Change the card state from marginal to active. Change the
LED from yellow to green.
Parsed from file cascade.mib.txt
Company: None
Module: CASCADE-MIB
Change the card state from marginal to active. Change the
LED from yellow to green.
Parsed from file CASCADE-MIB.mib
Module: CASCADE-MIB
Vendor: Cascade Communications Corp.
Module: CASCADE-MIB
[Automatically extracted from oidview.com]
cardDiagLEDReset OBJECT-TYPE SYNTAX INTEGER { state-unchanged (0), state-to-active (1) } ACCESS read-write STATUS mandatory DESCRIPTION "Change the card state from marginal to active. Change the LED from yellow to green." ::= { cardEntry 29 }
cardDiagLEDReset OBJECT-TYPE SYNTAX INTEGER { state-to-active (1) } ACCESS read-write STATUS mandatory DESCRIPTION "Change the card state from marginal to active. Change the LED from yellow to green." ::= { cardEntry 29 }
To many brothers! Only 100 nearest brothers are shown.
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
... | ||||
1.3.6.1.4.1.277.1.7.2.1.1 | cardLogicalSlotId | 0 | 0 | The logical slot number of this card. This is used as an index for the cardTable. In redundant configurations, this can be the p… |
1.3.6.1.4.1.277.1.7.2.1.2 | cardPhysicalSlotId | 0 | 0 | The physical slot number of this card. This can be different from cardLogicalSlotId in redundant configurations. |
1.3.6.1.4.1.277.1.7.2.1.3 | cardAdminType | 0 | 0 | The desired card type. |
1.3.6.1.4.1.277.1.7.2.1.4 | cardOperType | 0 | 0 | The actual card type. |
1.3.6.1.4.1.277.1.7.2.1.5 | cardState | 0 | 0 | The state of this card. |
1.3.6.1.4.1.277.1.7.2.1.6 | cardAdminStatus | 0 | 0 | The desired status of this card. |
1.3.6.1.4.1.277.1.7.2.1.7 | cardOperStatus | 0 | 0 | The current status of this card. |
1.3.6.1.4.1.277.1.7.2.1.8 | cardDiagStatus | 0 | 0 | The current diagnostics status of this card, as determined by background diagnostics. |
1.3.6.1.4.1.277.1.7.2.1.9 | cardRedundConfig | 0 | 0 | Is the card configured for redundancy? |
1.3.6.1.4.1.277.1.7.2.1.10 | cardRedundSlotMask | 0 | 0 | A 32-bit mask indicating the slot position of this card and its redundant partner. The low bit is slot 1 and the high bit is slo… |
1.3.6.1.4.1.277.1.7.2.1.11 | cardRedundActual | 0 | 0 | Is the card currently connected to a redundant card? |
1.3.6.1.4.1.277.1.7.2.1.12 | cardRedundState | 0 | 0 | The current redundancy state of this card. Exception: when used as an index for the following objects: cardAdminType, cardAdminC… |
1.3.6.1.4.1.277.1.7.2.1.13 | cardToRedundant | 0 | 0 | Instructs the standby card to reset the active card and take over as new active card. The reset takes place after specified time… |
1.3.6.1.4.1.277.1.7.2.1.14 | cardDiagNonFatalSource | 0 | 0 | Source who reported last non-fatal error. |
1.3.6.1.4.1.277.1.7.2.1.15 | cardDiagNonFatalTime | 0 | 0 | Time the last non-fatal error was reported. |
1.3.6.1.4.1.277.1.7.2.1.16 | cardDiagNonFatalErrMajor | 0 | 0 | Major error code of last non-fatal error. |
1.3.6.1.4.1.277.1.7.2.1.17 | cardDiagNonFatalErrMinor | 0 | 0 | Minor error code of last non-fatal error. |
1.3.6.1.4.1.277.1.7.2.1.18 | cardDiagNonFatalStr | 0 | 0 | Ascii string describing last non-fatal error. |
1.3.6.1.4.1.277.1.7.2.1.19 | cardDiagFatalSource | 0 | 0 | Source who reported last fatal error. |
1.3.6.1.4.1.277.1.7.2.1.20 | cardDiagFatalTime | 0 | 0 | Time the last fatal error was reported. |
1.3.6.1.4.1.277.1.7.2.1.21 | cardDiagFatalErrMajor | 0 | 0 | Major error code of last fatal error. |
1.3.6.1.4.1.277.1.7.2.1.22 | cardDiagFatalErrMinor | 0 | 0 | Minor error code of last fatal error. |
