This variable indicates the Line Status of the interface. It
contains loopback state information and failure state
information. The ds3LineStatus is a bit map represented as a
sum, therefore, it can represent multiple failures and a loopback
(see acDs3LoopbackConfig object for the type of loopback)
simultaneously. The acDs3NoAlarm must be set if and only if no
other flag is set.
If the acDs3ConfigloopbackState bit is set, the loopback in effect can
be determined from the acDs3loopbackConfig object.
The various bit positions are:
1 ds3NoAlarm No alarm present
2 ds3RcvRAIFailure Receiving Yellow/Remote
Alarm Indication
4 ds3XmitRAIAlarm Transmitting Yellow/Remote
Alarm Indication
8 ds3RcvAIS Receiving AIS failure state
16 ds3XmitAIS Transmitting AIS
32 ds3LOF Receiving LOF failure state
64 ds3LOS Receiving LOS failure state
128 ds3LoopbackState Looping the received signal
256 ds3RcvTestCode Receiving a Test Pattern
512 ds3OtherFailure any line status not defined
here
1024 ds3UnavailSigState Near End in Unavailable Signal
State
2048 ds3NetEquipOOS Carrier Equipment Out of Service
Parsed from file lport_ds3.mib.txt
Company: None
Module: APPIAN-LPORT-DS3-MIB
This variable indicates the Line Status of the interface. It
contains loopback state information and failure state
information. The ds3LineStatus is a bit map represented as a
sum, therefore, it can represent multiple failures and a loopback
(see acDs3LoopbackConfig object for the type of loopback)
simultaneously. The acDs3NoAlarm must be set if and only if no
other flag is set.
If the acDs3ConfigloopbackState bit is set, the loopback in effect can
be determined from the acDs3loopbackConfig object.
The various bit positions are:
1 ds3NoAlarm No alarm present
2 ds3RcvRAIFailure Receiving Yellow/Remote
Alarm Indication
4 ds3XmitRAIAlarm Transmitting Yellow/Remote
Alarm Indication
8 ds3RcvAIS Receiving AIS failure state
16 ds3XmitAIS Transmitting AIS
32 ds3LOF Receiving LOF failure state
64 ds3LOS Receiving LOS failure state
128 ds3LoopbackState Looping the received signal
256 ds3RcvTestCode Receiving a Test Pattern
512 ds3OtherFailure any line status not defined
here
1024 ds3UnavailSigState Near End in Unavailable Signal
State
2048 ds3NetEquipOOS Carrier Equipment Out of Service
Parsed from file APPIAN-LPORT-DS3-MIB.mib
Module: APPIAN-LPORT-DS3-MIB
Vendor: Tecnopro SA
Module: APPIAN-LPORT-DS3-MIB
[Automatically extracted from oidview.com]
acLogicalDs3ConfigLineStatus OBJECT-TYPE SYNTAX INTEGER (1..4095) MAX-ACCESS read-only STATUS current DESCRIPTION "This variable indicates the Line Status of the interface. It contains loopback state information and failure state information. The ds3LineStatus is a bit map represented as a sum, therefore, it can represent multiple failures and a loopback (see acDs3LoopbackConfig object for the type of loopback) simultaneously. The acDs3NoAlarm must be set if and only if no other flag is set. If the acDs3ConfigloopbackState bit is set, the loopback in effect can be determined from the acDs3loopbackConfig object. The various bit positions are: 1 ds3NoAlarm No alarm present 2 ds3RcvRAIFailure Receiving Yellow/Remote Alarm Indication 4 ds3XmitRAIAlarm Transmitting Yellow/Remote Alarm Indication 8 ds3RcvAIS Receiving AIS failure state 16 ds3XmitAIS Transmitting AIS 32 ds3LOF Receiving LOF failure state 64 ds3LOS Receiving LOS failure state 128 ds3LoopbackState Looping the received signal 256 ds3RcvTestCode Receiving a Test Pattern 512 ds3OtherFailure any line status not defined here 1024 ds3UnavailSigState Near End in Unavailable Signal State 2048 ds3NetEquipOOS Carrier Equipment Out of Service" ::= { acLogicalDs3ConfigEntry 15 }
