The type of connection at this lport.
Parsed from file cascade.mib.txt
Company: cascade
Module: CASCADE-MIB
Vendor: Cascade Communications
Module: CASCADE-MIB (cascade.mib)
Type: TABULAR
Access: read-write
Syntax: INTEGER
Automatically extracted from www.mibdepot.com
lportConnectionType OBJECT-TYPE SYNTAX INTEGER { network-endsystem (1), network-network (2) } ACCESS read-write STATUS mandatory DESCRIPTION "The type of connection at this lport." ::= { lportEntry 84 }
To many brothers! Only 100 nearest brothers are shown.
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
... | ||||
1.3.6.1.4.1.277.1.5.1.1.34 | lportDataRate | 0 | 0 | An estimate of the logical port's data rate in bits per second. |
1.3.6.1.4.1.277.1.5.1.1.35 | lportTrkStatus | 0 | 0 | The current state of the trunk. The btdefined state only applies to backup trunks. |
1.3.6.1.4.1.277.1.5.1.1.36 | lportSevCongests | 0 | 0 | The cumulative number of times that the lport's congestion state has changed from mildly-congested to severely-congested since th… |
1.3.6.1.4.1.277.1.5.1.1.37 | lportAbsCongests | 0 | 0 | The cumulative number of times that the lport's congestion state has changed from severely-congested to absolutely- congested sin… |
1.3.6.1.4.1.277.1.5.1.1.38 | lportTrkOverhead | 0 | 0 | An estimate of the overhead (headers and internal control messages) in trunking user data in terms of a percentage of the configu… |
1.3.6.1.4.1.277.1.5.1.1.39 | lportTrkUtil | 0 | 0 | An estimate of the real utilization of the trunk bandwidth in terms of a percentage of the configured trunk bandwidth. |
1.3.6.1.4.1.277.1.5.1.1.40 | lportVAvailbw | 0 | 0 | Currently available virtual trunk bandwidth. |
1.3.6.1.4.1.277.1.5.1.1.41 | lportTrkLastTimeChange | 0 | 0 | The sysUpTime value when the trunk was last changed to the current status. |
1.3.6.1.4.1.277.1.5.1.1.42 | lportCongestRate | 0 | 0 | The rate (%) of entering severely or absolutely congested states in the last one minute interval. |
1.3.6.1.4.1.277.1.5.1.1.43 | lportCongestRateThresh | 0 | 0 | The alert threshold (%) for the CongestRate; trap will be sent when exceeded. |
1.3.6.1.4.1.277.1.5.1.1.44 | lportDiagState | 0 | 0 | The current state of the diagnostic on this logical port. |
1.3.6.1.4.1.277.1.5.1.1.45 | lportDiagOptionStr | 0 | 0 | Optional parameters to the diagnostic. |
1.3.6.1.4.1.277.1.5.1.1.46 | lportDiagPassCount | 0 | 0 | Number of successful diagnostic passes. |
1.3.6.1.4.1.277.1.5.1.1.47 | lportDiagFailCount | 0 | 0 | Number of failed diagnostic passes. |
1.3.6.1.4.1.277.1.5.1.1.48 | lportDiagResultStr | 0 | 0 | Description of last diagnostic failure. |
1.3.6.1.4.1.277.1.5.1.1.49 | lportDs0BitStuff | 0 | 0 | Is bit stuffing enabled on this lport? |
1.3.6.1.4.1.277.1.5.1.1.50 | lportErrorThreshold | 0 | 0 | The per minute error threshold before a link error trap is sent. |
1.3.6.1.4.1.277.1.5.1.1.51 | lportUnsyncBandwidth | 0 | 0 | The accumulated allocated/deallocated bandwidth which has not been propagated by OSPF yet. |
