Control for issue of Link Trunk Protocol request frames. If
set to disabled, the issue of trunk protocol requests is
blocked for all trunks on this card.
Parsed from file cascade.mib.txt
Company: None
Module: CASCADE-MIB
Control for issue of Link Trunk Protocol request frames. If
set to disabled, the issue of trunk protocol requests is
blocked for all trunks on this card.
Parsed from file CASCADE-MIB.mib
Module: CASCADE-MIB
Vendor: Cascade Communications Corp.
Module: CASCADE-MIB
[Automatically extracted from oidview.com]
cardTrkProtState OBJECT-TYPE SYNTAX INTEGER { enabled (1), disabled (2) } ACCESS read-write STATUS mandatory DESCRIPTION "Control for issue of Link Trunk Protocol request frames. If set to disabled, the issue of trunk protocol requests is blocked for all trunks on this card." ::= { cardEntry 77 }
cardTrkProtState OBJECT-TYPE SYNTAX INTEGER { enabled (1), disabled (2) } ACCESS read-write STATUS mandatory DESCRIPTION "Control for issue of Link Trunk Protocol request frames. If set to disabled, the issue of trunk protocol requests is blocked for all trunks on this card." ::= { cardEntry 77 }
To many brothers! Only 100 nearest brothers are shown.
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| ... | ||||
| 1.3.6.1.4.1.277.1.7.2.1.27 | cardDiagBackgroundFailures | 0 | 0 | Number of failures discovered by background diagnostics. |
| 1.3.6.1.4.1.277.1.7.2.1.28 | cardDiagBackgroundSuccesses | 0 | 0 | Number of successful passes by background diagnostics. |
| 1.3.6.1.4.1.277.1.7.2.1.29 | cardDiagLEDReset | 0 | 0 | Change the card state from marginal to active. Change the LED from yellow to green. |
| 1.3.6.1.4.1.277.1.7.2.1.30 | cardDiagPowerExtensive | 0 | 0 | Should power on diagnostics do slower, extensive testing, or fast testing? |
| 1.3.6.1.4.1.277.1.7.2.1.31 | cardCpuUtil | 0 | 0 | The CPU utilization percentage for packet processing on this intelligent card. |
| 1.3.6.1.4.1.277.1.7.2.1.32 | cardMemoryUsage | 0 | 0 | The memory utilization, in terms of free bytes, for this intelligent card. |
| 1.3.6.1.4.1.277.1.7.2.1.33 | cardMaxVCs | 0 | 0 | The number of available VC entries on this card. |
| 1.3.6.1.4.1.277.1.7.2.1.34 | cardInUseVCs | 0 | 0 | The number of currently in use VC entries on this card. |
| 1.3.6.1.4.1.277.1.7.2.1.35 | cardFreeVCs | 0 | 0 | The number of currently free VC entries on this card. |
| 1.3.6.1.4.1.277.1.7.2.1.36 | cardInOctets | 0 | 0 | The total number of octets received on this card, including framing bytes. |
| 1.3.6.1.4.1.277.1.7.2.1.37 | cardInPkts | 0 | 0 | The total number of packets received on this card. |
| 1.3.6.1.4.1.277.1.7.2.1.38 | cardOutOctets | 0 | 0 | The total number of octets transmitted out of this card, including framing bytes. |
| 1.3.6.1.4.1.277.1.7.2.1.39 | cardOutPkts | 0 | 0 | The total number of packets requested to be transmitted out of this card, including those that were discarded or not sent. |
| 1.3.6.1.4.1.277.1.7.2.1.40 | cardToWarmboot | 0 | 0 | Warm boots the card after the specified time ticks have elapsed. A value of 0 indicates cancellation of the previously scheduled … |
| 1.3.6.1.4.1.277.1.7.2.1.41 | cardToColdboot | 0 | 0 | Cold boots the card after the specified time ticks have elapsed. A value of 0 indicates cancellation of the previously scheduled … |
| 1.3.6.1.4.1.277.1.7.2.1.42 | cardModel | 0 | 0 | The part number of the card. |
| 1.3.6.1.4.1.277.1.7.2.1.43 | cardSerial | 0 | 0 | The serial number of the card. |
| 1.3.6.1.4.1.277.1.7.2.1.44 | cardSwRev | 0 | 0 | The software rev number (major.minor). |