acLogicalDs3ConfigLineStatus OBJECT-TYPE SYNTAX INTEGER (1..4095) MAX-ACCESS read-only STATUS current DESCRIPTION "This variable indicates the Line Status of the interface. It contains loopback state information and failure state information. The ds3LineStatus is a bit map represented as a sum, therefore, it can represent multiple failures and a loopback (see acDs3LoopbackConfig object for the type of loopback) simultaneously. The acDs3NoAlarm must be set if and only if no other flag is set. If the acDs3ConfigloopbackState bit is set, the loopback in effect can be determined from the acDs3loopbackConfig object. The various bit positions are: 1 ds3NoAlarm No alarm present 2 ds3RcvRAIFailure Receiving Yellow/Remote Alarm Indication 4 ds3XmitRAIAlarm Transmitting Yellow/Remote Alarm Indication 8 ds3RcvAIS Receiving AIS failure state 16 ds3XmitAIS Transmitting AIS 32 ds3LOF Receiving LOF failure state 64 ds3LOS Receiving LOS failure state 128 ds3LoopbackState Looping the received signal 256 ds3RcvTestCode Receiving a Test Pattern 512 ds3OtherFailure any line status not defined here 1024 ds3UnavailSigState Near End in Unavailable Signal State 2048 ds3NetEquipOOS Carrier Equipment Out of Service" ::= { acLogicalDs3ConfigEntry 15 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.2785.2.4.3.1.1.1 | acLogicalDs3ConfigNodeId | 0 | 0 | The node id is the id for this specific node in the OSAP ring. |
| 1.3.6.1.4.1.2785.2.4.3.1.1.2 | acLogicalDs3ConfigIndex | 0 | 0 | This value for this object is equal to the value of index from the Time Slot Table that this DS3 corresponds. The number can be … |
| 1.3.6.1.4.1.2785.2.4.3.1.1.3 | acLogicalDs3ConfigAdminStatus | 0 | 0 | Appian Administrative Status attribute used to set the provisioning state as either activate(1), inactivate(2) or delete(3). Re… |
| 1.3.6.1.4.1.2785.2.4.3.1.1.4 | acLogicalDs3ConfigTimeElapsedInterval | 0 | 0 | The number of seconds that have elapsed since the beginning of the near end current error measurement period. If, for some reaso… |
| 1.3.6.1.4.1.2785.2.4.3.1.1.5 | acLogicalDs3ConfigValidIntervals | 0 | 0 | The number of previous near end intervals for which data was collected. The value will be 96 unless the interface was brought on… |
| 1.3.6.1.4.1.2785.2.4.3.1.1.6 | acLogicalDs3ConfigTimeElapsedDay | 0 | 0 | The number of seconds that have elapsed since the beginning of the near end current day error measurement period. If, for some r… |
| 1.3.6.1.4.1.2785.2.4.3.1.1.7 | acLogicalDs3ConfigValidDays | 0 | 0 | The number of previous near end intervals for which data was collected. The value will be 30 unless the interface was brought on… |
| 1.3.6.1.4.1.2785.2.4.3.1.1.8 | acLogicalDs3ConfigTimeElapsedFarEndInterval | 0 | 0 | The number of seconds that have elapsed since the beginning of the far end current error-measurement period. If, for some reason… |
| 1.3.6.1.4.1.2785.2.4.3.1.1.9 | acLogicalDs3ConfigValidFarEndIntervals | 0 | 0 | The number of previous far end intervals for which data was collected. The value will be 96 unless the interface was brought onl… |
| 1.3.6.1.4.1.2785.2.4.3.1.1.10 | acLogicalDs3ConfigTimeElapsedFarEndDay | 0 | 0 | The number of seconds that have elapsed since the beginning of the far end current day error measurement period. If, for some re… |
