1.4.1.277.1.5.1.1.109 | lportSmdsCntInFrSip3s | 0 | 0 | Number of SIP3 frames received. |
1.3.6.1.4.1.277.1.5.1.1.110 | lportSmdsCntInByteSip3s | 0 | 0 | Total number of octets in SIP3 frames received. |
1.3.6.1.4.1.277.1.5.1.1.111 | lportSmdsCntDxi2LinkIdInvalids | 0 | 0 | Number of instances that DXI2 link ID is invalid. |
1.3.6.1.4.1.277.1.5.1.1.112 | lportSmdsCntDxi2StationIdInvalids | 0 | 0 | Number of instances that DXI2 station ID is invalid. |
1.3.6.1.4.1.277.1.5.1.1.113 | lportSmdsCntDxi2CrInvalids | 0 | 0 | Number of instances that DXI2 command/response field is invalid. |
1.3.6.1.4.1.277.1.5.1.1.114 | lportSmdsCntDxi2AeInvalids | 0 | 0 | Number of instances that DXI2 address extension field is invalid. |
1.3.6.1.4.1.277.1.5.1.1.115 | lportSmdsCntDxi2CtrlInvalids | 0 | 0 | Number of instances that DXI2 control field is invalid. |
1.3.6.1.4.1.277.1.5.1.1.116 | lportSmdsCntDxi2FrameSizeErrors | 0 | 0 | Number of instances there is a DXI2 frame size error. |
1.3.6.1.4.1.277.1.5.1.1.117 | lportSmdsCntSip3RsvdInvalids | 0 | 0 | Number of instances that SIP3 reserved field in header is invalid. |
1.3.6.1.4.1.277.1.5.1.1.118 | lportSmdsCntSip3BetagMismatchs | 0 | 0 | Number of instances that SIP3 BE tag is not matched. |
1.3.6.1.4.1.277.1.5.1.1.119 | lportSmdsCntSip3BasizeIncorrects | 0 | 0 | Number of instances that SIP3 BA size is incorrect. |
1.3.6.1.4.1.277.1.5.1.1.120 | lportSmdsCntSip3BasizeInvalids | 0 | 0 | Number of instances that SIP3 BA size is invalid. |
1.3.6.1.4.1.277.1.5.1.1.121 | lportSmdsCntSip3DaTypeInvalids | 0 | 0 | Number of instances that SIP3 destination address type is invalid. |
1.3.6.1.4.1.277.1.5.1.1.122 | lportSmdsCntSip3DaInvalids | 0 | 0 | Number of instances that SIP3 destination address is invalid. |
1.3.6.1.4.1.277.1.5.1.1.123 | lportSmdsCntSip3SaTypeInvalids | 0 | 0 | Number of instances that SIP3 source address type is invalid. |
1.3.6.1.4.1.277.1.5.1.1.124 | lportSmdsCntSip3SaInvalids | 0 | 0 | Number of instances that SIP3 source address is invalid. |
1.3.6.1.4.1.277.1.5.1.1.125 | lportSmdsCntSip3BasizeMismatchs | 0 | 0 | Number of instances that SIP3 BA sizes in the header and trailer are not matched. |
1.3.6.1.4.1.277.1.5.1.1.126 | lportSmdsCntSip3HeLenInvalids | 0 | 0 | Number of instances that SIP3 header extension length is invalid. |
1.3.6.1.4.1.277.1.5.1.1.127 | lportSmdsCntSip3HeVersionInvalids | 0 | 0 | Number of instances that SIP3 header extension version is invalid. |
1.3.6.1.4.1.277.1.5.1.1.128 | lportSmdsCntSip3HeCarrierInvalids | 0 | 0 | Number of instances that SIP3 header extension carrier is invalid. |
1.3.6.1.4.1.277.1.5.1.1.129 | lportSmdsCntSip3Crc32Errors | 0 | 0 | Number of SIP3 CRC errors. |
1.3.6.1.4.1.277.1.5.1.1.130 | lportSmdsCntSip3TRsvdInvalids | 0 | 0 | Number of instances that SIP3 reserved field in trailer is invalid. |
1.3.6.1.4.1.277.1.5.1.1.131 | lportSmdsCntSaNotFounds | 0 | 0 | Number of instances that source address not found. |
1.3.6.1.4.1.277.1.5.1.1.132 | lportSmdsCntSaValidationFails | 0 | 0 | Number of instances that source address validation failed. |
1.3.6.1.4.1.277.1.5.1.1.133 | lportSmdsCntSaDaOnSamePorts | 0 | 0 | Number of instances that source address and destination addresses are on the same port. |
1.3.6.1.4.1.277.1.5.1.1.134 | lportSmdsCntDaSsiMismacths | 0 | 0 | Obsolete. |
1.3.6.1.4.1.277.1.5.1.1.135 | lportSmdsCntSsiProvisionErrors | 0 | 0 | Obsolete. |
1.3.6.1.4.1.277.1.5.1.1.136 | lportSmdsCntDstIaNotFounds | 0 | 0 | Number of instances that destination individual address not found. |
1.3.6.1.4.1.277.1.5.1.1.137 | lportSmdsCntDstGaNotFounds | 0 | 0 | Number of instances that destination group address not found. |
1.3.6.1.4.1.277.1.5.1.1.138 | lportSmdsCntSrcIaScrnFails | 0 | 0 | Number of instances that source individual address screening failed. |
1.3.6.1.4.1.277.1.5.1.1.139 | lportSmdsCntDstIaScrnFails | 0 | 0 | Number of instances that destination individual address screening failed. |
1.3.6.1.4.1.277.1.5.1.1.140 | lportSmdsCntDstGaScrnFails | 0 | 0 | Number of instances that destination group address screening failed. |
1.3.6.1.4.1.277.1.5.1.1.141 | lportSmdsTotalDiscards | 0 | 0 | total number of discards. |
1.3.6.1.4.1.277.1.5.1.1.142 | lportSmdsSsiNode | 0 | 0 | The Node of the SSI which this DXI/SNI is multiplexed to. |
1.3.6.1.4.1.277.1.5.1.1.143 | lportBilling | 0 | 0 | This object defines the ability to enable and disable billing on this logical port (for SMDS this must be a DXI). When the value… |
1.3.6.1.4.1.277.1.5.1.1.144 | lportSmdsReserved144, lportSmdsCntDstGaSrcIsCascade | 0 | 0 | reserved! ignore! |
