The actual capability of the card
Parsed from file cascade.mib.txt
Company: None
Module: CASCADE-MIB
The actual capability of the card
Parsed from file CASCADE-MIB.mib
Module: CASCADE-MIB
Vendor: Cascade Communications Corp.
Module: CASCADE-MIB
[Automatically extracted from oidview.com]
cardOperCapability OBJECT-TYPE SYNTAX INTEGER { iop-frame-relay (1), iop-multi-service (2), iop-16meg-service (3), cp-basic (4), cp-30 (5), cp-plus (8), cp-40 (9), cp-50 (10), iom-fcp (11), sp-30 (12), sp-40 (13) } ACCESS read-only STATUS mandatory DESCRIPTION "The actual capability of the card" ::= { cardEntry 74 }
cardOperCapability OBJECT-TYPE SYNTAX INTEGER { iop-frame-relay (1), iop-multi-service (2), iop-16meg-service (3), cp-basic (4), cp-30 (5), cp-plus (8), cp-40 (9), cp-50 (10), iom-fcp (11) } ACCESS read-only STATUS mandatory DESCRIPTION "The actual capability of the card" ::= { cardEntry 74 }
To many brothers! Only 100 nearest brothers are shown.
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| ... | ||||
| 1.3.6.1.4.1.277.1.7.2.1.24 | cardDiagFatalReboots | 0 | 0 | Number of times the switch has re-booted since last fatal error was reported. |
| 1.3.6.1.4.1.277.1.7.2.1.25 | cardDiagFatalAddress | 0 | 0 | Address switch was executing when it encountered fatal error. |
| 1.3.6.1.4.1.277.1.7.2.1.26 | cardDiagBackgroundPasses | 0 | 0 | Number of passes made by the background diagnostics. |
| 1.3.6.1.4.1.277.1.7.2.1.27 | cardDiagBackgroundFailures | 0 | 0 | Number of failures discovered by background diagnostics. |
| 1.3.6.1.4.1.277.1.7.2.1.28 | cardDiagBackgroundSuccesses | 0 | 0 | Number of successful passes by background diagnostics. |
| 1.3.6.1.4.1.277.1.7.2.1.29 | cardDiagLEDReset | 0 | 0 | Change the card state from marginal to active. Change the LED from yellow to green. |
| 1.3.6.1.4.1.277.1.7.2.1.30 | cardDiagPowerExtensive | 0 | 0 | Should power on diagnostics do slower, extensive testing, or fast testing? |
| 1.3.6.1.4.1.277.1.7.2.1.31 | cardCpuUtil | 0 | 0 | The CPU utilization percentage for packet processing on this intelligent card. |
| 1.3.6.1.4.1.277.1.7.2.1.32 | cardMemoryUsage | 0 | 0 | The memory utilization, in terms of free bytes, for this intelligent card. |
| 1.3.6.1.4.1.277.1.7.2.1.33 | cardMaxVCs | 0 | 0 | The number of available VC entries on this card. |
| 1.3.6.1.4.1.277.1.7.2.1.34 | cardInUseVCs | 0 | 0 | The number of currently in use VC entries on this card. |
| 1.3.6.1.4.1.277.1.7.2.1.35 | cardFreeVCs | 0 | 0 | The number of currently free VC entries on this card. |
| 1.3.6.1.4.1.277.1.7.2.1.36 | cardInOctets | 0 | 0 | The total number of octets received on this card, including framing bytes. |
| 1.3.6.1.4.1.277.1.7.2.1.37 | cardInPkts | 0 | 0 | The total number of packets received on this card. |
| 1.3.6.1.4.1.277.1.7.2.1.38 | cardOutOctets | 0 | 0 | The total number of octets transmitted out of this card, including framing bytes. |
| 1.3.6.1.4.1.277.1.7.2.1.39 | cardOutPkts | 0 | 0 | The total number of packets requested to be transmitted out of this card, including those that were discarded or not sent. |
| 1.3.6.1.4.1.277.1.7.2.1.40 | cardToWarmboot | 0 | 0 | Warm boots the card after the specified time ticks have elapsed. A value of 0 indicates cancellation of the previously scheduled … |
| 1.3.6.1.4.1.277.1.7.2.1.41 | cardToColdboot | 0 | 0 | Cold boots the card after the specified time ticks have elapsed. A value of 0 indicates cancellation of the previously scheduled … |
| 1.3.6.1.4.1.277.1.7.2.1.42 | cardModel | 0 | 0 | The part number of the card. |
