An entry in the Appian Logical DS3 Configuration table.
Parsed from file lport_ds3.mib.txt
Company: None
Module: APPIAN-LPORT-DS3-MIB
An entry in the Appian Logical DS3 Configuration table.
Parsed from file APPIAN-LPORT-DS3-MIB.mib
Module: APPIAN-LPORT-DS3-MIB
Vendor: Tecnopro SA
Module: APPIAN-LPORT-DS3-MIB
[Automatically extracted from oidview.com]
acLogicalDs3ConfigEntry OBJECT-TYPE SYNTAX AcDs3ConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the Appian Logical DS3 Configuration table." INDEX { acLogicalDs3ConfigNodeId, acLogicalDs3ConfigIndex } ::= { acLogicalDs3ConfigTable 1 }
acLogicalDs3ConfigEntry OBJECT-TYPE SYNTAX AcDs3ConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the Appian Logical DS3 Configuration table." INDEX { acLogicalDs3ConfigNodeId, acLogicalDs3ConfigIndex } ::= { acLogicalDs3ConfigTable 1 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.2785.2.4.3.1.1.1 | acLogicalDs3ConfigNodeId | 0 | 0 | The node id is the id for this specific node in the OSAP ring. |
| 1.3.6.1.4.1.2785.2.4.3.1.1.2 | acLogicalDs3ConfigIndex | 0 | 0 | This value for this object is equal to the value of index from the Time Slot Table that this DS3 corresponds. The number can be … |
| 1.3.6.1.4.1.2785.2.4.3.1.1.3 | acLogicalDs3ConfigAdminStatus | 0 | 0 | Appian Administrative Status attribute used to set the provisioning state as either activate(1), inactivate(2) or delete(3). Re… |
| 1.3.6.1.4.1.2785.2.4.3.1.1.4 | acLogicalDs3ConfigTimeElapsedInterval | 0 | 0 | The number of seconds that have elapsed since the beginning of the near end current error measurement period. If, for some reaso… |
| 1.3.6.1.4.1.2785.2.4.3.1.1.5 | acLogicalDs3ConfigValidIntervals | 0 | 0 | The number of previous near end intervals for which data was collected. The value will be 96 unless the interface was brought on… |
| 1.3.6.1.4.1.2785.2.4.3.1.1.6 | acLogicalDs3ConfigTimeElapsedDay | 0 | 0 | The number of seconds that have elapsed since the beginning of the near end current day error measurement period. If, for some r… |
| 1.3.6.1.4.1.2785.2.4.3.1.1.7 | acLogicalDs3ConfigValidDays | 0 | 0 | The number of previous near end intervals for which data was collected. The value will be 30 unless the interface was brought on… |
| 1.3.6.1.4.1.2785.2.4.3.1.1.8 | acLogicalDs3ConfigTimeElapsedFarEndInterval | 0 | 0 | The number of seconds that have elapsed since the beginning of the far end current error-measurement period. If, for some reason… |
| 1.3.6.1.4.1.2785.2.4.3.1.1.9 | acLogicalDs3ConfigValidFarEndIntervals | 0 | 0 | The number of previous far end intervals for which data was collected. The value will be 96 unless the interface was brought onl… |
| 1.3.6.1.4.1.2785.2.4.3.1.1.10 | acLogicalDs3ConfigTimeElapsedFarEndDay | 0 | 0 | The number of seconds that have elapsed since the beginning of the far end current day error measurement period. If, for some re… |
| 1.3.6.1.4.1.2785.2.4.3.1.1.11 | acLogicalDs3ConfigValidFarEndDays | 0 | 0 | The number of previous far end days for which data was collected. The value will be 30 unless the interface was brought online wi… |
| 1.3.6.1.4.1.2785.2.4.3.1.1.12 | acLogicalDs3ConfigSendCode | 0 | 0 | This variable indicates what type of code is being sent across the DS3 interface by the device. Setting this variable causes the … |