1.3.6.1.4.1.277.1.5.1.1.145 | lportLinkStatus | 0 | 0 | Link protocol status. The Link protocol may be frame relay LMI, DXI heart beat poll, PPP LCP, etc, depends on the lport type. |
1.3.6.1.4.1.277.1.5.1.1.146 | lportLMIDelay | 0 | 0 | The number of seconds 1-9 to buffer (or initiate) a FR LMI async update (or ATM OAM alarms) to allow filtering of LMI async even… |
1.3.6.1.4.1.277.1.5.1.1.147 | lportCRC | 0 | 0 | Lport CRC selection: 0 - 16 bit CRC 1 - 32 bit CRC |
1.3.6.1.4.1.277.1.5.1.1.148 | lportSmdsMulticastGa | 0 | 0 | The Multicast Group Address is the smds broadcast address which is used to get smds address from its IP address. |
1.3.6.1.4.1.277.1.5.1.1.149 | lportSmdsMulticastIpAddr | 0 | 0 | This IP address is this logical port's IP address. |
1.3.6.1.4.1.277.1.5.1.1.150 | lportAtmVPI | 0 | 0 | VPI value in the ATM cell header: ATM DXI with HSSI IOP VPI (4 lsb bit) range: 0 - 15 ATM UNI DS3/E3 IOP VPI (4 lsb bit) range… |
1.3.6.1.4.1.277.1.5.1.1.151 | lportAtmVCI | 0 | 0 | VCI value in the ATM cell header: ATM DXI with HSSI IOP VCI (6 lsb bit) range: 0 - 63 ATM UNI DS3/E3 IOP VCI (8 lsb bit) range… |
1.3.6.1.4.1.277.1.5.1.1.152 | lportPeakCellRateindex | 0 | 0 | Peak cell rate queue index |
1.3.6.1.4.1.277.1.5.1.1.153 | lportSustCellRate | 0 | 0 | Sustainable cell rate in cell/second |
1.3.6.1.4.1.277.1.5.1.1.154 | lportBurstTolerance | 0 | 0 | Burst Tolerance in multiple of 32 cells |
1.3.6.1.4.1.277.1.5.1.1.155 | lportBuTrkOnFailure | 0 | 0 | Enables or disables trunk backup due to link down. |
1.3.6.1.4.1.277.1.5.1.1.156 | lportTrkFailureThrsh | 0 | 0 | The number of seconds a primary trunk must remain down for trunk backup to be initiated. |
1.3.6.1.4.1.277.1.5.1.1.157 | lportTrkRestThrsh | 0 | 0 | The number of seconds a primary trunk must remain up for trunk backup to be terminated |
1.3.6.1.4.1.277.1.5.1.1.158 | lportBuTrkRetryInt | 0 | 0 | The number of seconds between backup trunk call setup retries. |
1.3.6.1.4.1.277.1.5.1.1.159 | lportBuTrkRetryNum | 0 | 0 | The number of backup trunk call setup tries per call setup cycle. |
1.3.6.1.4.1.277.1.5.1.1.160 | lportBuTrkCycleInt | 0 | 0 | The number of seconds between backup trunk call setup cycles. |
1.3.6.1.4.1.277.1.5.1.1.161 | lportTrkManualBu | 0 | 0 | Initiate or terminate manual backup for a primary trunk. none neither initiate or terminate initCmd initiate operator commanded … |
1.3.6.1.4.1.277.1.5.1.1.162 | lportPrimTrk | 0 | 0 | Indicates the primary trunk lportIfIndex for which a backup trunk is serving as a backup. This value is also used to determine tr… |
1.3.6.1.4.1.277.1.5.1.1.163 | lportInitCallSetup | 0 | 0 | TRUE if node must initiate backup trunk call setup for this primary trunk. Otherwise FALSE. |
1.3.6.1.4.1.277.1.5.1.1.164 | lportBuFailReason | 0 | 0 | Indicates the reason for the failure to perform trunk backup. |
1.3.6.1.4.1.277.1.5.1.1.165 | lportQ922Enable | 0 | 0 | Set 1 to enable Q.922 on this port. Q.922 must be enabled if the port is used for SVC. |
1.3.6.1.4.1.277.1.5.1.1.166 | lportQ922State | 0 | 0 | Q.922 state. This object only makes sense when Q.922 is enabled. |
1.3.6.1.4.1.277.1.5.1.1.167 | lportTrkPduRevision | 0 | 0 | The Trunk PDU Revision number being used over this trunk. |
1.3.6.1.4.1.277.1.5.1.1.168 | lportPVCMgrPduRevision | 0 | 0 | The PVC Manager PDU Revision number being used over this trunk. |
1.3.6.1.4.1.277.1.5.1.1.169 | lportDS0LoopStatus | 0 | 0 | Indicates the DS0 Lpbk Status of the Lport. |
1.3.6.1.4.1.277.1.5.1.1.170 | lportISDNDuration | 0 | 0 | The number of seconds that the ISDN call has been established. |
1.3.6.1.4.1.277.1.5.1.1.171 | lportISDNSourceAddr | 0 | 0 | The E.164 address of the source of this ISDN connection. |
1.3.6.1.4.1.277.1.5.1.1.172 | lportISDNDestAddr | 0 | 0 | The E.164 address of the destination of this ISDN connection. |
1.3.6.1.4.1.277.1.5.1.1.173 | lportISDNIpAddr | 0 | 0 | The Ip Address of the client connected to this B-Channel |
1.3.6.1.4.1.277.1.5.1.1.174 | lportISDNCallRejCause | 0 | 0 | The cause of the call rejection - inability to authenticate or pool is busy. |
1.3.6.1.4.1.277.1.5.1.1.175 | lportLastInvalidDLCI | 0 | 0 | This item pertains to user frame relay lports only. The frame relay header of the received frame contains a dlci, which uniquely… |
1.3.6.1.4.1.277.1.5.1.1.176 | lportTrkProtState | 0 | 0 | The current operational state of the link trunk protocol on this link. |
1.3.6.1.4.1.277.1.5.1.1.177 | lportTrkTrafficMix | 0 | 0 | The types of traffic allowed over a Cascade trunk. |
