The cause of the call rejection - inability to
authenticate or pool is busy.
Parsed from file cascade.mib.txt
Company: None
Module: CASCADE-MIB
The cause of the call rejection - inability to
authenticate or pool is busy.
Parsed from file CASCADE-MIB.mib
Module: CASCADE-MIB
Vendor: Cascade Communications Corp.
Module: CASCADE-MIB
[Automatically extracted from oidview.com]
lportISDNCallRejCause OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The cause of the call rejection - inability to authenticate or pool is busy." ::= { lportEntry 174 }
lportISDNCallRejCause OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The cause of the call rejection - inability to authenticate or pool is busy." ::= { lportEntry 174 }
To many brothers! Only 100 nearest brothers are shown.
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
... | ||||
1.3.6.1.4.1.277.1.5.1.1.124 | lportSmdsCntSip3SaInvalids | 0 | 0 | Number of instances that SIP3 source address is invalid. |
1.3.6.1.4.1.277.1.5.1.1.125 | lportSmdsCntSip3BasizeMismatchs | 0 | 0 | Number of instances that SIP3 BA sizes in the header and trailer are not matched. |
1.3.6.1.4.1.277.1.5.1.1.126 | lportSmdsCntSip3HeLenInvalids | 0 | 0 | Number of instances that SIP3 header extension length is invalid. |
1.3.6.1.4.1.277.1.5.1.1.127 | lportSmdsCntSip3HeVersionInvalids | 0 | 0 | Number of instances that SIP3 header extension version is invalid. |
1.3.6.1.4.1.277.1.5.1.1.128 | lportSmdsCntSip3HeCarrierInvalids | 0 | 0 | Number of instances that SIP3 header extension carrier is invalid. |
1.3.6.1.4.1.277.1.5.1.1.129 | lportSmdsCntSip3Crc32Errors | 0 | 0 | Number of SIP3 CRC errors. |
1.3.6.1.4.1.277.1.5.1.1.130 | lportSmdsCntSip3TRsvdInvalids | 0 | 0 | Number of instances that SIP3 reserved field in trailer is invalid. |
1.3.6.1.4.1.277.1.5.1.1.131 | lportSmdsCntSaNotFounds | 0 | 0 | Number of instances that source address not found. |
1.3.6.1.4.1.277.1.5.1.1.132 | lportSmdsCntSaValidationFails | 0 | 0 | Number of instances that source address validation failed. |
1.3.6.1.4.1.277.1.5.1.1.133 | lportSmdsCntSaDaOnSamePorts | 0 | 0 | Number of instances that source address and destination addresses are on the same port. |
1.3.6.1.4.1.277.1.5.1.1.134 | lportSmdsCntDaSsiMismacths | 0 | 0 | Obsolete. |
1.3.6.1.4.1.277.1.5.1.1.135 | lportSmdsCntSsiProvisionErrors | 0 | 0 | Obsolete. |
1.3.6.1.4.1.277.1.5.1.1.136 | lportSmdsCntDstIaNotFounds | 0 | 0 | Number of instances that destination individual address not found. |
1.3.6.1.4.1.277.1.5.1.1.137 | lportSmdsCntDstGaNotFounds | 0 | 0 | Number of instances that destination group address not found. |
1.3.6.1.4.1.277.1.5.1.1.138 | lportSmdsCntSrcIaScrnFails | 0 | 0 | Number of instances that source individual address screening failed. |
1.3.6.1.4.1.277.1.5.1.1.139 | lportSmdsCntDstIaScrnFails | 0 | 0 | Number of instances that destination individual address screening failed. |