1.3.6.1.4.1.277.1.5.1.1.52 | lportDTEInStatusFrames | 0 | 0 | The number of LMI STATUS frames received from the DCE since the last system reset. The count includes link integrity verification… |
1.3.6.1.4.1.277.1.5.1.1.53 | lportDTEInFullStatusFrames | 0 | 0 | The number of LMI Full STATUS frames received from the DTE since the last system reset. |
1.3.6.1.4.1.277.1.5.1.1.54 | lportDTEInAsyncStatusFrames | 0 | 0 | The number of asynchronous LMI Status frames received from the DTE since the last system reset. For LMI Rev 1, these are Update S… |
1.3.6.1.4.1.277.1.5.1.1.55 | lportDTEInErrorFrames | 0 | 0 | The number of LMI frames received containing protocol errors. |
1.3.6.1.4.1.277.1.5.1.1.56 | lportDTEOutPollFrames | 0 | 0 | The number of LMI Status Enquiry frames transmitted since the last system reset. |
1.3.6.1.4.1.277.1.5.1.1.57 | lportDTEPollErrorCounts | 0 | 0 | The number of DTE in-channel signaling link reliability errors (i.e. LMI Status Enquiry frames that were not responded to, seque… |
1.3.6.1.4.1.277.1.5.1.1.58 | lportDTEFailCounts | 0 | 0 | The number of times since the last system reset LMI has declared the DTE side of the link down due to excessive errors. |
1.3.6.1.4.1.277.1.5.1.1.59 | lportDTEFailReason | 0 | 0 | The LMI failure reason. If the rate of LMI detected errors exceeds the threshold, this contains the cause of the most recent erro… |
1.3.6.1.4.1.277.1.5.1.1.60 | lportDTEOperStatus | 0 | 0 | The operational status of the DTE side of LMI on this link. |
1.3.6.1.4.1.277.1.5.1.1.61 | lportDCEInPollFrames | 0 | 0 | The number of LMI poll frames received from the DTE since the last system reset. |
1.3.6.1.4.1.277.1.5.1.1.62 | lportDCEInErrorFrames | 0 | 0 | The number of LMI frames received containing protocol errors. |
1.3.6.1.4.1.277.1.5.1.1.63 | lportDCEOutStatusFrames | 0 | 0 | The number of LMI STATUS frames transmitted since the last system reset. The count includes link integrity verification frames on… |
1.3.6.1.4.1.277.1.5.1.1.64 | lportDCEOutFullStatusFrames | 0 | 0 | The number of LMI Full STATUS frames transmitted since the last system reset. |
1.3.6.1.4.1.277.1.5.1.1.65 | lportDCEOutAsyncStatusFrames | 0 | 0 | The number of asynchronous LMI Status frames transmitted since the last system reset. For LMI Rev 1, these are Update STATUS fram… |
1.3.6.1.4.1.277.1.5.1.1.66 | lportDCEPollErrorCounts | 0 | 0 | The number of DCE in-channel signaling link reliability errors (i.e. timeouts waiting for LMI Status Enquiry frames, sequence nu… |
1.3.6.1.4.1.277.1.5.1.1.67 | lportDCEFailCounts | 0 | 0 | The number of times since the last system reset LMI has declared the DCE side of the link down due to excessive errors. |
1.3.6.1.4.1.277.1.5.1.1.68 | lportDCEFailReason | 0 | 0 | The LMI failure reason. If the rate of LMI detected errors exceeds the threshold, this contains the cause of the most recent erro… |