| 1.3.6.1.4.1.277.1.7.2.1.43 | cardSerial | 0 | 0 | The serial number of the card. |
| 1.3.6.1.4.1.277.1.7.2.1.44 | cardSwRev | 0 | 0 | The software rev number (major.minor). |
| 1.3.6.1.4.1.277.1.7.2.1.45 | cardHwRev | 0 | 0 | The hardware rev number (major.minor). |
| 1.3.6.1.4.1.277.1.7.2.1.46 | cardEpromRev | 0 | 0 | The EPROM firmware rev number (major.minor). |
| 1.3.6.1.4.1.277.1.7.2.1.47 | cardName | 0 | 0 | The name of this card |
| 1.3.6.1.4.1.277.1.7.2.1.48 | cardCktGroupTrap | 0 | 0 | This is a ( 4 + n*134 ) byte octet string where n => 1. The first and second byte is the interface/slot id of the link/IOP going … |
| 1.3.6.1.4.1.277.1.7.2.1.49 | cardOutBtus | 0 | 0 | The number of bus transfer units sent by this card. |
| 1.3.6.1.4.1.277.1.7.2.1.50 | cardInGoodBtus | 0 | 0 | The number of good bus transfer units received by this card. |
| 1.3.6.1.4.1.277.1.7.2.1.51 | cardInErrorBtus | 0 | 0 | The number of bus transfer units received with errors. |
| 1.3.6.1.4.1.277.1.7.2.1.52 | cardInNoVcBtus | 0 | 0 | The number of bus transfer units discarded because no circuit was found. |
| 1.3.6.1.4.1.277.1.7.2.1.53 | cardInLinkDownBtus | 0 | 0 | The number of bus transfer units discarded because the outgoing link was inactive. |
| 1.3.6.1.4.1.277.1.7.2.1.54 | cardInNoBufferBtus | 0 | 0 | The number of bus transfer units discarded because no buffer was available. |
| 1.3.6.1.4.1.277.1.7.2.1.55 | cardInForwardBitBtus | 0 | 0 | The number of bus transfer units discarded because the circuit forward bit was off. |
| 1.3.6.1.4.1.277.1.7.2.1.56 | cardDiagTestId | 0 | 0 | Identification of the diagnostics tests to be run. |
| 1.3.6.1.4.1.277.1.7.2.1.57 | cardDiagTestRuns | 0 | 0 | The number of passes of the diagnostics tests to be run. The default value is 1. |
| 1.3.6.1.4.1.277.1.7.2.1.58 | cardDiagState | 0 | 0 | The current state of the foreground diagnostics on this card. |
| 1.3.6.1.4.1.277.1.7.2.1.59 | cardDiagOptionStr | 0 | 0 | Optional parameters to the diagnostic. |
| 1.3.6.1.4.1.277.1.7.2.1.60 | cardDiagPasses | 0 | 0 | Number of successful diagnostic passes. |
| 1.3.6.1.4.1.277.1.7.2.1.61 | cardDiagFailures | 0 | 0 | Number of failed diagnostic passes. |
| 1.3.6.1.4.1.277.1.7.2.1.62 | cardDiagResultString | 0 | 0 | Description of last diagnostic failure. |
| 1.3.6.1.4.1.277.1.7.2.1.63 | cardFrameMemoryUtil | 0 | 0 | The percentage of frame memory utilization on this intelligent card. |
| 1.3.6.1.4.1.277.1.7.2.1.64 | cardResetPram | 0 | 0 | Setting this to 1 causes a reset of PRAM on the corresponding card. |
| 1.3.6.1.4.1.277.1.7.2.1.65 | cardMemoryUtil | 0 | 0 | The percentage of system memory utilization on this intelligent card. |
| 1.3.6.1.4.1.277.1.7.2.1.66 | cardFrameMemoryUsage | 0 | 0 | The frame memory utilization, in terms of free bytes, for this intelligent card. |
| 1.3.6.1.4.1.277.1.7.2.1.67 | cardUpTime | 0 | 0 | The time (in hundredths of a second) since this card was last booted. |
| 1.3.6.1.4.1.277.1.7.2.1.68 | cardPramChecksum | 0 | 0 | The PRAM checksum for this card. |
| 1.3.6.1.4.1.277.1.7.2.1.69 | cardPhysicalIndex | 0 | 0 | The physical slot id of this card. |
| 1.3.6.1.4.1.277.1.7.2.1.70 | cardExternalClockRate | 0 | 0 | The external clock rate for DSX1, T1 and E1 cards. The value is specified in units of 8KHz and can range from 1 to 255. |
| 1.3.6.1.4.1.277.1.7.2.1.71 | cardShootState | 0 | 0 | Specifies whether the system monitor on the CP should shoot this card if it's unreachable. The default is enabled. The card index… |