1.3.6.1.4.1.277.1.5.1.1.140 | lportSmdsCntDstGaScrnFails | 0 | 0 | Number of instances that destination group address screening failed. |
1.3.6.1.4.1.277.1.5.1.1.141 | lportSmdsTotalDiscards | 0 | 0 | total number of discards. |
1.3.6.1.4.1.277.1.5.1.1.142 | lportSmdsSsiNode | 0 | 0 | The Node of the SSI which this DXI/SNI is multiplexed to. |
1.3.6.1.4.1.277.1.5.1.1.143 | lportBilling | 0 | 0 | This object defines the ability to enable and disable billing on this logical port (for SMDS this must be a DXI). When the value… |
1.3.6.1.4.1.277.1.5.1.1.144 | lportSmdsReserved144, lportSmdsCntDstGaSrcIsCascade | 0 | 0 | reserved! ignore! |
1.3.6.1.4.1.277.1.5.1.1.145 | lportLinkStatus | 0 | 0 | Link protocol status. The Link protocol may be frame relay LMI, DXI heart beat poll, PPP LCP, etc, depends on the lport type. |
1.3.6.1.4.1.277.1.5.1.1.146 | lportLMIDelay | 0 | 0 | The number of seconds 1-9 to buffer (or initiate) a FR LMI async update (or ATM OAM alarms) to allow filtering of LMI async even… |
1.3.6.1.4.1.277.1.5.1.1.147 | lportCRC | 0 | 0 | Lport CRC selection: 0 - 16 bit CRC 1 - 32 bit CRC |
1.3.6.1.4.1.277.1.5.1.1.148 | lportSmdsMulticastGa | 0 | 0 | The Multicast Group Address is the smds broadcast address which is used to get smds address from its IP address. |
1.3.6.1.4.1.277.1.5.1.1.149 | lportSmdsMulticastIpAddr | 0 | 0 | This IP address is this logical port's IP address. |
1.3.6.1.4.1.277.1.5.1.1.150 | lportAtmVPI | 0 | 0 | VPI value in the ATM cell header: ATM DXI with HSSI IOP VPI (4 lsb bit) range: 0 - 15 ATM UNI DS3/E3 IOP VPI (4 lsb bit) range… |
1.3.6.1.4.1.277.1.5.1.1.151 | lportAtmVCI | 0 | 0 | VCI value in the ATM cell header: ATM DXI with HSSI IOP VCI (6 lsb bit) range: 0 - 63 ATM UNI DS3/E3 IOP VCI (8 lsb bit) range… |
1.3.6.1.4.1.277.1.5.1.1.152 | lportPeakCellRateindex | 0 | 0 | Peak cell rate queue index |
1.3.6.1.4.1.277.1.5.1.1.153 | lportSustCellRate | 0 | 0 | Sustainable cell rate in cell/second |
1.3.6.1.4.1.277.1.5.1.1.154 | lportBurstTolerance | 0 | 0 | Burst Tolerance in multiple of 32 cells |
1.3.6.1.4.1.277.1.5.1.1.155 | lportBuTrkOnFailure | 0 | 0 | Enables or disables trunk backup due to link down. |
1.3.6.1.4.1.277.1.5.1.1.156 | lportTrkFailureThrsh | 0 | 0 | The number of seconds a primary trunk must remain down for trunk backup to be initiated. |
1.3.6.1.4.1.277.1.5.1.1.157 | lportTrkRestThrsh | 0 | 0 | The number of seconds a primary trunk must remain up for trunk backup to be terminated |
1.3.6.1.4.1.277.1.5.1.1.158 | lportBuTrkRetryInt | 0 | 0 | The number of seconds between backup trunk call setup retries. |
1.3.6.1.4.1.277.1.5.1.1.159 | lportBuTrkRetryNum | 0 | 0 | The number of backup trunk call setup tries per call setup cycle. |
1.3.6.1.4.1.277.1.5.1.1.160 | lportBuTrkCycleInt | 0 | 0 | The number of seconds between backup trunk call setup cycles. |