| 1.3.6.1.4.1.2785.2.4.3.1.1.13 | acLogicalDs3ConfigCircuitIdentifier | 0 | 0 | This variable contains the transmission vendor's circuit identifier, for the purpose of facilitating troubleshooting. |
| 1.3.6.1.4.1.2785.2.4.3.1.1.14 | acLogicalDs3ConfigLoopbackConfig | 0 | 0 | This variable represents the desired loopback configuration of the DS3 interface. The values mean: ds3NoLoop Not in the loopback st… |
| 1.3.6.1.4.1.2785.2.4.3.1.1.15 | acLogicalDs3ConfigLineStatus | 0 | 0 | This variable indicates the Line Status of the interface. It contains loopback state information and failure state information. … |
| 1.3.6.1.4.1.2785.2.4.3.1.1.16 | acLogicalDs3ConfigTransmitClockSource | 0 | 0 | The source of Transmit Clock. For logicalDs3, the clock source will be throughTiming. loopTiming indicates that the recovered rec… |
| 1.3.6.1.4.1.2785.2.4.3.1.1.17 | acLogicalDs3ConfigInvalidIntervals | 0 | 0 | The number of intervals in the range from 0 to acLogicalDs3ConfigValidIntervals for which no data is available. This object will … |
| 1.3.6.1.4.1.2785.2.4.3.1.1.18 | acLogicalDs3ConfigInvalidDays | 0 | 0 | The number of days in the range from 0 to acLogicalDs3ConfigValidDays for which no data is available. This object will typicall… |
| 1.3.6.1.4.1.2785.2.4.3.1.1.19 | acLogicalDs3ConfigInvalidFarEndIntervals | 0 | 0 | The number of intervals in the range from 0 to acLogicalDs3ConfigValidFarEndIntervals for which no data is available. This object… |
| 1.3.6.1.4.1.2785.2.4.3.1.1.20 | acLogicalDs3ConfigInvalidFarEndDays | 0 | 0 | The number of days in the range from 0 to acLogicalDs3ConfigValidFarEndDays for which no data is available. This object will typi… |
| 1.3.6.1.4.1.2785.2.4.3.1.1.21 | acLogicalDs3ConfigLineStatusLastChange | 0 | 0 | The value of MIB II's sysUpTime object at the time this DS3 entered its current line status state. If the current state was ente… |
| 1.3.6.1.4.1.2785.2.4.3.1.1.22 | acLogicalDs3ConfigLineStatusChangeTrapEnable | 0 | 0 | Indicates whether acDs3ConfigLineStatusChange traps should be generated for this interface. |
| 1.3.6.1.4.1.2785.2.4.3.1.1.23 | acLogicalDs3ConfigLoopbackStatus | 0 | 0 | This variable represents the current state of the loopback on the DS3 interface. It contains information about loopbacks establi… |
| 1.3.6.1.4.1.2785.2.4.3.1.1.24 | acLogicalDs3ConfigFarEndEquipCode | 0 | 0 | This is the Far End Equipment Identification code that describes the specific piece of equipment. It is sent within the Path Ide… |
| 1.3.6.1.4.1.2785.2.4.3.1.1.25 | acLogicalDs3ConfigFarEndLocationIDCode | 0 | 0 | This is the Far End Location Identification code that describes the specific location of the equipment. It is sent within the P… |
| 1.3.6.1.4.1.2785.2.4.3.1.1.26 | acLogicalDs3ConfigFarEndFrameIDCode | 0 | 0 | This is the Far End Frame Identification code that identifies where the equipment is located within a building at a given locatio… |
| 1.3.6.1.4.1.2785.2.4.3.1.1.27 | acLogicalDs3ConfigFarEndUnitCode | 0 | 0 | This is the Far End code that identifies the equipment location within a bay. It is sent within the Path Identification Message… |
| 1.3.6.1.4.1.2785.2.4.3.1.1.28 | acLogicalDs3ConfigFarEndFacilityIDCode | 0 | 0 | This code identifies a specific Far End DS3 path. It is sent within the Path Identification Message (C-bits) from the remote en… |