Enable/Disable UPC for control circuits
Parsed from file cascade.mib.txt
Company: cascade
Module: CASCADE-MIB
Vendor: Cascade Communications
Module: CASCADE-MIB (cascade.mib)
Type: TABULAR
Access: read-write
Syntax: INTEGER
Automatically extracted from www.mibdepot.com
lportCtlUpcEnable OBJECT-TYPE SYNTAX INTEGER { disabled (1), enabled (2) } ACCESS read-write STATUS mandatory DESCRIPTION "Enable/Disable UPC for control circuits" DEFVAL { disabled } ::= { lportEntry 357 }
To many brothers! Only 100 nearest brothers are shown.
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
... | ||||
1.3.6.1.4.1.277.1.5.1.1.307 | lportAmberReductionPs | 0 | 0 | The percentage of amber frame reduction when severe congestion happens, by default, it is set to 75. |
1.3.6.1.4.1.277.1.5.1.1.308 | lportCongestionCheckInterval | 0 | 0 | Specifies the interval (measured in seconds) between successive congestion state checking on a port. Default is 1 second. |
1.3.6.1.4.1.277.1.5.1.1.309 | lportCongestionClearDelay | 0 | 0 | Specifies, the delay (measured in seconds) before congestion clearance message is sent when the congested port becomes less cong… |
1.3.6.1.4.1.277.1.5.1.1.310 | lportNrtsRmGenType | 0 | 0 | The type of RM cells the NRTS processor generates on this lport. |
1.3.6.1.4.1.277.1.5.1.1.311 | lportNrtsRmTermType | 0 | 0 | The type of RM cells the NRTS processor terminates on this lport. |
1.3.6.1.4.1.277.1.5.1.1.312 | lportNrtsEfciCheck | 0 | 0 | Whether the NRTS processor checks the EFCI bit for circuits on this lport when incrementing EFCI counts. |
1.3.6.1.4.1.277.1.5.1.1.313 | lportNrtsBufAlloc | 0 | 0 | Cell buffer size for this lport controlled by the NRTS processor. |
1.3.6.1.4.1.277.1.5.1.1.314 | lportNrtsClp01Thresh | 0 | 0 | The CLP=0+1 threshold for this lport used by the NRTS processor. Must be smaller than the cell buffer size allocated for this lpo… |
1.3.6.1.4.1.277.1.5.1.1.315 | lportNrtsDiscardThresh | 0 | 0 | The CLP=1 discard threshold for this lport used by the NRTS processor. Must be smaller than the CLP=0+1 threshold. May also be us… |
1.3.6.1.4.1.277.1.5.1.1.316 | lportNrtsEfciThresh | 0 | 0 | The EFCI threshold for this lport used by the NRTS processor. Must be smaller than the CLP=0+1 and discard thresholds. |
1.3.6.1.4.1.277.1.5.1.1.317 | lportNrtsRmCellCount | 0 | 0 | The number of RM cells received on this lport by the NRTS processor. |
1.3.6.1.4.1.277.1.5.1.1.318 | lportCloseLoopSwitch | 0 | 0 | Close loop congestion control function switch on this logical port. 0: Close loop control OFF, 1: Close loop control ON. By de… |
1.3.6.1.4.1.277.1.5.1.1.319 | lportAtmVPIStop | 0 | 0 | The stop value for the PVC VPI range. Used only by VP Mux termination lports |
1.3.6.1.4.1.277.1.5.1.1.320 | lportSegmentation | 0 | 0 | Specifies the transportation feature of a trunk port. If enabled, the port cuts user packets into fix-length segments for delive… |
1.3.6.1.4.1.277.1.5.1.1.321 | lportServiceClassType | 0 | 0 | Specifies the service class types to be supported by the logical port. the valid values and their corresponding definitions are:… |
1.3.6.1.4.1.277.1.5.1.1.322 | lportTrkOSPFAreaID | 0 | 0 | OSPF Area ID to which the trunk belongs. Default value is 0.0.0.1 for historical reasons. |
1.3.6.1.4.1.277.1.5.1.1.323 | lportAtmVPIRmtStop | 0 | 0 | RMT VPI range is specified over anOPTimum trunk logical ports. This range falls within the VPI range as specified for SVPs. This … |
1.3.6.1.4.1.277.1.5.1.1.327 | lportOutVAvailbwQoS1CPS | 0 | 0 | Current outgoing available virtual bandwidth reserved for QoS class 1 measured in cells per second. |
1.3.6.1.4.1.277.1.5.1.1.328 | lportOutVAvailbwQoS2CPS | 0 | 0 | Current outgoing available virtual bandwidth reserved for QoS class 2 measured in cells per second. |
1.3.6.1.4.1.277.1.5.1.1.329 | lportOutVAvailbwQoS3CPS | 0 | 0 | Current outgoing available virtual bandwidth reserved for QoS class 3 measured in cells per second. |
1.3.6.1.4.1.277.1.5.1.1.330 | lportOutVAvailbwQoS4CPS | 0 | 0 | Current outgoing available virtual bandwidth reserved for QoS class 4 measured in cells per second. |
1.3.6.1.4.1.277.1.5.1.1.331 | lportInVAvailbwQoS1CPS | 0 | 0 | Current incoming available virtual bandwidth reserved for QoS class 1 measured in cells per second. |