| 1.3.6.1.4.1.2785.2.4.3.1.1.11 | acLogicalDs3ConfigValidFarEndDays | 0 | 0 | The number of previous far end days for which data was collected. The value will be 30 unless the interface was brought online wi… |
| 1.3.6.1.4.1.2785.2.4.3.1.1.12 | acLogicalDs3ConfigSendCode | 0 | 0 | This variable indicates what type of code is being sent across the DS3 interface by the device. Setting this variable causes the … |
| 1.3.6.1.4.1.2785.2.4.3.1.1.13 | acLogicalDs3ConfigCircuitIdentifier | 0 | 0 | This variable contains the transmission vendor's circuit identifier, for the purpose of facilitating troubleshooting. |
| 1.3.6.1.4.1.2785.2.4.3.1.1.14 | acLogicalDs3ConfigLoopbackConfig | 0 | 0 | This variable represents the desired loopback configuration of the DS3 interface. The values mean: ds3NoLoop Not in the loopback st… |
| 1.3.6.1.4.1.2785.2.4.3.1.1.16 | acLogicalDs3ConfigTransmitClockSource | 0 | 0 | The source of Transmit Clock. For logicalDs3, the clock source will be throughTiming. loopTiming indicates that the recovered rec… |
| 1.3.6.1.4.1.2785.2.4.3.1.1.17 | acLogicalDs3ConfigInvalidIntervals | 0 | 0 | The number of intervals in the range from 0 to acLogicalDs3ConfigValidIntervals for which no data is available. This object will … |
| 1.3.6.1.4.1.2785.2.4.3.1.1.18 | acLogicalDs3ConfigInvalidDays | 0 | 0 | The number of days in the range from 0 to acLogicalDs3ConfigValidDays for which no data is available. This object will typicall… |
| 1.3.6.1.4.1.2785.2.4.3.1.1.19 | acLogicalDs3ConfigInvalidFarEndIntervals | 0 | 0 | The number of intervals in the range from 0 to acLogicalDs3ConfigValidFarEndIntervals for which no data is available. This object… |
| 1.3.6.1.4.1.2785.2.4.3.1.1.20 | acLogicalDs3ConfigInvalidFarEndDays | 0 | 0 | The number of days in the range from 0 to acLogicalDs3ConfigValidFarEndDays for which no data is available. This object will typi… |
| 1.3.6.1.4.1.2785.2.4.3.1.1.21 | acLogicalDs3ConfigLineStatusLastChange | 0 | 0 | The value of MIB II's sysUpTime object at the time this DS3 entered its current line status state. If the current state was ente… |
| 1.3.6.1.4.1.2785.2.4.3.1.1.22 | acLogicalDs3ConfigLineStatusChangeTrapEnable | 0 | 0 | Indicates whether acDs3ConfigLineStatusChange traps should be generated for this interface. |
| 1.3.6.1.4.1.2785.2.4.3.1.1.23 | acLogicalDs3ConfigLoopbackStatus | 0 | 0 | This variable represents the current state of the loopback on the DS3 interface. It contains information about loopbacks establi… |
| 1.3.6.1.4.1.2785.2.4.3.1.1.24 | acLogicalDs3ConfigFarEndEquipCode | 0 | 0 | This is the Far End Equipment Identification code that describes the specific piece of equipment. It is sent within the Path Ide… |
| 1.3.6.1.4.1.2785.2.4.3.1.1.25 | acLogicalDs3ConfigFarEndLocationIDCode | 0 | 0 | This is the Far End Location Identification code that describes the specific location of the equipment. It is sent within the P… |
| 1.3.6.1.4.1.2785.2.4.3.1.1.26 | acLogicalDs3ConfigFarEndFrameIDCode | 0 | 0 | This is the Far End Frame Identification code that identifies where the equipment is located within a building at a given locatio… |
| 1.3.6.1.4.1.2785.2.4.3.1.1.27 | acLogicalDs3ConfigFarEndUnitCode | 0 | 0 | This is the Far End code that identifies the equipment location within a bay. It is sent within the Path Identification Message… |
| 1.3.6.1.4.1.2785.2.4.3.1.1.28 | acLogicalDs3ConfigFarEndFacilityIDCode | 0 | 0 | This code identifies a specific Far End DS3 path. It is sent within the Path Identification Message (C-bits) from the remote en… |