1.3.6.1.4.1.277.1.7.2.1.23 | cardDiagFatalStr | 0 | 0 | Ascii string describing last fatal error. |
1.3.6.1.4.1.277.1.7.2.1.24 | cardDiagFatalReboots | 0 | 0 | Number of times the switch has re-booted since last fatal error was reported. |
1.3.6.1.4.1.277.1.7.2.1.25 | cardDiagFatalAddress | 0 | 0 | Address switch was executing when it encountered fatal error. |
1.3.6.1.4.1.277.1.7.2.1.26 | cardDiagBackgroundPasses | 0 | 0 | Number of passes made by the background diagnostics. |
1.3.6.1.4.1.277.1.7.2.1.27 | cardDiagBackgroundFailures | 0 | 0 | Number of failures discovered by background diagnostics. |
1.3.6.1.4.1.277.1.7.2.1.28 | cardDiagBackgroundSuccesses | 0 | 0 | Number of successful passes by background diagnostics. |
1.3.6.1.4.1.277.1.7.2.1.30 | cardDiagPowerExtensive | 0 | 0 | Should power on diagnostics do slower, extensive testing, or fast testing? |
1.3.6.1.4.1.277.1.7.2.1.31 | cardCpuUtil | 0 | 0 | The CPU utilization percentage for packet processing on this intelligent card. |
1.3.6.1.4.1.277.1.7.2.1.32 | cardMemoryUsage | 0 | 0 | The memory utilization, in terms of free bytes, for this intelligent card. |
1.3.6.1.4.1.277.1.7.2.1.33 | cardMaxVCs | 0 | 0 | The number of available VC entries on this card. |
1.3.6.1.4.1.277.1.7.2.1.34 | cardInUseVCs | 0 | 0 | The number of currently in use VC entries on this card. |
1.3.6.1.4.1.277.1.7.2.1.35 | cardFreeVCs | 0 | 0 | The number of currently free VC entries on this card. |
1.3.6.1.4.1.277.1.7.2.1.36 | cardInOctets | 0 | 0 | The total number of octets received on this card, including framing bytes. |
1.3.6.1.4.1.277.1.7.2.1.37 | cardInPkts | 0 | 0 | The total number of packets received on this card. |
1.3.6.1.4.1.277.1.7.2.1.38 | cardOutOctets | 0 | 0 | The total number of octets transmitted out of this card, including framing bytes. |
1.3.6.1.4.1.277.1.7.2.1.39 | cardOutPkts | 0 | 0 | The total number of packets requested to be transmitted out of this card, including those that were discarded or not sent. |
1.3.6.1.4.1.277.1.7.2.1.40 | cardToWarmboot | 0 | 0 | Warm boots the card after the specified time ticks have elapsed. A value of 0 indicates cancellation of the previously scheduled … |
1.3.6.1.4.1.277.1.7.2.1.41 | cardToColdboot | 0 | 0 | Cold boots the card after the specified time ticks have elapsed. A value of 0 indicates cancellation of the previously scheduled … |
1.3.6.1.4.1.277.1.7.2.1.42 | cardModel | 0 | 0 | The part number of the card. |
1.3.6.1.4.1.277.1.7.2.1.43 | cardSerial | 0 | 0 | The serial number of the card. |
1.3.6.1.4.1.277.1.7.2.1.44 | cardSwRev | 0 | 0 | The software rev number (major.minor). |
1.3.6.1.4.1.277.1.7.2.1.45 | cardHwRev | 0 | 0 | The hardware rev number (major.minor). |
1.3.6.1.4.1.277.1.7.2.1.46 | cardEpromRev | 0 | 0 | The EPROM firmware rev number (major.minor). |
1.3.6.1.4.1.277.1.7.2.1.47 | cardName | 0 | 0 | The name of this card |
1.3.6.1.4.1.277.1.7.2.1.48 | cardCktGroupTrap | 0 | 0 | This is a ( 4 + n*134 ) byte octet string where n => 1. The first and second byte is the interface/slot id of the link/IOP going … |
1.3.6.1.4.1.277.1.7.2.1.49 | cardOutBtus | 0 | 0 | The number of bus transfer units sent by this card. |
1.3.6.1.4.1.277.1.7.2.1.50 | cardInGoodBtus | 0 | 0 | The number of good bus transfer units received by this card. |
1.3.6.1.4.1.277.1.7.2.1.51 | cardInErrorBtus | 0 | 0 | The number of bus transfer units received with errors. |
1.3.6.1.4.1.277.1.7.2.1.52 | cardInNoVcBtus | 0 | 0 | The number of bus transfer units discarded because no circuit was found. |