1.3.6.1.4.1.277.1.5.1.1.178 | lportNumVC | 0 | 0 | The number of VCs going to or through a particular port. |
1.3.6.1.4.1.277.1.5.1.1.179 | lportTrkAdminCost | 0 | 0 | The administrative cost of the trunk. Used when routing circuits. Trunks with lower costs are preferred. Value ranges from 1 to 6… |
1.3.6.1.4.1.277.1.5.1.1.180 | lportPrivateNet | 0 | 0 | If non-zero, indicates the private network that the lport belongs to. If 0, the lport is publicly shared. |
1.3.6.1.4.1.277.1.5.1.1.181 | lportTrkStaticDelay | 0 | 0 | The measured round-trip delay of the trunk, in milliseconds. Measured when the trunk last became operational. |
1.3.6.1.4.1.277.1.5.1.1.182 | lportTrkDynamicDelay | 0 | 0 | The recently measured round-tip delay of the trunk. May vary from lportTrkStaticDelay due to congestion, or reprovisioning of the… |
1.3.6.1.4.1.277.1.5.1.1.183 | lportAtmDataRateQoS1 | 0 | 0 | An estimate of the logical port's data rate in bits per second reserved for QoS class 1. |
1.3.6.1.4.1.277.1.5.1.1.184 | lportAtmDataRateQoS2 | 0 | 0 | An estimate of the logical port's data rate in bits per second reserved for QoS class 2. |
1.3.6.1.4.1.277.1.5.1.1.185 | lportAtmDataRateQoS3 | 0 | 0 | An estimate of the logical port's data rate in bits per second reserved for QoS class 3. |
1.3.6.1.4.1.277.1.5.1.1.186 | lportAtmDataRateQoS4 | 0 | 0 | An estimate of the logical port's data rate in bits per second reserved for QoS class 4. |
1.3.6.1.4.1.277.1.5.1.1.187 | lportOutVAvailbwQoS1 | 0 | 0 | Current outgoing available virtual bandwidth reserved for QoS class 1. |
1.3.6.1.4.1.277.1.5.1.1.188 | lportOutVAvailbwQoS2 | 0 | 0 | Current outgoing available virtual bandwidth reserved for QoS class 2. |
1.3.6.1.4.1.277.1.5.1.1.189 | lportOutVAvailbwQoS3 | 0 | 0 | Current outgoing available virtual bandwidth reserved for QoS class 3. |
1.3.6.1.4.1.277.1.5.1.1.190 | lportOutVAvailbwQoS4 | 0 | 0 | Current outgoing available virtual bandwidth reserved for QoS class 4. |
1.3.6.1.4.1.277.1.5.1.1.191 | lportInVAvailbwQoS1 | 0 | 0 | Current incoming available virtual bandwidth reserved for QoS class 1. |
1.3.6.1.4.1.277.1.5.1.1.192 | lportInVAvailbwQoS2 | 0 | 0 | Current incoming available virtual bandwidth reserved for QoS class 2. |
1.3.6.1.4.1.277.1.5.1.1.193 | lportInVAvailbwQoS3 | 0 | 0 | Current incoming available virtual bandwidth reserved for QoS class 3. |
1.3.6.1.4.1.277.1.5.1.1.194 | lportInVAvailbwQoS4 | 0 | 0 | Current incoming available virtual bandwidth reserved for QoS class 4. |
1.3.6.1.4.1.277.1.5.1.1.195 | lportOutAllocbwQoS1 | 0 | 0 | Current outgoing allocated bandwidth for QoS Class 1. |
1.3.6.1.4.1.277.1.5.1.1.196 | lportOutAllocbwQoS2 | 0 | 0 | Current outgoing allocated bandwidth for QoS Class 2. |
1.3.6.1.4.1.277.1.5.1.1.197 | lportOutAllocbwQoS3 | 0 | 0 | Current outgoing allocated bandwidth for QoS Class 3. |
1.3.6.1.4.1.277.1.5.1.1.198 | lportOutAllocbwQoS4 | 0 | 0 | Current outgoing allocated bandwidth for QoS Class 4. |
1.3.6.1.4.1.277.1.5.1.1.199 | lportInAllocbwQoS1 | 0 | 0 | Current incoming allocated bandwidth for QoS Class 1. |
1.3.6.1.4.1.277.1.5.1.1.200 | lportInAllocbwQoS2 | 0 | 0 | Current incoming allocated bandwidth for QoS Class 2. |
1.3.6.1.4.1.277.1.5.1.1.201 | lportInAllocbwQoS3 | 0 | 0 | Current incoming allocated bandwidth for QoS Class 3. |
1.3.6.1.4.1.277.1.5.1.1.202 | lportInAllocbwQoS4 | 0 | 0 | Current incoming allocated bandwidth for QoS Class 4. |
1.3.6.1.4.1.277.1.5.1.1.203 | lportDynamicQoSbw | 0 | 0 | Bitmap defining which QoS Classes should have bandwidth allocated dynamically from lportDataRate instead of reserving a percentag… |
1.3.6.1.4.1.277.1.5.1.1.204 | lportSVCRetryTimer, lportSvcHoldDownTimer | 0 | 0 | The duration in seconds (1..255) the network is allowed to re-establish a SVC after network failure before clearing the SVC. A va… |
1.3.6.1.4.1.277.1.5.1.1.205 | lportAtmNetworkType, lportAtmConnectionType | 0 | 0 | Whether this lport is supporting a private or public network. |
1.3.6.1.4.1.277.1.5.1.1.206 | lportAtmRouteMetricQoS1 | 0 | 0 | Routing metric associated with QoS Class 1. |
1.3.6.1.4.1.277.1.5.1.1.207 | lportAtmRouteMetricQoS2 | 0 | 0 | Routing metric associated with QoS Class 2. |
1.3.6.1.4.1.277.1.5.1.1.208 | lportAtmRouteMetricQoS3 | 0 | 0 | Routing metric associated with QoS Class 3. |
1.3.6.1.4.1.277.1.5.1.1.209 | lportAtmRouteMetricQoS4 | 0 | 0 | Routing metric associated with QoS Class 4. |
1.3.6.1.4.1.277.1.5.1.1.210 | lportIlmiPollTimeout | 0 | 0 | The duration in seconds (1..255) the ILMI poll is generated by the network-side UME. A value of 0 set to default polling period o… |