1.3.6.1.4.1.277.1.5.1.1.161 | lportTrkManualBu | 0 | 0 | Initiate or terminate manual backup for a primary trunk. none neither initiate or terminate initCmd initiate operator commanded … |
1.3.6.1.4.1.277.1.5.1.1.162 | lportPrimTrk | 0 | 0 | Indicates the primary trunk lportIfIndex for which a backup trunk is serving as a backup. This value is also used to determine tr… |
1.3.6.1.4.1.277.1.5.1.1.163 | lportInitCallSetup | 0 | 0 | TRUE if node must initiate backup trunk call setup for this primary trunk. Otherwise FALSE. |
1.3.6.1.4.1.277.1.5.1.1.164 | lportBuFailReason | 0 | 0 | Indicates the reason for the failure to perform trunk backup. |
1.3.6.1.4.1.277.1.5.1.1.165 | lportQ922Enable | 0 | 0 | Set 1 to enable Q.922 on this port. Q.922 must be enabled if the port is used for SVC. |
1.3.6.1.4.1.277.1.5.1.1.166 | lportQ922State | 0 | 0 | Q.922 state. This object only makes sense when Q.922 is enabled. |
1.3.6.1.4.1.277.1.5.1.1.167 | lportTrkPduRevision | 0 | 0 | The Trunk PDU Revision number being used over this trunk. |
1.3.6.1.4.1.277.1.5.1.1.168 | lportPVCMgrPduRevision | 0 | 0 | The PVC Manager PDU Revision number being used over this trunk. |
1.3.6.1.4.1.277.1.5.1.1.169 | lportDS0LoopStatus | 0 | 0 | Indicates the DS0 Lpbk Status of the Lport. |
1.3.6.1.4.1.277.1.5.1.1.170 | lportISDNDuration | 0 | 0 | The number of seconds that the ISDN call has been established. |
1.3.6.1.4.1.277.1.5.1.1.171 | lportISDNSourceAddr | 0 | 0 | The E.164 address of the source of this ISDN connection. |
1.3.6.1.4.1.277.1.5.1.1.172 | lportISDNDestAddr | 0 | 0 | The E.164 address of the destination of this ISDN connection. |
1.3.6.1.4.1.277.1.5.1.1.173 | lportISDNIpAddr | 0 | 0 | The Ip Address of the client connected to this B-Channel |
1.3.6.1.4.1.277.1.5.1.1.175 | lportLastInvalidDLCI | 0 | 0 | This item pertains to user frame relay lports only. The frame relay header of the received frame contains a dlci, which uniquely… |
1.3.6.1.4.1.277.1.5.1.1.176 | lportTrkProtState | 0 | 0 | The current operational state of the link trunk protocol on this link. |
1.3.6.1.4.1.277.1.5.1.1.177 | lportTrkTrafficMix | 0 | 0 | The types of traffic allowed over a Cascade trunk. |
1.3.6.1.4.1.277.1.5.1.1.178 | lportNumVC | 0 | 0 | The number of VCs going to or through a particular port. |
1.3.6.1.4.1.277.1.5.1.1.179 | lportTrkAdminCost | 0 | 0 | The administrative cost of the trunk. Used when routing circuits. Trunks with lower costs are preferred. Value ranges from 1 to 6… |
1.3.6.1.4.1.277.1.5.1.1.180 | lportPrivateNet | 0 | 0 | If non-zero, indicates the private network that the lport belongs to. If 0, the lport is publicly shared. |
1.3.6.1.4.1.277.1.5.1.1.181 | lportTrkStaticDelay | 0 | 0 | The measured round-trip delay of the trunk, in milliseconds. Measured when the trunk last became operational. |
1.3.6.1.4.1.277.1.5.1.1.182 | lportTrkDynamicDelay | 0 | 0 | The recently measured round-tip delay of the trunk. May vary from lportTrkStaticDelay due to congestion, or reprovisioning of the… |
