An entry in the Appian Logical DS1 Configuration table.
Parsed from file lport_ds1.mib.txt
Company: None
Module: APPIAN-LPORT-DS1-MIB
An entry in the Appian Logical DS1 Configuration table.
Parsed from file APPIAN-LPORT-DS1-MIB.mib
Module: APPIAN-LPORT-DS1-MIB
Vendor: Tecnopro SA
Module: APPIAN-LPORT-DS1-MIB
[Automatically extracted from oidview.com]
acLogicalDs1ConfigEntry OBJECT-TYPE SYNTAX AcLogicalDs1ConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the Appian Logical DS1 Configuration table." INDEX { acLogicalDs1ConfigNodeId, acLogicalDs1ConfigIndex } ::= { acLogicalDs1ConfigTable 1 }
acLogicalDs1ConfigEntry OBJECT-TYPE SYNTAX AcLogicalDs1ConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the Appian Logical DS1 Configuration table." INDEX { acLogicalDs1ConfigNodeId, acLogicalDs1ConfigIndex } ::= { acLogicalDs1ConfigTable 1 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.2785.2.4.2.1.1.1 | acLogicalDs1ConfigNodeId | 0 | 0 | The node id is the id for this specific node in the OSAP ring. |
| 1.3.6.1.4.1.2785.2.4.2.1.1.2 | acLogicalDs1ConfigIndex | 0 | 0 | This value for this object is equal to the value of index from the Time Slot Table that this DS1 corresponds. The value can be a… |
| 1.3.6.1.4.1.2785.2.4.2.1.1.3 | acLogicalDs1ConfigAdminStatus | 0 | 0 | Appian Administrative Status attribute used to set the provisioning state as either activate(1), inactivate(2) or delete(3). Re… |
| 1.3.6.1.4.1.2785.2.4.2.1.1.4 | acLogicalDs1ConfigTimeElapsedInterval | 0 | 0 | The number of seconds that have elapsed since the beginning of the near end current error- measurement period. If, for some reas… |
| 1.3.6.1.4.1.2785.2.4.2.1.1.5 | acLogicalDs1ConfigValidIntervals | 0 | 0 | The number of previous near end intervals for which data was collected. The value will be 96 unless the interface was brought on… |
| 1.3.6.1.4.1.2785.2.4.2.1.1.6 | acLogicalDs1ConfigTimeElapsedDay | 0 | 0 | The number of seconds that have elapsed since the beginning of the near end current day error- measurement period. If, for some … |
| 1.3.6.1.4.1.2785.2.4.2.1.1.7 | acLogicalDs1ConfigValidDays | 0 | 0 | The number of previous near end days for which data was collected. The value will be 30 unless the interface was brought online … |
| 1.3.6.1.4.1.2785.2.4.2.1.1.8 | acLogicalDs1ConfigTimeElapsedFarEndInterval | 0 | 0 | The number of seconds that have elapsed since the beginning of the far end current error-measurement period. If, for some reason… |
| 1.3.6.1.4.1.2785.2.4.2.1.1.9 | acLogicalDs1ConfigValidFarEndIntervals | 0 | 0 | The number of previous near end intervals for which data was collected. The value will be 96 unless the interface was brought on… |
| 1.3.6.1.4.1.2785.2.4.2.1.1.10 | acLogicalDs1ConfigTimeElapsedFarEndDay | 0 | 0 | The number of seconds that have elapsed since the beginning of the far end current day error- measurement period. If, for some r… |
| 1.3.6.1.4.1.2785.2.4.2.1.1.11 | acLogicalDs1ConfigValidFarEndDays | 0 | 0 | The number of previous near end days for which data was collected. The value will be 30 unless the far/near end interface was br… |
| 1.3.6.1.4.1.2785.2.4.2.1.1.12 | acLogicalDs1ConfigSendCode | 0 | 0 | This variable indicates what type of code is being sent across the DS1 interface by the device. Setting this variable causes the … |
| 1.3.6.1.4.1.2785.2.4.2.1.1.13 | acLogicalDs1ConfigCircuitIdentifier | 0 | 0 | This variable contains the transmission vendor's circuit identifier, for the purpose of facilitating troubleshooting. |
| 1.3.6.1.4.1.2785.2.4.2.1.1.14 | acLogicalDs1ConfigLoopbackConfig | 0 | 0 | This variable represents the desired loopback configuration of the DS1 interface. Agents supporting read/write access should ret… |
| 1.3.6.1.4.1.2785.2.4.2.1.1.15 | acLogicalDs1ConfigLineStatus | 0 | 0 | This variable indicates the Line Status of the interface. It contains loopback, failure, received 'alarm' and transmitted 'alarm… |
| 1.3.6.1.4.1.2785.2.4.2.1.1.16 | acLogicalDs1ConfigTransmitClockSource | 0 | 0 | The source of Transmit Clock. For the logicalDs1, the timing will be throughTiming. This is not currently a configurable paramet… |
| 1.3.6.1.4.1.2785.2.4.2.1.1.17 | acLogicalDs1ConfigInvalidIntervals | 0 | 0 | The number of intervals in the range from 0 to ds1ValidIntervals for which no data is available. This object will typically be z… |
| 1.3.6.1.4.1.2785.2.4.2.1.1.18 | acLogicalDs1ConfigInvalidDays | 0 | 0 | The number of days in the range from 0 to ds1ValidDays for which no data is available. This object will typically be zero except … |
| 1.3.6.1.4.1.2785.2.4.2.1.1.19 | acLogicalDs1ConfigInvalidFarEndIntervals | 0 | 0 | The number of intervals in the range from 0 to acLogicalDs1ConfigValidFarEndIntervals for which no data is available. This objec… |
| 1.3.6.1.4.1.2785.2.4.2.1.1.20 | acLogicalDs1ConfigInvalidFarEndDays | 0 | 0 | The number of days in the range from 0 to acLogicalDs1ConfigValidFarEndDays for which no data is available. This object will typ… |
| 1.3.6.1.4.1.2785.2.4.2.1.1.21 | acLogicalDs1ConfigLineStatusLastChange | 0 | 0 | The value of MIB II's sysUpTime object at the time this DS1 entered its current line status state. If the current state was ente… |
| 1.3.6.1.4.1.2785.2.4.2.1.1.22 | acLogicalDs1ConfigLineStatusChangeTrapEnable | 0 | 0 | Indicates whether acLogicalDs1ConfigLineStatusChange traps should be generated for this interface. |
| 1.3.6.1.4.1.2785.2.4.2.1.1.23 | acLogicalDs1ConfigLoopbackStatus | 0 | 0 | This variable represents the current state of the loopback on the DS1 interface. It contains information about loopbacks establi… |
| 1.3.6.1.4.1.2785.2.4.2.1.1.24 | acLogicalDs1ConfigVTNumber | 0 | 0 | This variable represents the virtual tributary number in the STS-1 frame that this DS1 corresponds to. |