1.3.6.1.4.1.277.1.5.1.1.211 | lportAtmProtocol | 0 | 0 | UNI protocol version for this port. |
1.3.6.1.4.1.277.1.5.1.1.212 | lportIlmiAdminStatus | 0 | 0 | Administrative state for ILMI function on this port. |
1.3.6.1.4.1.277.1.5.1.1.213 | lportIlmiOperStatus | 0 | 0 | Operational status for ILMI function on this port. |
1.3.6.1.4.1.277.1.5.1.1.214 | lportIlmiPollRetry | 0 | 0 | The number of retries of ILMI poll request will be generated when network-side UME detects loss of ILMI connectivity. A value of… |
1.3.6.1.4.1.277.1.5.1.1.215 | lportAtmVpiBits | 0 | 0 | Number of bits of VPI supported. |
1.3.6.1.4.1.277.1.5.1.1.216 | lportAtmVciBits | 0 | 0 | Number of bits of VCI supported. |
1.3.6.1.4.1.277.1.5.1.1.217 | lportAtmOamAlarmEnable | 0 | 0 | If disabled then OAM alarms are not generated for circuits that are down on this lport. |
1.3.6.1.4.1.277.1.5.1.1.218 | lportInVAvailbw | 0 | 0 | Currently available Incoming virtual bandwidth. |
1.3.6.1.4.1.277.1.5.1.1.219 | lportbwUNIPolicy | 0 | 0 | The network policy towards requiring sufficient bandwidth at the UNI interface prior to allowing a circuit to be established. |
1.3.6.1.4.1.277.1.5.1.1.220 | lportStarvation | 0 | 0 | The CE/CBR card detected a starvation condition on this lport for an extended period |
1.3.6.1.4.1.277.1.5.1.1.221 | lportRecOverflow | 0 | 0 | The CE/CBR card detected a receive overflow condition on this lport for an extended period. |
1.3.6.1.4.1.277.1.5.1.1.222 | lportLossOfCellSequence | 0 | 0 | The CE/CBR card detected a LOS condition on this lport for an extended period. |
1.3.6.1.4.1.277.1.5.1.1.223 | lportLossOfStructurePointer | 0 | 0 | The structured CBR card detected a loss of structure pointer condition on this lport for an extended period. |
1.3.6.1.4.1.277.1.5.1.1.224 | lportCbrInsDummyCells | 0 | 0 | The number of dummy cells inserted due to cell loss on a constant bit rate (AAL1) interface. |
1.3.6.1.4.1.277.1.5.1.1.225 | lportRecFifoUnderflowCnt | 0 | 0 | The number of receive FIFO underflows since the last reset. If this condition persists, a lportCBRLineDataError trap is issued in… |
1.3.6.1.4.1.277.1.5.1.1.226 | lportRecFifoOverflowCnt | 0 | 0 | The number of receive FIFO overflows since the last reset. If this condition persists, a lportCBRLineDataError trap is issued ind… |
1.3.6.1.4.1.277.1.5.1.1.227 | lportCbrLossOfStructurePointerCnt | 0 | 0 | The object counts how often the structured CBR card detected a loss of the structure pointer since the last reset. |
1.3.6.1.4.1.277.1.5.1.1.228 | lportCbrLossOfCellSequenceCnt | 0 | 0 | The number of loss of cell sequence since the last reset. |
1.3.6.1.4.1.277.1.5.1.1.229 | lportShaperId | 0 | 0 | The shaper to be used for this ATM trunk interworking with frame relay: 1-port ATM-IWU STM-1/STS-3c card Values: 1..16 |
1.3.6.1.4.1.277.1.5.1.1.230 | lportIlmiPrefixScreenMode, lportDteIlmiPrefixScreenMode | 0 | 0 | The type of screening to apply against dynamic prefixes received from the peer ILMI entity at this DTE port. |
1.3.6.1.4.1.277.1.5.1.1.231 | lportSmdsPduViolTca | 0 | 0 | This object defines the ability to enable and disable SMDS pdu violation traps on this logical port. This functionality applies t… |
1.3.6.1.4.1.277.1.5.1.1.232 | lportSmdsPduViolThresh | 0 | 0 | This object defines the Smds pdu violation threshold for this logical port. The allowable range of threshold values is 1-255. The… |
1.3.6.1.4.1.277.1.5.1.1.233 | lportSmdsPduHdrSip3SaNotFound | 0 | 0 | This object provides the Smds destination address and Smds source address of the last Smds pdu to cause the violation Smds Sa Not… |
1.3.6.1.4.1.277.1.5.1.1.234 | lportSmdsPduHdrSip3SaDaOnSamePort | 0 | 0 | This object provides the Smds destination address and Smds source address of the last Smds pdu to cause the violation Smds Sa Da … |
1.3.6.1.4.1.277.1.5.1.1.235 | lportSmdsPduHdrSip3DstGaNotFound | 0 | 0 | This object provides the Smds destination address and Smds source address of the last Smds pdu to cause the violation Smds Dst Ga… |
1.3.6.1.4.1.277.1.5.1.1.236 | lportSmdsPduHdrSip3DstIaScrnFail | 0 | 0 | This object provides the Smds destination address and Smds source address of the last Smds pdu to cause the violation Smds Dst Ia… |
1.3.6.1.4.1.277.1.5.1.1.237 | lportSmdsPduHdrSip3SaValFail | 0 | 0 | This object provides the Smds destination address and Smds source address of the last Smds pdu to cause the violation Smds Sa Val… |
1.3.6.1.4.1.277.1.5.1.1.238 | lportSmdsPduHdrSip3DstIaNotFound | 0 | 0 | This object provides the Smds destination address and Smds source address of the last Smds pdu to cause the violation Smds Dst Ia… |
