This variable indicates what type of code is being sent across
the DS3 interface by the device. Setting this variable causes
the interface to begin sending the code requested.
The values mean:
ds3SendNoCode
sending looped or normal data
ds3SendLineCode
sending a request for a line loopback
ds3SendPayloadCode
sending a request for a payload loopback
(i.e., all DS1s in a DS3 frame)
ds3SendResetCode
sending a loopback deactivation request
ds3SendTestPattern
sending a test pattern.
Parsed from file lport_ds3.mib.txt
Company: None
Module: APPIAN-LPORT-DS3-MIB
This variable indicates what type of code is being sent across
the DS3 interface by the device. Setting this variable causes
the interface to begin sending the code requested.
The values mean:
ds3SendNoCode
sending looped or normal data
ds3SendLineCode
sending a request for a line loopback
ds3SendPayloadCode
sending a request for a payload loopback
(i.e., all DS1s in a DS3 frame)
ds3SendResetCode
sending a loopback deactivation request
ds3SendTestPattern
sending a test pattern.
Parsed from file APPIAN-LPORT-DS3-MIB.mib
Module: APPIAN-LPORT-DS3-MIB
Vendor: Tecnopro SA
Module: APPIAN-LPORT-DS3-MIB
[Automatically extracted from oidview.com]
acLogicalDs3ConfigSendCode OBJECT-TYPE SYNTAX INTEGER { ds3SendNoCode(1), ds3SendLineCode(2), ds3SendPayloadCode(3), ds3SendResetCode(4), ds3SendTestPattern(5) } MAX-ACCESS read-create STATUS current DESCRIPTION "This variable indicates what type of code is being sent across the DS3 interface by the device. Setting this variable causes the interface to begin sending the code requested. The values mean: ds3SendNoCode sending looped or normal data ds3SendLineCode sending a request for a line loopback ds3SendPayloadCode sending a request for a payload loopback (i.e., all DS1s in a DS3 frame) ds3SendResetCode sending a loopback deactivation request ds3SendTestPattern sending a test pattern." DEFVAL { ds3SendNoCode } ::= { acLogicalDs3ConfigEntry 12 }
acLogicalDs3ConfigSendCode OBJECT-TYPE SYNTAX INTEGER { ds3SendNoCode(1), ds3SendLineCode(2), ds3SendPayloadCode(3), ds3SendResetCode(4), ds3SendTestPattern(5) } MAX-ACCESS read-create STATUS current DESCRIPTION "This variable indicates what type of code is being sent across the DS3 interface by the device. Setting this variable causes the interface to begin sending the code requested. The values mean: ds3SendNoCode sending looped or normal data ds3SendLineCode sending a request for a line loopback ds3SendPayloadCode sending a request for a payload loopback (i.e., all DS1s in a DS3 frame) ds3SendResetCode sending a loopback deactivation request ds3SendTestPattern sending a test pattern." DEFVAL { ds3SendNoCode } ::= { acLogicalDs3ConfigEntry 12 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.2785.2.4.3.1.1.1 | acLogicalDs3ConfigNodeId | 0 | 0 | The node id is the id for this specific node in the OSAP ring. |
| 1.3.6.1.4.1.2785.2.4.3.1.1.2 | acLogicalDs3ConfigIndex | 0 | 0 | This value for this object is equal to the value of index from the Time Slot Table that this DS3 corresponds. The number can be … |
| 1.3.6.1.4.1.2785.2.4.3.1.1.3 | acLogicalDs3ConfigAdminStatus | 0 | 0 | Appian Administrative Status attribute used to set the provisioning state as either activate(1), inactivate(2) or delete(3). Re… |
| 1.3.6.1.4.1.2785.2.4.3.1.1.4 | acLogicalDs3ConfigTimeElapsedInterval | 0 | 0 | The number of seconds that have elapsed since the beginning of the near end current error measurement period. If, for some reaso… |
| 1.3.6.1.4.1.2785.2.4.3.1.1.5 | acLogicalDs3ConfigValidIntervals | 0 | 0 | The number of previous near end intervals for which data was collected. The value will be 96 unless the interface was brought on… |
| 1.3.6.1.4.1.2785.2.4.3.1.1.6 | acLogicalDs3ConfigTimeElapsedDay | 0 | 0 | The number of seconds that have elapsed since the beginning of the near end current day error measurement period. If, for some r… |
| 1.3.6.1.4.1.2785.2.4.3.1.1.7 | acLogicalDs3ConfigValidDays | 0 | 0 | The number of previous near end intervals for which data was collected. The value will be 30 unless the interface was brought on… |
