This object defines the capability to enable or disable
usage-based ATM accounting at the switch level.
The possible values are:
disabled - Usage measurement is disabled
pvcenabled - Usage measurement is enabled for PVCs only
svcenabled - Usage measurement is enabled for SVCs only
enabled - Usage measurement is enabled for PVCs and SVCs
When the value of this object is a value other than 'disabled',
the value of a logical port's accounting capability objects
will take precedence.
When the value of this object is 'disabled', it overrides
all logical ports' accounting capability objects and accounting
is disabled across the entire switch.
The default value of this object is 'disabled'.
This object is considered to be to 'administrative' state
of the ATM accounting system on the switch, whereas the object
atmacctOperState is the corresponding operational state.
Parsed from file cascade.mib.txt
Company: cascade
Module: CASCADE-MIB
Child arc 0 is used to translate between SNMPv1 and SNMPv2 notification parameters as explained in IETF RFC 2576, section 3.
atmacctControl OBJECT-TYPE SYNTAX INTEGER { disabled (1), pvcenabled (2), svcenabled (3), enabled (4) } ACCESS read-write STATUS mandatory DESCRIPTION "This object defines the capability to enable or disable usage-based ATM accounting at the switch level. The possible values are: disabled - Usage measurement is disabled pvcenabled - Usage measurement is enabled for PVCs only svcenabled - Usage measurement is enabled for SVCs only enabled - Usage measurement is enabled for PVCs and SVCs When the value of this object is a value other than 'disabled', the value of a logical port's accounting capability objects will take precedence. When the value of this object is 'disabled', it overrides all logical ports' accounting capability objects and accounting is disabled across the entire switch. The default value of this object is 'disabled'. This object is considered to be to 'administrative' state of the ATM accounting system on the switch, whereas the object atmacctOperState is the corresponding operational state." ::= { atmacct 1 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.277.16.1.1.0 | atmacctControl | 0 | 0 | None |
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.277.16.1.2 | atmacctASAddressPri | 1 | 1 | The IP Address of the primary Accounting Server that is servicing ATM accounting for this switch. |
| 1.3.6.1.4.1.277.16.1.3 | atmacctSwASCommsFailures | 1 | 1 | The number of times that communication from the switch to the ATM Accounting Server has failed during the current day. A failure… |
| 1.3.6.1.4.1.277.16.1.4 | atmacctPvcAggrPeriod | 1 | 1 | This object defines the recording interval over which PVC usage measurements are taken and transferred to the Adjunct Processor (… |
| 1.3.6.1.4.1.277.16.1.5 | atmacctPvcCurAggrPeriodStart | 1 | 1 | The start-time (GMT) of the current ATM PVC recording interval. |
| 1.3.6.1.4.1.277.16.1.6 | atmacctPvcCurAggrPeriodEnd | 1 | 1 | The end-time (GMT) of the current ATM PVC recording interval. |
| 1.3.6.1.4.1.277.16.1.7 | atmacctCollectionPeriod | 1 | 1 | This object defines how often the switch snapshots the state of all ATM PVCs and SVCs to stable storage. Acceptable values repres… |
| 1.3.6.1.4.1.277.16.1.8 | atmacctSvcUsageRecCreated | 1 | 1 | Count of the number of new SVCs for which usage records were created during the current rate period. |
| 1.3.6.1.4.1.277.16.1.9 | atmacctSvcTotalUsageRecCreated | 1 | 1 | Count of the number of new SVCs for which usage records were created during the current day. |
| 1.3.6.1.4.1.277.16.1.10 | atmacctPvcUsageRecCreated | 1 | 1 | This object reports the number of PVC usage records that were created at the end of the previous recording interval. This counter… |