1.3.6.1.4.1.277.1.5.1.1.239 | lportSmdsPduHdrSip3SrcIaScrnFail | 0 | 0 | This object provides the Smds destination address and Smds source address of the last Smds pdu to cause the violation Smds Src Ia… |
1.3.6.1.4.1.277.1.5.1.1.240 | lportSmdsPduHdrSip3DstGaScrnFail | 0 | 0 | This object provides the Smds destination address and Smds source address of the last Smds pdu to cause the violation Smds Dst Ga… |
1.3.6.1.4.1.277.1.5.1.1.241 | lportSmdsPduHdrSip3SaTypeInvalid | 0 | 0 | This object provides the Smds destination address and Smds source address of the last Smds pdu to cause the violation Smds Sa Typ… |
1.3.6.1.4.1.277.1.5.1.1.242 | lportSmdsPduHdrSip3DaTypeInvalid | 0 | 0 | This object provides the Smds destination address and Smds source address of the last Smds pdu to cause the violation Smds Da Typ… |
1.3.6.1.4.1.277.1.5.1.1.243 | lportSmdsPduHdrDxi2LinkIdInvalid | 0 | 0 | This object provides the dxi2 header of the last Smds pdu to cause the violation Dxi2 Link Id Invalid. The length of this object … |
1.3.6.1.4.1.277.1.5.1.1.244 | lportSmdsPduHdrDxi2CrInvalid | 0 | 0 | This object provides the dxi2 header of the last Smds pdu to cause the violation Dxi2 Cr Invalid. The length of this object is 4 … |
1.3.6.1.4.1.277.1.5.1.1.245 | lportSmdsPduHdrDxi2CtrlInvalid | 0 | 0 | This object provides the dxi2 header of the last Smds pdu to cause the violation Dxi2 Ctrl Invalid. The length of this object is … |
1.3.6.1.4.1.277.1.5.1.1.246 | lportSmdsPduHdrDxi2StationIdInvalid | 0 | 0 | This object provides the dxi2 header of the last Smds pdu to cause the violation Dxi2 Station Id Invalid. The length of this obje… |
1.3.6.1.4.1.277.1.5.1.1.247 | lportSmdsPduHdrDxi2AeInvalid | 0 | 0 | This object provides the dxi2 header of the last Smds pdu to cause the violation Dxi2 Ae Invalid. The length of this object is 4 … |
1.3.6.1.4.1.277.1.5.1.1.248 | lportDS0FarendLpbkEnabled | 0 | 0 | Set a single DS0 into farend loopback 1-24. |
1.3.6.1.4.1.277.1.5.1.1.249 | lportDS0FarendLpbkDisabled | 0 | 0 | Set a single DS0 out farend loopback 1-24. |
1.3.6.1.4.1.277.1.5.1.1.250 | lportTrkProtFailureThreshold | 0 | 0 | The time, measured in seconds, that Trunk Protocol waits before transitioning the state of an unresponsive trunk from UP to DOWN.… |
1.3.6.1.4.1.277.1.5.1.1.251 | lportPtr | 0 | 0 | An octet string indicating the lport pointer. |
1.3.6.1.4.1.277.1.5.1.1.252 | lportISDNPoolUtil | 0 | 0 | The percent utilization of the B-channel pool that this b-channel belongs to. |
1.3.6.1.4.1.277.1.5.1.1.253 | lportISDNIpAddrAssignFail, lportPPPNegotiationFailCode | 0 | 0 | The cause value for why PPP negotiation has failed. |
1.3.6.1.4.1.277.1.5.1.1.254 | lportTrkUtilQoS1 | 0 | 0 | An estimate of the real QoS1 utilization of the trunk bandwidth in terms of a percentage of the configured trunk bandwidth. |
1.3.6.1.4.1.277.1.5.1.1.255 | lportTrkUtilQoS2 | 0 | 0 | An estimate of the real QoS2 utilization of the trunk bandwidth in terms of a percentage of the configured trunk bandwidth. |
1.3.6.1.4.1.277.1.5.1.1.256 | lportTrkUtilQoS3 | 0 | 0 | An estimate of the real QoS3 utilization of the trunk bandwidth in terms of a percentage of the configured trunk bandwidth. |
1.3.6.1.4.1.277.1.5.1.1.257 | lportTrkUtilQoS4 | 0 | 0 | An estimate of the real QoS4 utilization of the trunk bandwidth in terms of a percentage of the configured trunk bandwidth. |
1.3.6.1.4.1.277.1.5.1.1.258 | lportIlmiNumOctetsTx | 0 | 0 | The number of ILMI octets transmitted on this ATM port. |
1.3.6.1.4.1.277.1.5.1.1.259 | lportIlmiNumOctetsRx | 0 | 0 | The number of ILMI octets received on this ATM port. |
1.3.6.1.4.1.277.1.5.1.1.260 | lportIlmiNumPdusTx | 0 | 0 | The number of ILMI PDU's transmitted on this ATM port. |
1.3.6.1.4.1.277.1.5.1.1.261 | lportIlmiNumPdusRx | 0 | 0 | The number of properly formatted ILMI PDU's received on this ATM port. |
1.3.6.1.4.1.277.1.5.1.1.262 | lportIlmiNumErrorsRx | 0 | 0 | The number of improperly formatted ILMI PDU's received on this ATM port. |
1.3.6.1.4.1.277.1.5.1.1.263 | lportIlmiNumUmePollsTx | 0 | 0 | The number of ILMI polls sent by the UME entity on this ATM DCE port. |
1.3.6.1.4.1.277.1.5.1.1.264 | lportIlmiNumUmeResponsesRx | 0 | 0 | The number of ILMI poll responses received by the UME entity on this ATM DCE port. |
1.3.6.1.4.1.277.1.5.1.1.265 | lportIlmiVPI | 0 | 0 | The VPI value of the VCC provisioned for the ILMI. The default value is 0. |
1.3.6.1.4.1.277.1.5.1.1.266 | lportIlmiVCI | 0 | 0 | The VCI value of the VCC provisioned for the ILMI. The default value is 16. |