1.3.6.1.4.1.277.1.7.2.1.53 | cardInLinkDownBtus | 0 | 0 | The number of bus transfer units discarded because the outgoing link was inactive. |
1.3.6.1.4.1.277.1.7.2.1.54 | cardInNoBufferBtus | 0 | 0 | The number of bus transfer units discarded because no buffer was available. |
1.3.6.1.4.1.277.1.7.2.1.55 | cardInForwardBitBtus | 0 | 0 | The number of bus transfer units discarded because the circuit forward bit was off. |
1.3.6.1.4.1.277.1.7.2.1.56 | cardDiagTestId | 0 | 0 | Identification of the diagnostics tests to be run. |
1.3.6.1.4.1.277.1.7.2.1.57 | cardDiagTestRuns | 0 | 0 | The number of passes of the diagnostics tests to be run. The default value is 1. |
1.3.6.1.4.1.277.1.7.2.1.58 | cardDiagState | 0 | 0 | The current state of the foreground diagnostics on this card. |
1.3.6.1.4.1.277.1.7.2.1.59 | cardDiagOptionStr | 0 | 0 | Optional parameters to the diagnostic. |
1.3.6.1.4.1.277.1.7.2.1.60 | cardDiagPasses | 0 | 0 | Number of successful diagnostic passes. |
1.3.6.1.4.1.277.1.7.2.1.61 | cardDiagFailures | 0 | 0 | Number of failed diagnostic passes. |
1.3.6.1.4.1.277.1.7.2.1.62 | cardDiagResultString | 0 | 0 | Description of last diagnostic failure. |
1.3.6.1.4.1.277.1.7.2.1.63 | cardFrameMemoryUtil | 0 | 0 | The percentage of frame memory utilization on this intelligent card. |
1.3.6.1.4.1.277.1.7.2.1.64 | cardResetPram | 0 | 0 | Setting this to 1 causes a reset of PRAM on the corresponding card. |
1.3.6.1.4.1.277.1.7.2.1.65 | cardMemoryUtil | 0 | 0 | The percentage of system memory utilization on this intelligent card. |
1.3.6.1.4.1.277.1.7.2.1.66 | cardFrameMemoryUsage | 0 | 0 | The frame memory utilization, in terms of free bytes, for this intelligent card. |
1.3.6.1.4.1.277.1.7.2.1.67 | cardUpTime | 0 | 0 | The time (in hundredths of a second) since this card was last booted. |
1.3.6.1.4.1.277.1.7.2.1.68 | cardPramChecksum | 0 | 0 | The PRAM checksum for this card. |
1.3.6.1.4.1.277.1.7.2.1.69 | cardPhysicalIndex | 0 | 0 | The physical slot id of this card. |
1.3.6.1.4.1.277.1.7.2.1.70 | cardExternalClockRate | 0 | 0 | The external clock rate for DSX1, T1 and E1 cards. The value is specified in units of 8KHz and can range from 1 to 255. |
1.3.6.1.4.1.277.1.7.2.1.71 | cardShootState | 0 | 0 | Specifies whether the system monitor on the CP should shoot this card if it's unreachable. The default is enabled. The card index… |
1.3.6.1.4.1.277.1.7.2.1.72 | cardEraseAll | 0 | 0 | When set to 1, erases program flash and PRAM on specified card. |
1.3.6.1.4.1.277.1.7.2.1.73 | cardAdminCapability | 0 | 0 | The desired capability of the card |
1.3.6.1.4.1.277.1.7.2.1.74 | cardOperCapability | 0 | 0 | The actual capability of the card |
1.3.6.1.4.1.277.1.7.2.1.75 | cardISDNswtype | 0 | 0 | Specifies the ISDN central office switch type for the card. |
1.3.6.1.4.1.277.1.7.2.1.76 | cardCpuFgUtil | 0 | 0 | The CPU foreground utilization percentage for packet processing on this intelligent card. |
1.3.6.1.4.1.277.1.7.2.1.77 | cardTrkProtState | 0 | 0 | Control for issue of Link Trunk Protocol request frames. If set to disabled, the issue of trunk protocol requests is blocked for… |
1.3.6.1.4.1.277.1.7.2.1.78 | cardISDNSigType | 0 | 0 | Specifies whether the ISDN Signalling type is Associated or Non-Facility Associated Signalling |
1.3.6.1.4.1.277.1.7.2.1.79 | cardISDNChanId | 0 | 0 | Specifies whether Channel ID assignment is performed by the central office switch or the 9000 - Exclusive (central office) Prefer… |
... |