1.3.6.1.4.1.277.1.5.1.1.332 | lportInVAvailbwQoS2CPS | 0 | 0 | Current incoming available virtual bandwidth reserved for QoS class 2 measured in cells per second. |
1.3.6.1.4.1.277.1.5.1.1.333 | lportInVAvailbwQoS3CPS | 0 | 0 | Current incoming available virtual bandwidth reserved for QoS class 3 measured in cells per second. |
1.3.6.1.4.1.277.1.5.1.1.334 | lportInVAvailbwQoS4CPS | 0 | 0 | Current incoming available virtual bandwidth reserved for QoS class 4 measured in cells per second. |
1.3.6.1.4.1.277.1.5.1.1.335 | lportOutAllocbwQoS1CPS | 0 | 0 | Current outgoing allocated bandwidth for QoS Class 1 measured in cells per second. |
1.3.6.1.4.1.277.1.5.1.1.336 | lportOutAllocbwQoS2CPS | 0 | 0 | Current outgoing allocated bandwidth for QoS Class 2 measured in cells per second. |
1.3.6.1.4.1.277.1.5.1.1.337 | lportOutAllocbwQoS3CPS | 0 | 0 | Current outgoing allocated bandwidth for QoS Class 3 measured in cells per second. |
1.3.6.1.4.1.277.1.5.1.1.338 | lportOutAllocbwQoS4CPS | 0 | 0 | Current outgoing allocated bandwidth for QoS Class 4 measured in cells per second. |
1.3.6.1.4.1.277.1.5.1.1.339 | lportInAllocbwQoS1CPS | 0 | 0 | Current incoming allocated bandwidth for QoS Class 1 measured in cells per second. |
1.3.6.1.4.1.277.1.5.1.1.340 | lportInAllocbwQoS2CPS | 0 | 0 | Current incoming allocated bandwidth for QoS Class 2 measured in cells per second. |
1.3.6.1.4.1.277.1.5.1.1.341 | lportInAllocbwQoS3CPS | 0 | 0 | Current incoming allocated bandwidth for QoS Class 3 measured in cells per second. |
1.3.6.1.4.1.277.1.5.1.1.342 | lportInAllocbwQoS4CPS | 0 | 0 | Current incoming allocated bandwidth for QoS Class 4 measured in cells per second. |
1.3.6.1.4.1.277.1.5.1.1.343 | lportBundleId | 0 | 0 | The lport Id if the ML Trunk Bundle lport is added to the lport configuration, a zero indicates that is lport is not associated … |
1.3.6.1.4.1.277.1.5.1.1.344 | lportCLLMAdminState | 0 | 0 | The Administrative status of the CLLM notification on this logical port. |
1.3.6.1.4.1.277.1.5.1.1.345 | lportCLLMInterval | 0 | 0 | The time duration between two consecutive CLLM messages sent on a the UNI port, in seconds. The CLLM message is sent as long as … |
1.3.6.1.4.1.277.1.5.1.1.346 | lportCLLMCount | 0 | 0 | This parameter shows the number of CLLM PDUs sent out so far. |
1.3.6.1.4.1.277.1.5.1.1.347 | lportCLLMThresholdNone | 0 | 0 | This is the percentage threshold value of BECN frames received on any VC on this port. If the percentage of BECN frames on recei… |
1.3.6.1.4.1.277.1.5.1.1.348 | lportCLLMThresholdMild | 0 | 0 | This is the percentage threshold value of BECN frames received on any VC on this port. If the percentage of BECN frames received… |
1.3.6.1.4.1.277.1.5.1.1.349 | lportTrkIfInOctetsPeak | 0 | 0 | The 5-minute peak value of the number of input octets (bytes) for a trunk - from Bulk Statistics. Note that this is a 64-bit cou… |
1.3.6.1.4.1.277.1.5.1.1.350 | lportTrkIfOutOctetsPeak | 0 | 0 | The 5-minute peak value of the number of output octets (bytes) for a trunk - from Bulk Statistics. Note that this is a 64-bit co… |
1.3.6.1.4.1.277.1.5.1.1.351 | lportTrkIfInErrorsPeak | 0 | 0 | The 5-minute peak value of the number of input octets (bytes) in error for a trunk - from Bulk Statistics. Note that this is a 6… |
1.3.6.1.4.1.277.1.5.1.1.352 | lportTrkIfOutErrorsPeak | 0 | 0 | The 5-minute peak value of the number of output octets (bytes) in error for a trunk - from Bulk Statistics. Note that this is a … |
1.3.6.1.4.1.277.1.5.1.1.353 | lportFRInOctetsPeak | 0 | 0 | The 5-minute peak value of the number of input octets (bytes) for a Frame Relay UNI/NNI - from Bulk Statistics. |
1.3.6.1.4.1.277.1.5.1.1.354 | lportFROutOctetsPeak | 0 | 0 | The 5-minute peak value of the number of output octets (bytes) for a Frame Relay UNI/NNI - from Bulk Statistics. |
1.3.6.1.4.1.277.1.5.1.1.355 | lportFRInErrorsPeak | 0 | 0 | The 5-minute peak value of the number of input octets (bytes) in error for a Frame Relay UNI/NNI - from Bulk Statistics. |
1.3.6.1.4.1.277.1.5.1.1.356 | lportFROutErrorsPeak | 0 | 0 | The 5-minute peak value of the number of output octets (bytes) in error for a Frame Relay UNI/NNI - from Bulk Statistics. |
1.3.6.1.4.1.277.1.5.1.1.358 | lportEthernetTxEncapsulation | 0 | 0 | Controls the encapsulation type for transmitted IP frames out an Ethernet port. |
... |