| 1.3.6.1.4.1.277.16.1.11 | atmacctUsageRecCrFailures | 1 | 1 | Total number of usage records that could not be created during the current day. |
| 1.3.6.1.4.1.277.16.1.12 | atmacctUsageRecSent | 1 | 1 | Total number of usage records that have been transferred to the ATM Accounting Server during the current day. |
| 1.3.6.1.4.1.277.16.1.13 | atmacctAdminAction | 1 | 1 | This object defines a set of administrative actions that can be performed by the ATM Accounting System. forceUpload - Forces an … |
| 1.3.6.1.4.1.277.16.1.14 | atmacctOamCellCounting | 1 | 1 | This object controls the recording of OAM cell when PVC and/or SVC usage measurement is enabled. Possible values are: dontcount … |
| 1.3.6.1.4.1.277.16.1.15 | atmacctSvcCbrCellCounting | 1 | 1 | This object is used to enable or disable CBR SVC cell counting when CBR Recording is enabled. For Intra-network CBR SVCs, the swi… |
| 1.3.6.1.4.1.277.16.1.16 | atmacctSvcAbrRecording | 1 | 1 | This object is used to enable or disable the recording of ATM ABR SVCs. For Intra-network ABR SVCs, the switch will generate usage… |
| 1.3.6.1.4.1.277.16.1.17 | atmacctSvcCbrRecording | 1 | 1 | This object is used to enable or disable the recording of ATM CBR SVCs. For Intra-network CBR SVCs, the switch will generate usage… |
| 1.3.6.1.4.1.277.16.1.18 | atmacctSvcUbrRecording | 1 | 1 | This object is used to enable or disable the recording of ATM UBR SVCs. For Intra-network UBR SVCs, the switch will generate usage… |
| 1.3.6.1.4.1.277.16.1.19 | atmacctSvcVbrRecording | 1 | 1 | This object is used to enable or disable the recording of ATM VBR SVCs. For Intra-network VBR SVCs, the switch will generate usage… |
| 1.3.6.1.4.1.277.16.1.20 | atmacctAvgTransportBwUsed | 1 | 1 | This object reports the average amount of bandwidth (in bits per second) that has been used to transport ATM Accounting data to t… |
| 1.3.6.1.4.1.277.16.1.21 | atmacctAvgTransportBwBurst | 1 | 1 | This object reports the average transport bandwidth burst rate (in bits per second) obtained to transport ATM accounting data to … |
| 1.3.6.1.4.1.277.16.1.22 | atmacctMinTransportBwBurst | 1 | 1 | This object reports the minimum transport bandwidth burst rate (in bits per second) obtained to transport ATM accounting data to … |
| 1.3.6.1.4.1.277.16.1.23 | atmacctMaxTransportBwBurst | 1 | 1 | This object reports the maximum transport bandwidth burst rate (in bits per second) obtained to transport ATM accounting data to … |
| 1.3.6.1.4.1.277.16.1.24 | atmacctLportTable | 1 | 15 | A table of lport-related ATM Accounting System managable objects, indexed by logical port identifier. |
| 1.3.6.1.4.1.277.16.1.25 | atmacctCktTable | 1 | 8 | A table of ckt-related ATM Accounting System managable objects, indexed by source logical port id and source DLCI (concatenated V… |
| 1.3.6.1.4.1.277.16.1.26 | atmacctStressTestRate | 1 | 1 | The rate (calls/sec/IOM) of simulated SVCs, for stress testing the accounting components on the IOMs and SP. This object is for i… |
| 1.3.6.1.4.1.277.16.1.27 | atmacctASAddressSec | 1 | 1 | The IP Address of the secondary Accounting Processor that is servicing ATM accounting for this switch. |
| 1.3.6.1.4.1.277.16.1.28 | atmacctASControl | 1 | 1 | This object controls which configured ATM Accounting Accounting Server address is to be used for transferring usage data. |
| 1.3.6.1.4.1.277.16.1.29 | atmacctOperState | 1 | 1 | This object corresponds to the operational state of the ATM Accounting system on the switch. The possible values are: disabled -… |
| 1.3.6.1.4.1.277.16.1.30 | atmacctASCommsState | 1 | 1 | This object identifies the current state of communications to the ATM Accounting Server. Possible values are: red - File transf… |
| 1.3.6.1.4.1.277.16.1.31 | atmacctLastBWResetTime | 1 | 1 | The last time (GMT) that the AS Communications Bandwidth tracking statistics were reset to zero. |