| 1.3.6.1.4.1.277.1.7.2.1.72 | cardEraseAll | 0 | 0 | When set to 1, erases program flash and PRAM on specified card. |
| 1.3.6.1.4.1.277.1.7.2.1.73 | cardAdminCapability | 0 | 0 | The desired capability of the card |
| 1.3.6.1.4.1.277.1.7.2.1.75 | cardISDNswtype | 0 | 0 | Specifies the ISDN central office switch type for the card. |
| 1.3.6.1.4.1.277.1.7.2.1.76 | cardCpuFgUtil | 0 | 0 | The CPU foreground utilization percentage for packet processing on this intelligent card. |
| 1.3.6.1.4.1.277.1.7.2.1.77 | cardTrkProtState | 0 | 0 | Control for issue of Link Trunk Protocol request frames. If set to disabled, the issue of trunk protocol requests is blocked for… |
| 1.3.6.1.4.1.277.1.7.2.1.78 | cardISDNSigType | 0 | 0 | Specifies whether the ISDN Signalling type is Associated or Non-Facility Associated Signalling |
| 1.3.6.1.4.1.277.1.7.2.1.79 | cardISDNChanId | 0 | 0 | Specifies whether Channel ID assignment is performed by the central office switch or the 9000 - Exclusive (central office) Prefer… |
| 1.3.6.1.4.1.277.1.7.2.1.80 | cardTransmitClockConfig | 0 | 0 | The transmit clock source for timing section of the card |
| 1.3.6.1.4.1.277.1.7.2.1.81 | cardTransmitClockSwitchOver | 0 | 0 | Enable/disable automatic transmit clock source switch-over once a failed clock reference has recovered. |
| 1.3.6.1.4.1.277.1.7.2.1.82 | cardTransmitClockStatus | 0 | 0 | The transmit clock PLL synchronization status of the card |
| 1.3.6.1.4.1.277.1.7.2.1.83 | cardSystemPrimaryClockPortConfig | 0 | 0 | The port number (1-x) on the card that specifies the system primary clock source. A zero specifies no port |
| 1.3.6.1.4.1.277.1.7.2.1.84 | cardSystemPrimaryClockStatus | 0 | 0 | The system primary clock status as detected on the card. |
| 1.3.6.1.4.1.277.1.7.2.1.85 | cardSystemSecondaryClockPortConfig | 0 | 0 | The port number (1 to x) on the card that specifies the system secondary clock source. A zero specifies no port |
| 1.3.6.1.4.1.277.1.7.2.1.86 | cardSystemSecondaryClockStatus | 0 | 0 | The system secondary clock status as detected on the card. |
| 1.3.6.1.4.1.277.1.7.2.1.87 | cardInCells | 0 | 0 | The total number of cells received on this card. |
| 1.3.6.1.4.1.277.1.7.2.1.88 | cardInErrorCells | 0 | 0 | The total number of cells received on this card with HEC error. |
| 1.3.6.1.4.1.277.1.7.2.1.89 | cardInErrorVPIVCI | 0 | 0 | The total number of cells received with HEC invalid VPI, VCI. |
| 1.3.6.1.4.1.277.1.7.2.1.90 | cardOutCells | 0 | 0 | The total number of cells transmitted out of this card |
| 1.3.6.1.4.1.277.1.7.2.1.91 | cardOutDiscardCells | 0 | 0 | The total number of cells discarded due to congestion on this card |
| 1.3.6.1.4.1.277.1.7.2.1.92 | cardQOSQueueSize | 0 | 0 | The ATM QOS queue size (per cell) of each port on the card |
| 1.3.6.1.4.1.277.1.7.2.1.93 | cardLastErrorPort | 0 | 0 | The port number (1 to x) of the last cell with invalid cell header on the card |
| 1.3.6.1.4.1.277.1.7.2.1.94 | cardLastErrorVPI | 0 | 0 | The VPI of the last cell with invalid cell header on the card |
| 1.3.6.1.4.1.277.1.7.2.1.95 | cardLastErrorVCI | 0 | 0 | The VCI of the last cell with invalid cell header on the card |
| 1.3.6.1.4.1.277.1.7.2.1.96 | cardSystemPrimaryClockModeConfig | 0 | 0 | The system primary clock mode. PLCP is for DS3 port only |
| 1.3.6.1.4.1.277.1.7.2.1.97 | cardSystemSecondaryClockModeConfig | 0 | 0 | The system secondary clock mode. PLCP is for DS3 port only |