1.3.6.1.4.1.277.1.5.1.1.267 | lportInCells | 0 | 0 | The total number of cells received |
1.3.6.1.4.1.277.1.5.1.1.268 | lportOutCells | 0 | 0 | The total number of cells transmitted |
1.3.6.1.4.1.277.1.5.1.1.269 | lportDS1ChannelId | 0 | 0 | The channel id of the DS1 channel for the channelized DS3 IOP. |
1.3.6.1.4.1.277.1.5.1.1.270 | lportCDV | 0 | 0 | The Cell Delay Variation of this port measured in microseconds. |
1.3.6.1.4.1.277.1.5.1.1.271 | lportAtmTrkIomCktDiagStr | 0 | 0 | Internal diagnostic information. |
1.3.6.1.4.1.277.1.5.1.1.272 | lportAtmTrkSpCktDiagStr | 0 | 0 | Internal diagnostic information. |
1.3.6.1.4.1.277.1.5.1.1.273 | lportAuthState | 0 | 0 | Authentication enabled for this port, yes or no. |
1.3.6.1.4.1.277.1.5.1.1.274 | lportAuthDomainID | 0 | 0 | Authentication Domain ID for this lport. |
1.3.6.1.4.1.277.1.5.1.1.275 | lportAuthPPPOption | 0 | 0 | PPP authentication options. |
1.3.6.1.4.1.277.1.5.1.1.276 | lportAuthFailReason | 0 | 0 | Reason for authentication failure - trap sent to NMS. |
1.3.6.1.4.1.277.1.5.1.1.277 | lportEchoRequestOption | 0 | 0 | The sending of Echo Requests enabled for this port, yes or no. |
1.3.6.1.4.1.277.1.5.1.1.278 | lportEchoRequestInterval | 0 | 0 | The # seconds to wait between sending Echo Requests. |
1.3.6.1.4.1.277.1.5.1.1.279 | lportEchoRequestMaxTries | 0 | 0 | The max # times to send an Echo Request without getting a response. |
1.3.6.1.4.1.277.1.5.1.1.280 | lportMultilinkProtocolOption | 0 | 0 | PPP Multilink Protocol enabled for this port, yes or no. |
1.3.6.1.4.1.277.1.5.1.1.281 | lportMultilinkProtocolFailReason | 0 | 0 | Failure to create an MP bundle or to add a link to an MP Bundle - trap sent. |
1.3.6.1.4.1.277.1.5.1.1.282 | lportBandwidthAllocProtocolOption | 0 | 0 | PPP Bandwidth Alloc Protocol enabled for this port, yes or no. |
1.3.6.1.4.1.277.1.5.1.1.283 | lportBandwidthAllocProtocolCallFailReason | 0 | 0 | BAP Call Fail Status code (Q.931 cause code) - trap sent to NMS. |
1.3.6.1.4.1.277.1.5.1.1.284 | lportPrivateNetOverflow | 0 | 0 | Indicates how circuits belonging to private lports are handled, when the resources of the network have become exhausted. If set t… |
1.3.6.1.4.1.277.1.5.1.1.285 | lportCbrFifoHalfLength | 0 | 0 | CBR card was never released. Determines the size of the FIFO used on the CBR COBRA. The unit are the number of cells stored in th… |
1.3.6.1.4.1.277.1.5.1.1.286 | lportCustomerID | 0 | 0 | The Customer that owns this lport. For Virtual Private Networking Support. |
1.3.6.1.4.1.277.1.5.1.1.287 | lportCongestThresh0 | 0 | 0 | Congestion threshold #0 for NTM/NDC in cells/second. Used as a severe congestion abatement threshold on an IOM. |
1.3.6.1.4.1.277.1.5.1.1.288 | lportCongestThresh1 | 0 | 0 | Congestion threshold #1 for NTM/NDC in cells/second. Used as a low congestion threshold on an IOM. |
1.3.6.1.4.1.277.1.5.1.1.289 | lportCongestThresh2 | 0 | 0 | Congestion threshold #2 for NTM/NDC in cells/second Used as a high congestion threshold on an IOM. |
1.3.6.1.4.1.277.1.5.1.1.290 | lportCongestThresh3 | 0 | 0 | Congestion threshold #3 for NTM/NDC in cells/second. Used as a severe congestion threshold on an IOM. |
1.3.6.1.4.1.277.1.5.1.1.291 | lportSevereCongestNotifyTime | 0 | 0 | Selects a minimum severe congestion period upon which an alarm is generated on an IOM. Default value is 30 seconds. |
1.3.6.1.4.1.277.1.5.1.1.292 | lportSevereCongestStatus | 0 | 0 | Indicates the state of severe congestion on a logical port. |
1.3.6.1.4.1.277.1.5.1.1.293 | lportSmdsNumInFramesIa | 0 | 0 | Number of SMDS IA Frames received on an SSI/DXI-SNI lport. |
1.3.6.1.4.1.277.1.5.1.1.294 | lportSmdsNumInBytesIa | 0 | 0 | Number of SMDS IA Bytes received on an SSI/DXI-SNI lport. |
1.3.6.1.4.1.277.1.5.1.1.295 | lportSmdsNumInFramesGa | 0 | 0 | Number of SMDS GA Frames received on an SSI/DXI-SNI lport. |
1.3.6.1.4.1.277.1.5.1.1.296 | lportSmdsNumInBytesGa | 0 | 0 | Number of SMDS GA Bytes received on an SSI/DXI-SNI lport. |
1.3.6.1.4.1.277.1.5.1.1.297 | lportSmdsNumOutFramesIa | 0 | 0 | Number of SMDS IA Frames transmitted on an SSI/DXI-SNI lport. |
1.3.6.1.4.1.277.1.5.1.1.298 | lportSmdsNumOutBytesIa | 0 | 0 | Number of SMDS IA Bytes transmitted on an SSI/DXI-SNI lport. |
1.3.6.1.4.1.277.1.5.1.1.299 | lportSmdsNumOutFramesGa | 0 | 0 | Number of SMDS GA Frames transmitted on an SSI/DXI-SNI lport. |
1.3.6.1.4.1.277.1.5.1.1.300 | lportSmdsNumOutBytesGa | 0 | 0 | Number of SMDS GA Bytes transmitted on an SSI/DXI-SNI lport. |
