A number identifying where the card on which this port is located
was built.
Parsed from file plaintree.mib.txt
Company: None
Module: SWITCH-MIB
A number identifying where the card on which this port is located
was built.
Parsed from file SWITCH-MIB.mib
Module: SWITCH-MIB
Vendor: PlainTree Systems Inc.
Module: SWITCH-MIB
[Automatically extracted from oidview.com]
portPlaceOfManufacture OBJECT-TYPE SYNTAX INTEGER { Ottawa (1) } ACCESS read-only STATUS mandatory DESCRIPTION "A number identifying where the card on which this port is located was built." ::= { portEntry 4 }
portPlaceOfManufacture OBJECT-TYPE SYNTAX INTEGER { ottawa (1) } ACCESS read-only STATUS mandatory DESCRIPTION "A number identifying where the card on which this port is located was built." ::= { portEntry 4 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.295.3.2.1.2.1.1 | portIndex | 0 | 0 | The number of the port to which the management information applies. |
| 1.3.6.1.4.1.295.3.2.1.2.1.2 | portProductCode | 0 | 0 | An ASCII string giving the product code of the card on which this port is located. |
| 1.3.6.1.4.1.295.3.2.1.2.1.3 | portSerialNumber | 0 | 0 | An ASCII string giving the serial number of the card on which this port is located. |
| 1.3.6.1.4.1.295.3.2.1.2.1.5 | portDateOfManufacture | 0 | 0 | An ASCII string giving the date of manufacture of the card on which this port is located. |
| 1.3.6.1.4.1.295.3.2.1.2.1.6 | portState | 0 | 0 | An ASCII string giving the port's operational state. |
| 1.3.6.1.4.1.295.3.2.1.2.1.7 | portHighSensitivity | 0 | 0 | This variable is only valid if the port is an Ethernet port. If this variable is set to TRUE (1), the receiver of the Ethernet NI… |
| 1.3.6.1.4.1.295.3.2.1.2.1.8 | restoreFddiMibDefaults, portRestoreFddiMibDefaults | 0 | 0 | This variable is ony valid if the port is an FDDI station. Setting this variable to TRUE (1) causes the agent to restore the defa… |
| 1.3.6.1.4.1.295.3.2.1.2.1.9 | translateAllEthertypes, portTranslateAllEthertypes | 0 | 0 | This variable is only valid if the port is an FDDI port. If this variable is set to TRUE (1), the Bridge Tunnel Encapsulation Pro… |
| 1.3.6.1.4.1.295.3.2.1.2.1.10 | portTxFrames | 0 | 0 | This counter is incremented by one for each frame transmitted to the network segment attached to the port. |
| 1.3.6.1.4.1.295.3.2.1.2.1.11 | portRxFrames | 0 | 0 | This counter is incremented by one for each valid frame received from the network segment attached to the port. |
| 1.3.6.1.4.1.295.3.2.1.2.1.12 | portFcsErrors | 0 | 0 | This counter is incremented by one for each received frame which failed its FCS check. |
| 1.3.6.1.4.1.295.3.2.1.2.1.13 | portFilterDiscards | 0 | 0 | The number of frames received on this port which have been discarded due to the filtering action of the port's bridge circuit. |
| 1.3.6.1.4.1.295.3.2.1.2.1.14 | portDelayExceededDiscards | 0 | 0 | The number of frames discarded by this port due to excessive transit delay through the unit. It reports the same value as the o… |
| 1.3.6.1.4.1.295.3.2.1.2.1.15 | portMtuExceededDiscards | 0 | 0 | The number of frames discarded by this port due to excessive size. It is the same value reported in the object dot1dBasePortMtuEx… |
| 1.3.6.1.4.1.295.3.2.1.2.1.16 | portFddiTooLongNonIpFrames | 0 | 0 | The number of unfragmentable (non-IP) frames greater than ethernet length (1514 bytes) discarded by this port. This object is v… |
| 1.3.6.1.4.1.295.3.2.1.2.1.17 | portConnected | 0 | 0 | The variable is TRUE (1) if the port is connected to a network segment. The variable is FALSE (0) if the port is not connected t… |
| 1.3.6.1.4.1.295.3.2.1.2.1.18 | portError | 0 | 0 | The variable is TRUE (1) if the port error lamp is illuminated. The variable is FALSE (0) if the port error lamp is extinguished. |
| 1.3.6.1.4.1.295.3.2.1.2.1.19 | portBpeEnabled | 0 | 0 | Setting this variable to TRUE (1) causes the bridge protocol engine to perform the Spanning Tree Protocol on the specified port … |
| 1.3.6.1.4.1.295.3.2.1.2.1.20 | portFastEtherTxValidBytes | 0 | 0 | This counter is incremented by one for each byte of every valid frame transmitted to the network segment attached to the port. |
| 1.3.6.1.4.1.295.3.2.1.2.1.21 | portFastEtherRxValidBytes | 0 | 0 | This counter is incremented by one for each byte of every valid frame received from the network segment attached to the port. |
| 1.3.6.1.4.1.295.3.2.1.2.1.22 | portFastEtherFullDuplexEnabled | 0 | 0 | This variable is only valid if the port is a Fast Ethernet 100Base-TX port. If this variable is set to TRUE (1), the Fast Ethern… |
| 1.3.6.1.4.1.295.3.2.1.2.1.23 | portFrameLossIncidents | 0 | 0 | The number of incidents of one or more frames not forwarded to the port due to lack of resources. |
| 1.3.6.1.4.1.295.3.2.1.2.1.24 | portHardwareFunctionDescriptor | 0 | 0 | An ASCII string giving the hardware type and revision of the port |