| 1.3.6.1.4.1.277.1.7.2.1.45 | cardHwRev | 0 | 0 | The hardware rev number (major.minor). |
| 1.3.6.1.4.1.277.1.7.2.1.46 | cardEpromRev | 0 | 0 | The EPROM firmware rev number (major.minor). |
| 1.3.6.1.4.1.277.1.7.2.1.47 | cardName | 0 | 0 | The name of this card |
| 1.3.6.1.4.1.277.1.7.2.1.48 | cardCktGroupTrap | 0 | 0 | This is a ( 4 + n*134 ) byte octet string where n => 1. The first and second byte is the interface/slot id of the link/IOP going … |
| 1.3.6.1.4.1.277.1.7.2.1.49 | cardOutBtus | 0 | 0 | The number of bus transfer units sent by this card. |
| 1.3.6.1.4.1.277.1.7.2.1.50 | cardInGoodBtus | 0 | 0 | The number of good bus transfer units received by this card. |
| 1.3.6.1.4.1.277.1.7.2.1.51 | cardInErrorBtus | 0 | 0 | The number of bus transfer units received with errors. |
| 1.3.6.1.4.1.277.1.7.2.1.52 | cardInNoVcBtus | 0 | 0 | The number of bus transfer units discarded because no circuit was found. |
| 1.3.6.1.4.1.277.1.7.2.1.53 | cardInLinkDownBtus | 0 | 0 | The number of bus transfer units discarded because the outgoing link was inactive. |
| 1.3.6.1.4.1.277.1.7.2.1.54 | cardInNoBufferBtus | 0 | 0 | The number of bus transfer units discarded because no buffer was available. |
| 1.3.6.1.4.1.277.1.7.2.1.55 | cardInForwardBitBtus | 0 | 0 | The number of bus transfer units discarded because the circuit forward bit was off. |
| 1.3.6.1.4.1.277.1.7.2.1.56 | cardDiagTestId | 0 | 0 | Identification of the diagnostics tests to be run. |
| 1.3.6.1.4.1.277.1.7.2.1.57 | cardDiagTestRuns | 0 | 0 | The number of passes of the diagnostics tests to be run. The default value is 1. |
| 1.3.6.1.4.1.277.1.7.2.1.58 | cardDiagState | 0 | 0 | The current state of the foreground diagnostics on this card. |
| 1.3.6.1.4.1.277.1.7.2.1.59 | cardDiagOptionStr | 0 | 0 | Optional parameters to the diagnostic. |
| 1.3.6.1.4.1.277.1.7.2.1.60 | cardDiagPasses | 0 | 0 | Number of successful diagnostic passes. |
| 1.3.6.1.4.1.277.1.7.2.1.61 | cardDiagFailures | 0 | 0 | Number of failed diagnostic passes. |
| 1.3.6.1.4.1.277.1.7.2.1.62 | cardDiagResultString | 0 | 0 | Description of last diagnostic failure. |
| 1.3.6.1.4.1.277.1.7.2.1.63 | cardFrameMemoryUtil | 0 | 0 | The percentage of frame memory utilization on this intelligent card. |
| 1.3.6.1.4.1.277.1.7.2.1.64 | cardResetPram | 0 | 0 | Setting this to 1 causes a reset of PRAM on the corresponding card. |
| 1.3.6.1.4.1.277.1.7.2.1.65 | cardMemoryUtil | 0 | 0 | The percentage of system memory utilization on this intelligent card. |
| 1.3.6.1.4.1.277.1.7.2.1.66 | cardFrameMemoryUsage | 0 | 0 | The frame memory utilization, in terms of free bytes, for this intelligent card. |
| 1.3.6.1.4.1.277.1.7.2.1.67 | cardUpTime | 0 | 0 | The time (in hundredths of a second) since this card was last booted. |
| 1.3.6.1.4.1.277.1.7.2.1.68 | cardPramChecksum | 0 | 0 | The PRAM checksum for this card. |
| 1.3.6.1.4.1.277.1.7.2.1.69 | cardPhysicalIndex | 0 | 0 | The physical slot id of this card. |
| 1.3.6.1.4.1.277.1.7.2.1.70 | cardExternalClockRate | 0 | 0 | The external clock rate for DSX1, T1 and E1 cards. The value is specified in units of 8KHz and can range from 1 to 255. |
| 1.3.6.1.4.1.277.1.7.2.1.71 | cardShootState | 0 | 0 | Specifies whether the system monitor on the CP should shoot this card if it's unreachable. The default is enabled. The card index… |
| 1.3.6.1.4.1.277.1.7.2.1.72 | cardEraseAll | 0 | 0 | When set to 1, erases program flash and PRAM on specified card. |
| 1.3.6.1.4.1.277.1.7.2.1.73 | cardAdminCapability | 0 | 0 | The desired capability of the card |