1.3.6.1.4.1.277.1.5.1.1.301 | lportAtmTrkCLPOut | 0 | 0 | CLP mapping for circuit data carried over an ATM trunk. If clp_always_0 is selected then all circuit data sent over the ATM trun… |
1.3.6.1.4.1.277.1.5.1.1.302 | lportAtmTrkCLPIn | 0 | 0 | CLP mapping for circuit data received from an ATM trunk. If clp_always_0 is selected then all circuit data received from the ATM… |
1.3.6.1.4.1.277.1.5.1.1.303 | lportAtmTrkEFCIOut | 0 | 0 | EFCI mapping for circuit data carried over an ATM trunk. If efci_always_0 is selected then all circuit data sent over the ATM tr… |
1.3.6.1.4.1.277.1.5.1.1.304 | lportAtmTrkEFCIIn | 0 | 0 | EFCI mapping for circuit data received from an ATM trunk. If efci_always_0 is selected then all circuit data received from the A… |
1.3.6.1.4.1.277.1.5.1.1.305 | lportBadPVCFactor | 0 | 0 | The factor used to determine the threshold for bad PVC detection. Its value ranges from 0 to 32. The relationship between the th… |
1.3.6.1.4.1.277.1.5.1.1.306 | lportAmberReductionPm | 0 | 0 | The percentage of amber frame reduction when mild congestion happens, by default, it is set to 50. |
1.3.6.1.4.1.277.1.5.1.1.307 | lportAmberReductionPs | 0 | 0 | The percentage of amber frame reduction when severe congestion happens, by default, it is set to 75. |
1.3.6.1.4.1.277.1.5.1.1.308 | lportCongestionCheckInterval | 0 | 0 | Specifies the interval (measured in seconds) between successive congestion state checking on a port. Default is 1 second. |
1.3.6.1.4.1.277.1.5.1.1.309 | lportCongestionClearDelay | 0 | 0 | Specifies, the delay (measured in seconds) before congestion clearance message is sent when the congested port becomes less cong… |
1.3.6.1.4.1.277.1.5.1.1.310 | lportNrtsRmGenType | 0 | 0 | The type of RM cells the NRTS processor generates on this lport. |
1.3.6.1.4.1.277.1.5.1.1.311 | lportNrtsRmTermType | 0 | 0 | The type of RM cells the NRTS processor terminates on this lport. |
1.3.6.1.4.1.277.1.5.1.1.312 | lportNrtsEfciCheck | 0 | 0 | Whether the NRTS processor checks the EFCI bit for circuits on this lport when incrementing EFCI counts. |
1.3.6.1.4.1.277.1.5.1.1.313 | lportNrtsBufAlloc | 0 | 0 | Cell buffer size for this lport controlled by the NRTS processor. |
1.3.6.1.4.1.277.1.5.1.1.314 | lportNrtsClp01Thresh | 0 | 0 | The CLP=0+1 threshold for this lport used by the NRTS processor. Must be smaller than the cell buffer size allocated for this lpo… |
1.3.6.1.4.1.277.1.5.1.1.315 | lportNrtsDiscardThresh | 0 | 0 | The CLP=1 discard threshold for this lport used by the NRTS processor. Must be smaller than the CLP=0+1 threshold. May also be us… |
1.3.6.1.4.1.277.1.5.1.1.316 | lportNrtsEfciThresh | 0 | 0 | The EFCI threshold for this lport used by the NRTS processor. Must be smaller than the CLP=0+1 and discard thresholds. |
1.3.6.1.4.1.277.1.5.1.1.317 | lportNrtsRmCellCount | 0 | 0 | The number of RM cells received on this lport by the NRTS processor. |
1.3.6.1.4.1.277.1.5.1.1.318 | lportCloseLoopSwitch | 0 | 0 | Close loop congestion control function switch on this logical port. 0: Close loop control OFF, 1: Close loop control ON. By de… |
1.3.6.1.4.1.277.1.5.1.1.319 | lportAtmVPIStop | 0 | 0 | The stop value for the PVC VPI range. Used only by VP Mux termination lports |
1.3.6.1.4.1.277.1.5.1.1.320 | lportSegmentation | 0 | 0 | Specifies the transportation feature of a trunk port. If enabled, the port cuts user packets into fix-length segments for delive… |
1.3.6.1.4.1.277.1.5.1.1.321 | lportServiceClassType | 0 | 0 | Specifies the service class types to be supported by the logical port. the valid values and their corresponding definitions are:… |
1.3.6.1.4.1.277.1.5.1.1.322 | lportTrkOSPFAreaID | 0 | 0 | OSPF Area ID to which the trunk belongs. Default value is 0.0.0.1 for historical reasons. |
1.3.6.1.4.1.277.1.5.1.1.323 | lportAtmVPIRmtStop | 0 | 0 | RMT VPI range is specified over anOPTimum trunk logical ports. This range falls within the VPI range as specified for SVPs. This … |
1.3.6.1.4.1.277.1.5.1.1.327 | lportOutVAvailbwQoS1CPS | 0 | 0 | Current outgoing available virtual bandwidth reserved for QoS class 1 measured in cells per second. |
1.3.6.1.4.1.277.1.5.1.1.328 | lportOutVAvailbwQoS2CPS | 0 | 0 | Current outgoing available virtual bandwidth reserved for QoS class 2 measured in cells per second. |
1.3.6.1.4.1.277.1.5.1.1.329 | lportOutVAvailbwQoS3CPS | 0 | 0 | Current outgoing available virtual bandwidth reserved for QoS class 3 measured in cells per second. |
1.3.6.1.4.1.277.1.5.1.1.330 | lportOutVAvailbwQoS4CPS | 0 | 0 | Current outgoing available virtual bandwidth reserved for QoS class 4 measured in cells per second. |