1.3.6.1.4.1.277.1.5.1.1.183 | lportAtmDataRateQoS1 | 0 | 0 | An estimate of the logical port's data rate in bits per second reserved for QoS class 1. |
1.3.6.1.4.1.277.1.5.1.1.184 | lportAtmDataRateQoS2 | 0 | 0 | An estimate of the logical port's data rate in bits per second reserved for QoS class 2. |
1.3.6.1.4.1.277.1.5.1.1.185 | lportAtmDataRateQoS3 | 0 | 0 | An estimate of the logical port's data rate in bits per second reserved for QoS class 3. |
1.3.6.1.4.1.277.1.5.1.1.186 | lportAtmDataRateQoS4 | 0 | 0 | An estimate of the logical port's data rate in bits per second reserved for QoS class 4. |
1.3.6.1.4.1.277.1.5.1.1.187 | lportOutVAvailbwQoS1 | 0 | 0 | Current outgoing available virtual bandwidth reserved for QoS class 1. |
1.3.6.1.4.1.277.1.5.1.1.188 | lportOutVAvailbwQoS2 | 0 | 0 | Current outgoing available virtual bandwidth reserved for QoS class 2. |
1.3.6.1.4.1.277.1.5.1.1.189 | lportOutVAvailbwQoS3 | 0 | 0 | Current outgoing available virtual bandwidth reserved for QoS class 3. |
1.3.6.1.4.1.277.1.5.1.1.190 | lportOutVAvailbwQoS4 | 0 | 0 | Current outgoing available virtual bandwidth reserved for QoS class 4. |
1.3.6.1.4.1.277.1.5.1.1.191 | lportInVAvailbwQoS1 | 0 | 0 | Current incoming available virtual bandwidth reserved for QoS class 1. |
1.3.6.1.4.1.277.1.5.1.1.192 | lportInVAvailbwQoS2 | 0 | 0 | Current incoming available virtual bandwidth reserved for QoS class 2. |
1.3.6.1.4.1.277.1.5.1.1.193 | lportInVAvailbwQoS3 | 0 | 0 | Current incoming available virtual bandwidth reserved for QoS class 3. |
1.3.6.1.4.1.277.1.5.1.1.194 | lportInVAvailbwQoS4 | 0 | 0 | Current incoming available virtual bandwidth reserved for QoS class 4. |
1.3.6.1.4.1.277.1.5.1.1.195 | lportOutAllocbwQoS1 | 0 | 0 | Current outgoing allocated bandwidth for QoS Class 1. |
1.3.6.1.4.1.277.1.5.1.1.196 | lportOutAllocbwQoS2 | 0 | 0 | Current outgoing allocated bandwidth for QoS Class 2. |
1.3.6.1.4.1.277.1.5.1.1.197 | lportOutAllocbwQoS3 | 0 | 0 | Current outgoing allocated bandwidth for QoS Class 3. |
1.3.6.1.4.1.277.1.5.1.1.198 | lportOutAllocbwQoS4 | 0 | 0 | Current outgoing allocated bandwidth for QoS Class 4. |
1.3.6.1.4.1.277.1.5.1.1.199 | lportInAllocbwQoS1 | 0 | 0 | Current incoming allocated bandwidth for QoS Class 1. |
1.3.6.1.4.1.277.1.5.1.1.200 | lportInAllocbwQoS2 | 0 | 0 | Current incoming allocated bandwidth for QoS Class 2. |
1.3.6.1.4.1.277.1.5.1.1.201 | lportInAllocbwQoS3 | 0 | 0 | Current incoming allocated bandwidth for QoS Class 3. |
1.3.6.1.4.1.277.1.5.1.1.202 | lportInAllocbwQoS4 | 0 | 0 | Current incoming allocated bandwidth for QoS Class 4. |
1.3.6.1.4.1.277.1.5.1.1.203 | lportDynamicQoSbw | 0 | 0 | Bitmap defining which QoS Classes should have bandwidth allocated dynamically from lportDataRate instead of reserving a percentag… |