| 1.3.6.1.4.1.277.1.7.2.1.74 | cardOperCapability | 0 | 0 | The actual capability of the card |
| 1.3.6.1.4.1.277.1.7.2.1.75 | cardISDNswtype | 0 | 0 | Specifies the ISDN central office switch type for the card. |
| 1.3.6.1.4.1.277.1.7.2.1.76 | cardCpuFgUtil | 0 | 0 | The CPU foreground utilization percentage for packet processing on this intelligent card. |
| 1.3.6.1.4.1.277.1.7.2.1.78 | cardISDNSigType | 0 | 0 | Specifies whether the ISDN Signalling type is Associated or Non-Facility Associated Signalling |
| 1.3.6.1.4.1.277.1.7.2.1.79 | cardISDNChanId | 0 | 0 | Specifies whether Channel ID assignment is performed by the central office switch or the 9000 - Exclusive (central office) Prefer… |
| 1.3.6.1.4.1.277.1.7.2.1.80 | cardTransmitClockConfig | 0 | 0 | The transmit clock source for timing section of the card |
| 1.3.6.1.4.1.277.1.7.2.1.81 | cardTransmitClockSwitchOver | 0 | 0 | Enable/disable automatic transmit clock source switch-over once a failed clock reference has recovered. |
| 1.3.6.1.4.1.277.1.7.2.1.82 | cardTransmitClockStatus | 0 | 0 | The transmit clock PLL synchronization status of the card |
| 1.3.6.1.4.1.277.1.7.2.1.83 | cardSystemPrimaryClockPortConfig | 0 | 0 | The port number (1-x) on the card that specifies the system primary clock source. A zero specifies no port |
| 1.3.6.1.4.1.277.1.7.2.1.84 | cardSystemPrimaryClockStatus | 0 | 0 | The system primary clock status as detected on the card. |
| 1.3.6.1.4.1.277.1.7.2.1.85 | cardSystemSecondaryClockPortConfig | 0 | 0 | The port number (1 to x) on the card that specifies the system secondary clock source. A zero specifies no port |
| 1.3.6.1.4.1.277.1.7.2.1.86 | cardSystemSecondaryClockStatus | 0 | 0 | The system secondary clock status as detected on the card. |
| 1.3.6.1.4.1.277.1.7.2.1.87 | cardInCells | 0 | 0 | The total number of cells received on this card. |
| 1.3.6.1.4.1.277.1.7.2.1.88 | cardInErrorCells | 0 | 0 | The total number of cells received on this card with HEC error. |
| 1.3.6.1.4.1.277.1.7.2.1.89 | cardInErrorVPIVCI | 0 | 0 | The total number of cells received with HEC invalid VPI, VCI. |
| 1.3.6.1.4.1.277.1.7.2.1.90 | cardOutCells | 0 | 0 | The total number of cells transmitted out of this card |
| 1.3.6.1.4.1.277.1.7.2.1.91 | cardOutDiscardCells | 0 | 0 | The total number of cells discarded due to congestion on this card |
| 1.3.6.1.4.1.277.1.7.2.1.92 | cardQOSQueueSize | 0 | 0 | The ATM QOS queue size (per cell) of each port on the card |
| 1.3.6.1.4.1.277.1.7.2.1.93 | cardLastErrorPort | 0 | 0 | The port number (1 to x) of the last cell with invalid cell header on the card |
| 1.3.6.1.4.1.277.1.7.2.1.94 | cardLastErrorVPI | 0 | 0 | The VPI of the last cell with invalid cell header on the card |
| 1.3.6.1.4.1.277.1.7.2.1.95 | cardLastErrorVCI | 0 | 0 | The VCI of the last cell with invalid cell header on the card |
| 1.3.6.1.4.1.277.1.7.2.1.96 | cardSystemPrimaryClockModeConfig | 0 | 0 | The system primary clock mode. PLCP is for DS3 port only |
| 1.3.6.1.4.1.277.1.7.2.1.97 | cardSystemSecondaryClockModeConfig | 0 | 0 | The system secondary clock mode. PLCP is for DS3 port only |
| 1.3.6.1.4.1.277.1.7.2.1.98 | cardNFBDEStatus | 0 | 0 | Non Fatal Background Diagnostic Error Status |
| 1.3.6.1.4.1.277.1.7.2.1.99 | cardProductCode | 0 | 0 | This card's product code. |
| 1.3.6.1.4.1.277.1.7.2.1.100 | cardMfgPN | 0 | 0 | This card's manufacturing part number. |
| 1.3.6.1.4.1.277.1.7.2.1.101 | cardTotalUpTime | 0 | 0 | This card's total accumulated up time, in hours. |