1.3.6.1.4.1.277.1.5.1.1.69 | lportDCEOperStatus | 0 | 0 | The operational status of the DCE side of LMI on this link. |
1.3.6.1.4.1.277.1.5.1.1.70 | lportDCEOperDlcmiStd | 0 | 0 | This variable states which Data Link Connection Management scheme is actually being run on this link. This is used for DCE links … |
1.3.6.1.4.1.277.1.5.1.1.71 | lportLMIInErrorFrames | 0 | 0 | The number of total frames received with an error. For NNI links this is the sum of lportDTEInErrorFrames and lportDCEInErrorFram… |
1.3.6.1.4.1.277.1.5.1.1.72 | lportDCEnN4 | 0 | 0 | This variable specifies the maximum number of LMI Status Enquiry frames that can be received from a DTE within time interval lpor… |
1.3.6.1.4.1.277.1.5.1.1.73 | lportDCEnT3 | 0 | 0 | This variable specifies the time interval (secs) used to determine if lportDCEnN4 an excess number (lportDCEnN4) of Status Enqui… |
1.3.6.1.4.1.277.1.5.1.1.74 | lportXmitLatencyThreshold | 0 | 0 | Outbound frames are allowed on the transmit commit queue when the commit queue falls below this threshold (in microseconds). |
1.3.6.1.4.1.277.1.5.1.1.75 | lportXmitRefillPriority0Percentage | 0 | 0 | Percentage of time the transmit queue is refilled in priority order 0, 1, 2, 3. |
1.3.6.1.4.1.277.1.5.1.1.76 | lportXmitRefillPriority1Percentage | 0 | 0 | Percentage of time the transmit queue is refilled in priority order 1, 2, 3, 0. |
1.3.6.1.4.1.277.1.5.1.1.77 | lportXmitRefillPriority2Percentage | 0 | 0 | Percentage of time the transmit queue is refilled in priority order 2, 3, 0, 1. |
1.3.6.1.4.1.277.1.5.1.1.78 | lportXmitRefillPriority3Percentage | 0 | 0 | Percentage of time the transmit queue is refilled in priority order 3, 0, 1, 2. |
1.3.6.1.4.1.277.1.5.1.1.79 | lportXmitDiscardLow, lportAbsoluteThreshold | 0 | 0 | Priority holding queue low water discard threshold. Discarding stops when holding queue hits this level. |
1.3.6.1.4.1.277.1.5.1.1.80 | lportSevereThreshold | 0 | 0 | Severe congestion level. Outbound red and amber packets are discarded when the transmit queue hits this threshold. |
1.3.6.1.4.1.277.1.5.1.1.81 | lportMildThreshold | 0 | 0 | Mild congestion level. Outbound red packets are discarded when the transmit queue hits this threshold. |
1.3.6.1.4.1.277.1.5.1.1.82 | lportAtmUPCEnable | 0 | 0 | Enable ATM UPC Function. |
1.3.6.1.4.1.277.1.5.1.1.83 | lportAtmUniType | 0 | 0 | The type of UNI for this ATM lport. |
1.3.6.1.4.1.277.1.5.1.1.85 | lportAtmCellType | 0 | 0 | atm cell header with uni-format or nni-format with no GFC. |
1.3.6.1.4.1.277.1.5.1.1.86 | lportTrkKeepAliveTimer | 0 | 0 | Send a keep-alive packet after this many seconds. These packets are sent on trunk links only. The range is 0 thru 15, with zer… |
1.3.6.1.4.1.277.1.5.1.1.87 | lportTrkKeepAliveErrorThreshold | 0 | 0 | Declare the interface down after this many keep-alive packets in a row are missed. The default is five. |
1.3.6.1.4.1.277.1.5.1.1.88 | lportIgCutThruStatus | 0 | 0 | Enable ingress cut-thru on this user lport. Default is disabled. |