| 1.3.6.1.4.1.2785.2.4.3.1.1.8 | acLogicalDs3ConfigTimeElapsedFarEndInterval | 0 | 0 | The number of seconds that have elapsed since the beginning of the far end current error-measurement period. If, for some reason… |
| 1.3.6.1.4.1.2785.2.4.3.1.1.9 | acLogicalDs3ConfigValidFarEndIntervals | 0 | 0 | The number of previous far end intervals for which data was collected. The value will be 96 unless the interface was brought onl… |
| 1.3.6.1.4.1.2785.2.4.3.1.1.10 | acLogicalDs3ConfigTimeElapsedFarEndDay | 0 | 0 | The number of seconds that have elapsed since the beginning of the far end current day error measurement period. If, for some re… |
| 1.3.6.1.4.1.2785.2.4.3.1.1.11 | acLogicalDs3ConfigValidFarEndDays | 0 | 0 | The number of previous far end days for which data was collected. The value will be 30 unless the interface was brought online wi… |
| 1.3.6.1.4.1.2785.2.4.3.1.1.13 | acLogicalDs3ConfigCircuitIdentifier | 0 | 0 | This variable contains the transmission vendor's circuit identifier, for the purpose of facilitating troubleshooting. |
| 1.3.6.1.4.1.2785.2.4.3.1.1.14 | acLogicalDs3ConfigLoopbackConfig | 0 | 0 | This variable represents the desired loopback configuration of the DS3 interface. The values mean: ds3NoLoop Not in the loopback st… |
| 1.3.6.1.4.1.2785.2.4.3.1.1.15 | acLogicalDs3ConfigLineStatus | 0 | 0 | This variable indicates the Line Status of the interface. It contains loopback state information and failure state information. … |
| 1.3.6.1.4.1.2785.2.4.3.1.1.16 | acLogicalDs3ConfigTransmitClockSource | 0 | 0 | The source of Transmit Clock. For logicalDs3, the clock source will be throughTiming. loopTiming indicates that the recovered rec… |
| 1.3.6.1.4.1.2785.2.4.3.1.1.17 | acLogicalDs3ConfigInvalidIntervals | 0 | 0 | The number of intervals in the range from 0 to acLogicalDs3ConfigValidIntervals for which no data is available. This object will … |
| 1.3.6.1.4.1.2785.2.4.3.1.1.18 | acLogicalDs3ConfigInvalidDays | 0 | 0 | The number of days in the range from 0 to acLogicalDs3ConfigValidDays for which no data is available. This object will typicall… |
| 1.3.6.1.4.1.2785.2.4.3.1.1.19 | acLogicalDs3ConfigInvalidFarEndIntervals | 0 | 0 | The number of intervals in the range from 0 to acLogicalDs3ConfigValidFarEndIntervals for which no data is available. This object… |
| 1.3.6.1.4.1.2785.2.4.3.1.1.20 | acLogicalDs3ConfigInvalidFarEndDays | 0 | 0 | The number of days in the range from 0 to acLogicalDs3ConfigValidFarEndDays for which no data is available. This object will typi… |
| 1.3.6.1.4.1.2785.2.4.3.1.1.21 | acLogicalDs3ConfigLineStatusLastChange | 0 | 0 | The value of MIB II's sysUpTime object at the time this DS3 entered its current line status state. If the current state was ente… |
| 1.3.6.1.4.1.2785.2.4.3.1.1.22 | acLogicalDs3ConfigLineStatusChangeTrapEnable | 0 | 0 | Indicates whether acDs3ConfigLineStatusChange traps should be generated for this interface. |
| 1.3.6.1.4.1.2785.2.4.3.1.1.23 | acLogicalDs3ConfigLoopbackStatus | 0 | 0 | This variable represents the current state of the loopback on the DS3 interface. It contains information about loopbacks establi… |
| 1.3.6.1.4.1.2785.2.4.3.1.1.24 | acLogicalDs3ConfigFarEndEquipCode | 0 | 0 | This is the Far End Equipment Identification code that describes the specific piece of equipment. It is sent within the Path Ide… |
| 1.3.6.1.4.1.2785.2.4.3.1.1.25 | acLogicalDs3ConfigFarEndLocationIDCode | 0 | 0 | This is the Far End Location Identification code that describes the specific location of the equipment. It is sent within the P… |
| 1.3.6.1.4.1.2785.2.4.3.1.1.26 | acLogicalDs3ConfigFarEndFrameIDCode | 0 | 0 | This is the Far End Frame Identification code that identifies where the equipment is located within a building at a given locatio… |
| 1.3.6.1.4.1.2785.2.4.3.1.1.27 | acLogicalDs3ConfigFarEndUnitCode | 0 | 0 | This is the Far End code that identifies the equipment location within a bay. It is sent within the Path Identification Message… |
| 1.3.6.1.4.1.2785.2.4.3.1.1.28 | acLogicalDs3ConfigFarEndFacilityIDCode | 0 | 0 | This code identifies a specific Far End DS3 path. It is sent within the Path Identification Message (C-bits) from the remote en… |