1.3.6.1.4.1.277.1.5.1.1.331 | lportInVAvailbwQoS1CPS | 0 | 0 | Current incoming available virtual bandwidth reserved for QoS class 1 measured in cells per second. |
1.3.6.1.4.1.277.1.5.1.1.332 | lportInVAvailbwQoS2CPS | 0 | 0 | Current incoming available virtual bandwidth reserved for QoS class 2 measured in cells per second. |
1.3.6.1.4.1.277.1.5.1.1.333 | lportInVAvailbwQoS3CPS | 0 | 0 | Current incoming available virtual bandwidth reserved for QoS class 3 measured in cells per second. |
1.3.6.1.4.1.277.1.5.1.1.334 | lportInVAvailbwQoS4CPS | 0 | 0 | Current incoming available virtual bandwidth reserved for QoS class 4 measured in cells per second. |
1.3.6.1.4.1.277.1.5.1.1.335 | lportOutAllocbwQoS1CPS | 0 | 0 | Current outgoing allocated bandwidth for QoS Class 1 measured in cells per second. |
1.3.6.1.4.1.277.1.5.1.1.336 | lportOutAllocbwQoS2CPS | 0 | 0 | Current outgoing allocated bandwidth for QoS Class 2 measured in cells per second. |
1.3.6.1.4.1.277.1.5.1.1.337 | lportOutAllocbwQoS3CPS | 0 | 0 | Current outgoing allocated bandwidth for QoS Class 3 measured in cells per second. |
1.3.6.1.4.1.277.1.5.1.1.338 | lportOutAllocbwQoS4CPS | 0 | 0 | Current outgoing allocated bandwidth for QoS Class 4 measured in cells per second. |
1.3.6.1.4.1.277.1.5.1.1.339 | lportInAllocbwQoS1CPS | 0 | 0 | Current incoming allocated bandwidth for QoS Class 1 measured in cells per second. |
1.3.6.1.4.1.277.1.5.1.1.340 | lportInAllocbwQoS2CPS | 0 | 0 | Current incoming allocated bandwidth for QoS Class 2 measured in cells per second. |
1.3.6.1.4.1.277.1.5.1.1.341 | lportInAllocbwQoS3CPS | 0 | 0 | Current incoming allocated bandwidth for QoS Class 3 measured in cells per second. |
1.3.6.1.4.1.277.1.5.1.1.342 | lportInAllocbwQoS4CPS | 0 | 0 | Current incoming allocated bandwidth for QoS Class 4 measured in cells per second. |
1.3.6.1.4.1.277.1.5.1.1.343 | lportBundleId | 0 | 0 | The lport Id if the ML Trunk Bundle lport is added to the lport configuration, a zero indicates that is lport is not associated … |
1.3.6.1.4.1.277.1.5.1.1.344 | lportCLLMAdminState | 0 | 0 | The Administrative status of the CLLM notification on this logical port. |
1.3.6.1.4.1.277.1.5.1.1.345 | lportCLLMInterval | 0 | 0 | The time duration between two consecutive CLLM messages sent on a the UNI port, in seconds. The CLLM message is sent as long as … |
1.3.6.1.4.1.277.1.5.1.1.346 | lportCLLMCount | 0 | 0 | This parameter shows the number of CLLM PDUs sent out so far. |
1.3.6.1.4.1.277.1.5.1.1.347 | lportCLLMThresholdNone | 0 | 0 | This is the percentage threshold value of BECN frames received on any VC on this port. If the percentage of BECN frames on recei… |
1.3.6.1.4.1.277.1.5.1.1.348 | lportCLLMThresholdMild | 0 | 0 | This is the percentage threshold value of BECN frames received on any VC on this port. If the percentage of BECN frames received… |
1.3.6.1.4.1.277.1.5.1.1.349 | lportTrkIfInOctetsPeak | 0 | 0 | The 5-minute peak value of the number of input octets (bytes) for a trunk - from Bulk Statistics. Note that this is a 64-bit cou… |
1.3.6.1.4.1.277.1.5.1.1.350 | lportTrkIfOutOctetsPeak | 0 | 0 | The 5-minute peak value of the number of output octets (bytes) for a trunk - from Bulk Statistics. Note that this is a 64-bit co… |
1.3.6.1.4.1.277.1.5.1.1.351 | lportTrkIfInErrorsPeak | 0 | 0 | The 5-minute peak value of the number of input octets (bytes) in error for a trunk - from Bulk Statistics. Note that this is a 6… |
1.3.6.1.4.1.277.1.5.1.1.352 | lportTrkIfOutErrorsPeak | 0 | 0 | The 5-minute peak value of the number of output octets (bytes) in error for a trunk - from Bulk Statistics. Note that this is a … |
1.3.6.1.4.1.277.1.5.1.1.353 | lportFRInOctetsPeak | 0 | 0 | The 5-minute peak value of the number of input octets (bytes) for a Frame Relay UNI/NNI - from Bulk Statistics. |
1.3.6.1.4.1.277.1.5.1.1.354 | lportFROutOctetsPeak | 0 | 0 | The 5-minute peak value of the number of output octets (bytes) for a Frame Relay UNI/NNI - from Bulk Statistics. |
1.3.6.1.4.1.277.1.5.1.1.355 | lportFRInErrorsPeak | 0 | 0 | The 5-minute peak value of the number of input octets (bytes) in error for a Frame Relay UNI/NNI - from Bulk Statistics. |
1.3.6.1.4.1.277.1.5.1.1.356 | lportFROutErrorsPeak | 0 | 0 | The 5-minute peak value of the number of output octets (bytes) in error for a Frame Relay UNI/NNI - from Bulk Statistics. |
1.3.6.1.4.1.277.1.5.1.1.357 | lportCtlUpcEnable | 0 | 0 | Enable/Disable UPC for control circuits |
1.3.6.1.4.1.277.1.5.1.1.358 | lportEthernetTxEncapsulation | 0 | 0 | Controls the encapsulation type for transmitted IP frames out an Ethernet port. |