1.3.6.1.4.1.277.1.5.1.1.89 | lportEgCutThruStatus | 0 | 0 | Enable egress cut-thru on this user lport. Default is disabled. |
1.3.6.1.4.1.277.1.5.1.1.90 | lportEgCutThruThresh | 0 | 0 | Egress cut thru threshold - start transmitting a frame on a user port after this many segments have arrived. |
1.3.6.1.4.1.277.1.5.1.1.91 | lportFrameRelayTrkEnable | 0 | 0 | Allow Frame Relay Trunks on the user link. |
1.3.6.1.4.1.277.1.5.1.1.92 | lportSmdsSsiIf | 0 | 0 | The interface number of the SSI which this DXI/SNI is multiplexed to. |
1.3.6.1.4.1.277.1.5.1.1.93 | lportSmdsSsiSlot | 0 | 0 | The slot of the SSI which this DXI/SNI is multiplexed to. |
1.3.6.1.4.1.277.1.5.1.1.94 | lportSmdsScrnId | 0 | 0 | The ID of address screen for this interface. |
1.3.6.1.4.1.277.1.5.1.1.95 | lportSmdsIaScrnOp | 0 | 0 | Individual address screen operation. |
1.3.6.1.4.1.277.1.5.1.1.96 | lportSmdsGaScrnOp | 0 | 0 | Group address screen operation. |
1.3.6.1.4.1.277.1.5.1.1.97 | lportSmdsIaScrnMap | 0 | 0 | The individual address screen member bit map. For set request, the first byte is the operation : 1 for deleting, 2 for adding. Th… |
1.3.6.1.4.1.277.1.5.1.1.98 | lportSmdsGaScrnMap | 0 | 0 | The group address screen member bit map. For set request, the first byte is the operation : 1 for deleting, 2 for adding. The fol… |
1.3.6.1.4.1.277.1.5.1.1.99 | lportSmdsTrkAddr | 0 | 0 | SMDS address. For SSI feeder port, this address is the local address of all SMDS optimum paths associated with this SSI feeder po… |
1.3.6.1.4.1.277.1.5.1.1.100 | lportSmdsCrc | 0 | 0 | CRC which CPE generates. |
1.3.6.1.4.1.277.1.5.1.1.101 | lportSmdsCpePoll | 0 | 0 | Whether CPE supports heart beat poll or not. |
1.3.6.1.4.1.277.1.5.1.1.102 | lportSmdsPduCheck | 0 | 0 | turn on/off the detailed SIP3 PDU error checking. |
1.3.6.1.4.1.277.1.5.1.1.103 | lportSmdsCntOutFrDxi2HbPolls | 0 | 0 | Number of DXI2 heart beat poll frames transmitted. |
1.3.6.1.4.1.277.1.5.1.1.104 | lportSmdsCntOutByteDxi2HbPolls | 0 | 0 | Total number of octets in DXI2 heart beat poll frames transmitted. |
1.3.6.1.4.1.277.1.5.1.1.105 | lportSmdsCntInFrDxi2HbPolls | 0 | 0 | Number of DXI2 heart beat poll frames received. |
1.3.6.1.4.1.277.1.5.1.1.106 | lportSmdsCntInByteDxi2HbPolls | 0 | 0 | Total number of octets in DXI2 heart beat poll frames received. |
1.3.6.1.4.1.277.1.5.1.1.107 | lportSmdsCntOutFrSip3s | 0 | 0 | Number of SIP3 frames transmitted. |
1.3.6.1.4.1.277.1.5.1.1.108 | lportSmdsCntOutByteSip3s | 0 | 0 | Total number of octets in SIP3 frames transmitted. |
1.3.6.1.4.1.277.1.5.1.1.109 | lportSmdsCntInFrSip3s | 0 | 0 | Number of SIP3 frames received. |
1.3.6.1.4.1.277.1.5.1.1.110 | lportSmdsCntInByteSip3s | 0 | 0 | Total number of octets in SIP3 frames received. |
1.3.6.1.4.1.277.1.5.1.1.111 | lportSmdsCntDxi2LinkIdInvalids | 0 | 0 | Number of instances that DXI2 link ID is invalid. |
