Vendor: Cascade Communications
Module: CASCADE-MIB (cascade.mib)
Type: OBJ ID
Access:
Syntax:
Automatically extracted from www.mibdepot.com
atmacct OBJECT IDENTIFIER ::= { cascatm 1 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.277.16.1.1 | atmacctControl | 1 | 1 | This object defines the capability to enable or disable usage-based ATM accounting at the switch level. The possible values are: d… |
| 1.3.6.1.4.1.277.16.1.2 | atmacctASAddressPri | 1 | 1 | The IP Address of the primary Accounting Server that is servicing ATM accounting for this switch. |
| 1.3.6.1.4.1.277.16.1.3 | atmacctSwASCommsFailures | 1 | 1 | The number of times that communication from the switch to the ATM Accounting Server has failed during the current day. A failure… |
| 1.3.6.1.4.1.277.16.1.4 | atmacctPvcAggrPeriod | 1 | 1 | This object defines the recording interval over which PVC usage measurements are taken and transferred to the Adjunct Processor (… |
| 1.3.6.1.4.1.277.16.1.5 | atmacctPvcCurAggrPeriodStart | 1 | 1 | The start-time (GMT) of the current ATM PVC recording interval. |
| 1.3.6.1.4.1.277.16.1.6 | atmacctPvcCurAggrPeriodEnd | 1 | 1 | The end-time (GMT) of the current ATM PVC recording interval. |
| 1.3.6.1.4.1.277.16.1.7 | atmacctCollectionPeriod | 1 | 1 | This object defines how often the switch snapshots the state of all ATM PVCs and SVCs to stable storage. Acceptable values repres… |
| 1.3.6.1.4.1.277.16.1.8 | atmacctSvcUsageRecCreated | 1 | 1 | Count of the number of new SVCs for which usage records were created during the current rate period. |
| 1.3.6.1.4.1.277.16.1.9 | atmacctSvcTotalUsageRecCreated | 1 | 1 | Count of the number of new SVCs for which usage records were created during the current day. |
| 1.3.6.1.4.1.277.16.1.10 | atmacctPvcUsageRecCreated | 1 | 1 | This object reports the number of PVC usage records that were created at the end of the previous recording interval. This counter… |
| 1.3.6.1.4.1.277.16.1.11 | atmacctUsageRecCrFailures | 1 | 1 | Total number of usage records that could not be created during the current day. |
| 1.3.6.1.4.1.277.16.1.12 | atmacctUsageRecSent | 1 | 1 | Total number of usage records that have been transferred to the ATM Accounting Server during the current day. |
| 1.3.6.1.4.1.277.16.1.13 | atmacctAdminAction | 1 | 1 | This object defines a set of administrative actions that can be performed by the ATM Accounting System. forceUpload - Forces an … |
| 1.3.6.1.4.1.277.16.1.14 | atmacctOamCellCounting | 1 | 1 | This object controls the recording of OAM cell when PVC and/or SVC usage measurement is enabled. Possible values are: dontcount … |
| 1.3.6.1.4.1.277.16.1.15 | atmacctSvcCbrCellCounting | 1 | 1 | This object is used to enable or disable CBR SVC cell counting when CBR Recording is enabled. For Intra-network CBR SVCs, the swi… |
| 1.3.6.1.4.1.277.16.1.16 | atmacctSvcAbrRecording | 1 | 1 | This object is used to enable or disable the recording of ATM ABR SVCs. For Intra-network ABR SVCs, the switch will generate usage… |
| 1.3.6.1.4.1.277.16.1.17 | atmacctSvcCbrRecording | 1 | 1 | This object is used to enable or disable the recording of ATM CBR SVCs. For Intra-network CBR SVCs, the switch will generate usage… |
| 1.3.6.1.4.1.277.16.1.18 | atmacctSvcUbrRecording | 1 | 1 | This object is used to enable or disable the recording of ATM UBR SVCs. For Intra-network UBR SVCs, the switch will generate usage… |
| 1.3.6.1.4.1.277.16.1.19 | atmacctSvcVbrRecording | 1 | 1 | This object is used to enable or disable the recording of ATM VBR SVCs. For Intra-network VBR SVCs, the switch will generate usage… |
| 1.3.6.1.4.1.277.16.1.20 | atmacctAvgTransportBwUsed | 1 | 1 | This object reports the average amount of bandwidth (in bits per second) that has been used to transport ATM Accounting data to t… |
| 1.3.6.1.4.1.277.16.1.21 | atmacctAvgTransportBwBurst | 1 | 1 | This object reports the average transport bandwidth burst rate (in bits per second) obtained to transport ATM accounting data to … |
| 1.3.6.1.4.1.277.16.1.22 | atmacctMinTransportBwBurst | 1 | 1 | This object reports the minimum transport bandwidth burst rate (in bits per second) obtained to transport ATM accounting data to … |
| 1.3.6.1.4.1.277.16.1.23 | atmacctMaxTransportBwBurst | 1 | 1 | This object reports the maximum transport bandwidth burst rate (in bits per second) obtained to transport ATM accounting data to … |
| 1.3.6.1.4.1.277.16.1.24 | atmacctLportTable | 1 | 15 | A table of lport-related ATM Accounting System managable objects, indexed by logical port identifier. |
| 1.3.6.1.4.1.277.16.1.25 | atmacctCktTable | 1 | 8 | A table of ckt-related ATM Accounting System managable objects, indexed by source logical port id and source DLCI (concatenated V… |
| 1.3.6.1.4.1.277.16.1.26 | atmacctStressTestRate | 1 | 1 | The rate (calls/sec/IOM) of simulated SVCs, for stress testing the accounting components on the IOMs and SP. This object is for i… |
| 1.3.6.1.4.1.277.16.1.27 | atmacctASAddressSec | 1 | 1 | The IP Address of the secondary Accounting Processor that is servicing ATM accounting for this switch. |
| 1.3.6.1.4.1.277.16.1.28 | atmacctASControl | 1 | 1 | This object controls which configured ATM Accounting Accounting Server address is to be used for transferring usage data. |
| 1.3.6.1.4.1.277.16.1.29 | atmacctOperState | 1 | 1 | This object corresponds to the operational state of the ATM Accounting system on the switch. The possible values are: disabled -… |
| 1.3.6.1.4.1.277.16.1.30 | atmacctASCommsState | 1 | 1 | This object identifies the current state of communications to the ATM Accounting Server. Possible values are: red - File transf… |
| 1.3.6.1.4.1.277.16.1.31 | atmacctLastBWResetTime | 1 | 1 | The last time (GMT) that the AS Communications Bandwidth tracking statistics were reset to zero. |
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.277.16.2 | atmckt | 1 | 19 | None |