| 1.3.6.1.4.1.277.1.7.2.1.98 | cardNFBDEStatus | 0 | 0 | Non Fatal Background Diagnostic Error Status |
| 1.3.6.1.4.1.277.1.7.2.1.99 | cardProductCode | 0 | 0 | This card's product code. |
| 1.3.6.1.4.1.277.1.7.2.1.100 | cardMfgPN | 0 | 0 | This card's manufacturing part number. |
| 1.3.6.1.4.1.277.1.7.2.1.101 | cardTotalUpTime | 0 | 0 | This card's total accumulated up time, in hours. |
| 1.3.6.1.4.1.277.1.7.2.1.102 | cardIOAType | 0 | 0 | The type of IOA attached to this card. |
| 1.3.6.1.4.1.277.1.7.2.1.103 | cardIOAHwRev | 0 | 0 | The attached IOA's hardware revision. |
| 1.3.6.1.4.1.277.1.7.2.1.104 | cardIOASerial | 0 | 0 | The attached IOA's serial number. |
| 1.3.6.1.4.1.277.1.7.2.1.105 | cardIOAProductCode | 0 | 0 | The attached IOA's product code. |
| 1.3.6.1.4.1.277.1.7.2.1.106 | cardIOAMfgPN | 0 | 0 | The attached IOA's manufacturing part number. |
| 1.3.6.1.4.1.277.1.7.2.1.107 | cardDS0Support | 0 | 0 | Some B-Stdx T1 boards do not support lpbk. |
| 1.3.6.1.4.1.277.1.7.2.1.108 | cardDiagParamId | 0 | 0 | Parameter identifier for internal diagnostics. |
| 1.3.6.1.4.1.277.1.7.2.1.109 | cardDiagParamValue | 0 | 0 | Value assigned to parameter specified by cardDiagParamId. |
| 1.3.6.1.4.1.277.1.7.2.1.110 | cardBulkStatsPeakCapability | 0 | 0 | Configures capability to collect peak 5-minute statistics. Capability change takes effect upon IOM reboot. |
| 1.3.6.1.4.1.277.1.7.2.1.111 | cardBulkStatsTotalCapability | 0 | 0 | Configures capability to collect total statistics. Capability change takes effect upon IOM reboot. |
| 1.3.6.1.4.1.277.1.7.2.1.112 | cardBulkStatsPeakEnable | 0 | 0 | Reflects the operational state of the peak 5-minute statistic collection on an IOM. For this setting to be enabled, the respectiv… |
| 1.3.6.1.4.1.277.1.7.2.1.113 | cardBulkStatsTotalEnable | 0 | 0 | Reflects the operational state of the total statistic collection on an IOM. For this setting to be enabled, the respective capabi… |
| 1.3.6.1.4.1.277.1.7.2.1.114 | cardBulkStatsBaseCollectPeriod | 0 | 0 | Configures base collection period for bulk statistics on an IOM in minutes. Only the following values are allowed: 15, 20, 30, 60… |
| 1.3.6.1.4.1.277.1.7.2.1.115 | cardNrtsHwRev | 0 | 0 | Hardware revision of the NRTS processor. |
| 1.3.6.1.4.1.277.1.7.2.1.116 | cardNrtsOutCellBufSize | 0 | 0 | The size of the NRTS output cell buffer. |
| 1.3.6.1.4.1.277.1.7.2.1.117 | cardNrtsOperState | 0 | 0 | The operational status of the NRTS processor. |
| 1.3.6.1.4.1.277.1.7.2.1.118 | cardNrtsAdminState | 0 | 0 | The admin status of the NRTS processor. |
| 1.3.6.1.4.1.277.1.7.2.1.119 | cardNrtsCcrmProtocolId | 0 | 0 | The protocol ID field for the CCRM cells. Must be different from the BCM protocol ID. Default is 6. |
| 1.3.6.1.4.1.277.1.7.2.1.120 | cardNrtsBcmProtocolId | 0 | 0 | The protocol ID field for the BCM cells. Must be different from the CCRM protocol ID. Default is 5. |
| 1.3.6.1.4.1.277.1.7.2.1.121 | cardNrtsRmGenInterval | 0 | 0 | The RM cell generation interval in ms. Minimum is 30, maximum is 250, default is 100. |
| 1.3.6.1.4.1.277.1.7.2.1.122 | cardNrtsIdleCktThresh | 0 | 0 | The number of RM cell generation intervals with no cell reception upon which the circuit is declared idle. Minimum is 1, maximum … |
| 1.3.6.1.4.1.277.1.7.2.1.123 | cardNrtsVbrNrtManage | 0 | 0 | Indicates whether VBR NRT traffic should be managed by the NRTS processor. |
| 1.3.6.1.4.1.277.1.7.2.1.124 | cardNrtsIcrFact | 0 | 0 | A factor used to calculate the Initial Cell Rate for a circuit from its MCR and PCR. |
| ... | ||||