| 1.3.6.1.4.1.277.1.7.2.1.102 | cardIOAType | 0 | 0 | The type of IOA attached to this card. |
| 1.3.6.1.4.1.277.1.7.2.1.103 | cardIOAHwRev | 0 | 0 | The attached IOA's hardware revision. |
| 1.3.6.1.4.1.277.1.7.2.1.104 | cardIOASerial | 0 | 0 | The attached IOA's serial number. |
| 1.3.6.1.4.1.277.1.7.2.1.105 | cardIOAProductCode | 0 | 0 | The attached IOA's product code. |
| 1.3.6.1.4.1.277.1.7.2.1.106 | cardIOAMfgPN | 0 | 0 | The attached IOA's manufacturing part number. |
| 1.3.6.1.4.1.277.1.7.2.1.107 | cardDS0Support | 0 | 0 | Some B-Stdx T1 boards do not support lpbk. |
| 1.3.6.1.4.1.277.1.7.2.1.108 | cardDiagParamId | 0 | 0 | Parameter identifier for internal diagnostics. |
| 1.3.6.1.4.1.277.1.7.2.1.109 | cardDiagParamValue | 0 | 0 | Value assigned to parameter specified by cardDiagParamId. |
| 1.3.6.1.4.1.277.1.7.2.1.110 | cardBulkStatsPeakCapability | 0 | 0 | Configures capability to collect peak 5-minute statistics. Capability change takes effect upon IOM reboot. |
| 1.3.6.1.4.1.277.1.7.2.1.111 | cardBulkStatsTotalCapability | 0 | 0 | Configures capability to collect total statistics. Capability change takes effect upon IOM reboot. |
| 1.3.6.1.4.1.277.1.7.2.1.112 | cardBulkStatsPeakEnable | 0 | 0 | Reflects the operational state of the peak 5-minute statistic collection on an IOM. For this setting to be enabled, the respectiv… |
| 1.3.6.1.4.1.277.1.7.2.1.113 | cardBulkStatsTotalEnable | 0 | 0 | Reflects the operational state of the total statistic collection on an IOM. For this setting to be enabled, the respective capabi… |
| 1.3.6.1.4.1.277.1.7.2.1.114 | cardBulkStatsBaseCollectPeriod | 0 | 0 | Configures base collection period for bulk statistics on an IOM in minutes. Only the following values are allowed: 15, 20, 30, 60… |
| 1.3.6.1.4.1.277.1.7.2.1.115 | cardNrtsHwRev | 0 | 0 | Hardware revision of the NRTS processor. |
| 1.3.6.1.4.1.277.1.7.2.1.116 | cardNrtsOutCellBufSize | 0 | 0 | The size of the NRTS output cell buffer. |
| 1.3.6.1.4.1.277.1.7.2.1.117 | cardNrtsOperState | 0 | 0 | The operational status of the NRTS processor. |
| 1.3.6.1.4.1.277.1.7.2.1.118 | cardNrtsAdminState | 0 | 0 | The admin status of the NRTS processor. |
| 1.3.6.1.4.1.277.1.7.2.1.119 | cardNrtsCcrmProtocolId | 0 | 0 | The protocol ID field for the CCRM cells. Must be different from the BCM protocol ID. Default is 6. |
| 1.3.6.1.4.1.277.1.7.2.1.120 | cardNrtsBcmProtocolId | 0 | 0 | The protocol ID field for the BCM cells. Must be different from the CCRM protocol ID. Default is 5. |
| 1.3.6.1.4.1.277.1.7.2.1.121 | cardNrtsRmGenInterval | 0 | 0 | The RM cell generation interval in ms. Minimum is 30, maximum is 250, default is 100. |
| 1.3.6.1.4.1.277.1.7.2.1.122 | cardNrtsIdleCktThresh | 0 | 0 | The number of RM cell generation intervals with no cell reception upon which the circuit is declared idle. Minimum is 1, maximum … |
| 1.3.6.1.4.1.277.1.7.2.1.123 | cardNrtsVbrNrtManage | 0 | 0 | Indicates whether VBR NRT traffic should be managed by the NRTS processor. |
| 1.3.6.1.4.1.277.1.7.2.1.124 | cardNrtsIcrFact | 0 | 0 | A factor used to calculate the Initial Cell Rate for a circuit from its MCR and PCR. |
| 1.3.6.1.4.1.277.1.7.2.1.125 | cardNrtsMcastDiscardThresh | 0 | 0 | A NRTS discard threshold for the multicast circuits. |
| 1.3.6.1.4.1.277.1.7.2.1.126 | cardNrtsMcastDiscardCount | 0 | 0 | A NRTS discard counter for the multicast circuits. |
| 1.3.6.1.4.1.277.1.7.2.1.127 | cardAdminIOAType | 0 | 0 | The type of IOA attached to this card viewed from NMS. |
| ... | ||||