1.3.6.1.4.1.277.1.5.1.1.204 | lportSVCRetryTimer, lportSvcHoldDownTimer | 0 | 0 | The duration in seconds (1..255) the network is allowed to re-establish a SVC after network failure before clearing the SVC. A va… |
1.3.6.1.4.1.277.1.5.1.1.205 | lportAtmNetworkType, lportAtmConnectionType | 0 | 0 | Whether this lport is supporting a private or public network. |
1.3.6.1.4.1.277.1.5.1.1.206 | lportAtmRouteMetricQoS1 | 0 | 0 | Routing metric associated with QoS Class 1. |
1.3.6.1.4.1.277.1.5.1.1.207 | lportAtmRouteMetricQoS2 | 0 | 0 | Routing metric associated with QoS Class 2. |
1.3.6.1.4.1.277.1.5.1.1.208 | lportAtmRouteMetricQoS3 | 0 | 0 | Routing metric associated with QoS Class 3. |
1.3.6.1.4.1.277.1.5.1.1.209 | lportAtmRouteMetricQoS4 | 0 | 0 | Routing metric associated with QoS Class 4. |
1.3.6.1.4.1.277.1.5.1.1.210 | lportIlmiPollTimeout | 0 | 0 | The duration in seconds (1..255) the ILMI poll is generated by the network-side UME. A value of 0 set to default polling period o… |
1.3.6.1.4.1.277.1.5.1.1.211 | lportAtmProtocol | 0 | 0 | UNI protocol version for this port. |
1.3.6.1.4.1.277.1.5.1.1.212 | lportIlmiAdminStatus | 0 | 0 | Administrative state for ILMI function on this port. |
1.3.6.1.4.1.277.1.5.1.1.213 | lportIlmiOperStatus | 0 | 0 | Operational status for ILMI function on this port. |
1.3.6.1.4.1.277.1.5.1.1.214 | lportIlmiPollRetry | 0 | 0 | The number of retries of ILMI poll request will be generated when network-side UME detects loss of ILMI connectivity. A value of… |
1.3.6.1.4.1.277.1.5.1.1.215 | lportAtmVpiBits | 0 | 0 | Number of bits of VPI supported. |
1.3.6.1.4.1.277.1.5.1.1.216 | lportAtmVciBits | 0 | 0 | Number of bits of VCI supported. |
1.3.6.1.4.1.277.1.5.1.1.217 | lportAtmOamAlarmEnable | 0 | 0 | If disabled then OAM alarms are not generated for circuits that are down on this lport. |
1.3.6.1.4.1.277.1.5.1.1.218 | lportInVAvailbw | 0 | 0 | Currently available Incoming virtual bandwidth. |
1.3.6.1.4.1.277.1.5.1.1.219 | lportbwUNIPolicy | 0 | 0 | The network policy towards requiring sufficient bandwidth at the UNI interface prior to allowing a circuit to be established. |
1.3.6.1.4.1.277.1.5.1.1.220 | lportStarvation | 0 | 0 | The CE/CBR card detected a starvation condition on this lport for an extended period |
1.3.6.1.4.1.277.1.5.1.1.221 | lportRecOverflow | 0 | 0 | The CE/CBR card detected a receive overflow condition on this lport for an extended period. |
1.3.6.1.4.1.277.1.5.1.1.222 | lportLossOfCellSequence | 0 | 0 | The CE/CBR card detected a LOS condition on this lport for an extended period. |
1.3.6.1.4.1.277.1.5.1.1.223 | lportLossOfStructurePointer | 0 | 0 | The structured CBR card detected a loss of structure pointer condition on this lport for an extended period. |
1.3.6.1.4.1.277.1.5.1.1.224 | lportCbrInsDummyCells | 0 | 0 | The number of dummy cells inserted due to cell loss on a constant bit rate (AAL1) interface. |
... |