1.3.6.1.4.1.277.1.5.1.1.112 | lportSmdsCntDxi2StationIdInvalids | 0 | 0 | Number of instances that DXI2 station ID is invalid. |
1.3.6.1.4.1.277.1.5.1.1.113 | lportSmdsCntDxi2CrInvalids | 0 | 0 | Number of instances that DXI2 command/response field is invalid. |
1.3.6.1.4.1.277.1.5.1.1.114 | lportSmdsCntDxi2AeInvalids | 0 | 0 | Number of instances that DXI2 address extension field is invalid. |
1.3.6.1.4.1.277.1.5.1.1.115 | lportSmdsCntDxi2CtrlInvalids | 0 | 0 | Number of instances that DXI2 control field is invalid. |
1.3.6.1.4.1.277.1.5.1.1.116 | lportSmdsCntDxi2FrameSizeErrors | 0 | 0 | Number of instances there is a DXI2 frame size error. |
1.3.6.1.4.1.277.1.5.1.1.117 | lportSmdsCntSip3RsvdInvalids | 0 | 0 | Number of instances that SIP3 reserved field in header is invalid. |
1.3.6.1.4.1.277.1.5.1.1.118 | lportSmdsCntSip3BetagMismatchs | 0 | 0 | Number of instances that SIP3 BE tag is not matched. |
1.3.6.1.4.1.277.1.5.1.1.119 | lportSmdsCntSip3BasizeIncorrects | 0 | 0 | Number of instances that SIP3 BA size is incorrect. |
1.3.6.1.4.1.277.1.5.1.1.120 | lportSmdsCntSip3BasizeInvalids | 0 | 0 | Number of instances that SIP3 BA size is invalid. |
1.3.6.1.4.1.277.1.5.1.1.121 | lportSmdsCntSip3DaTypeInvalids | 0 | 0 | Number of instances that SIP3 destination address type is invalid. |
1.3.6.1.4.1.277.1.5.1.1.122 | lportSmdsCntSip3DaInvalids | 0 | 0 | Number of instances that SIP3 destination address is invalid. |
1.3.6.1.4.1.277.1.5.1.1.123 | lportSmdsCntSip3SaTypeInvalids | 0 | 0 | Number of instances that SIP3 source address type is invalid. |
1.3.6.1.4.1.277.1.5.1.1.124 | lportSmdsCntSip3SaInvalids | 0 | 0 | Number of instances that SIP3 source address is invalid. |
1.3.6.1.4.1.277.1.5.1.1.125 | lportSmdsCntSip3BasizeMismatchs | 0 | 0 | Number of instances that SIP3 BA sizes in the header and trailer are not matched. |
1.3.6.1.4.1.277.1.5.1.1.126 | lportSmdsCntSip3HeLenInvalids | 0 | 0 | Number of instances that SIP3 header extension length is invalid. |
1.3.6.1.4.1.277.1.5.1.1.127 | lportSmdsCntSip3HeVersionInvalids | 0 | 0 | Number of instances that SIP3 header extension version is invalid. |
1.3.6.1.4.1.277.1.5.1.1.128 | lportSmdsCntSip3HeCarrierInvalids | 0 | 0 | Number of instances that SIP3 header extension carrier is invalid. |
1.3.6.1.4.1.277.1.5.1.1.129 | lportSmdsCntSip3Crc32Errors | 0 | 0 | Number of SIP3 CRC errors. |
1.3.6.1.4.1.277.1.5.1.1.130 | lportSmdsCntSip3TRsvdInvalids | 0 | 0 | Number of instances that SIP3 reserved field in trailer is invalid. |
1.3.6.1.4.1.277.1.5.1.1.131 | lportSmdsCntSaNotFounds | 0 | 0 | Number of instances that source address not found. |
1.3.6.1.4.1.277.1.5.1.1.132 | lportSmdsCntSaValidationFails | 0 | 0 | Number of instances that source address validation failed. |
1.3.6.1.4.1.277.1.5.1.1.133 | lportSmdsCntSaDaOnSamePorts | 0 | 0 | Number of instances that source address and destination addresses are on the same port. |
1.3.6.1.4.1.277.1.5.1.1.134 | lportSmdsCntDaSsiMismacths | 0 | 0 | Obsolete. |
... |