This variable indicates what type of code is
being sent across the DS3 interface by the
device. Setting this variable causes the interface
to begin sending the code requested.
The values mean:
sendNoCode
sending looped or normal data
sendLineCode
sending a request for a line loopback
sendPayloadCode
sending a request for a payload loopback
(i.e., all DS1/E1s in a DS3/E3 frame)
sendResetCode
sending a loopback deactivation request
NOTE: This is applicable only for DS3.
Parsed from file orion_mib_v31.txt
Company: None
Module: COSINE-ORION-MIB
This object indicates whether the interface is DS3 or E3.
Parsed from file COSINE-ORION-MIB.mib
Module: COSINE-ORION-MIB
Vendor: Cosine Communications
Module: COSINE-ORION-MIB
[Automatically extracted from oidview.com]
csDs3ConfigSendCode OBJECT-TYPE SYNTAX INTEGER { ds3SendNoCode(1), ds3SendLineCode(2), ds3SendPayloadCode(3), ds3SendResetCode(4) } MAX-ACCESS read-write STATUS current DESCRIPTION "This variable indicates what type of code is being sent across the DS3 interface by the device. Setting this variable causes the interface to begin sending the code requested. The values mean: sendNoCode sending looped or normal data sendLineCode sending a request for a line loopback sendPayloadCode sending a request for a payload loopback (i.e., all DS1/E1s in a DS3/E3 frame) sendResetCode sending a loopback deactivation request NOTE: This is applicable only for DS3." ::= { csDs3ConfigEntry 20 }
csDs3ConfigDeviceType OBJECT-TYPE SYNTAX INTEGER { ds3 (1), e3 (2) } MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates whether the interface is DS3 or E3." ::= { csDs3ConfigEntry 20 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.3085.3.1.3.2.1.1.1 | csDs3ConfigSlotIndex | 0 | 0 | This object identifies the blade to which this Ds3 Port is attached. Together with csDs3ConfigModuleIndex, csDs3ConfigPortIndex… |
| 1.3.6.1.4.1.3085.3.1.3.2.1.1.2 | csDs3ConfigPortIndex, csDs3ConfigModuleIndex | 0 | 0 | This object identifies the type of of the Ds3 Module on the blade identified by csChDs3SlotIndex. |
| 1.3.6.1.4.1.3085.3.1.3.2.1.1.3 | csDs3ConfigCableLength, csDs3ConfigPortIndex | 0 | 0 | The length of the DS3 cable. NOTE: This is applicable only for DS3. |
| 1.3.6.1.4.1.3085.3.1.3.2.1.1.4 | csDs3ConfigFraming, csDs3ConfigCableLength | 0 | 0 | The length of the DS3 cable. NOTE: This is applicable only for DS3. |
| 1.3.6.1.4.1.3085.3.1.3.2.1.1.5 | csDs3ConfigMdlPath, csDs3ConfigFraming | 0 | 0 | This object controls the transmission of the MDL Path message. NOTE: This is applicable only for DS3. |
| 1.3.6.1.4.1.3085.3.1.3.2.1.1.6 | csDs3ConfigMdlIdleSig, csDs3ConfigMdlPath | 0 | 0 | This object controls the transmission of the MDL Path message. NOTE: This is applicable only for DS3. |
| 1.3.6.1.4.1.3085.3.1.3.2.1.1.7 | csDs3ConfigMdlTestSig, csDs3ConfigMdlIdleSig | 0 | 0 | This object controls the transmission of the MDL Test Signal message. NOTE: This is applicable only for DS3. |
| 1.3.6.1.4.1.3085.3.1.3.2.1.1.8 | csDs3ConfigMdlEic, csDs3ConfigMdlTestSig | 0 | 0 | This object specifies the Equipment Identification Code. NOTE: This is applicable only for DS3. |
| 1.3.6.1.4.1.3085.3.1.3.2.1.1.9 | csDs3ConfigMdlLic, csDs3ConfigMdlEic | 0 | 0 | This object specifies the Location Identification Code. NOTE: This is applicable only for DS3. |
| 1.3.6.1.4.1.3085.3.1.3.2.1.1.10 | csDs3ConfigMdlFic, csDs3ConfigMdlLic | 0 | 0 | This object specifies the Frame Identification Code. NOTE: This is applicable only for DS3. |
| 1.3.6.1.4.1.3085.3.1.3.2.1.1.11 | csDs3ConfigMdlUnit, csDs3ConfigMdlFic | 0 | 0 | This object specifies the Unit Identification Code. NOTE: This is applicable only for DS3. |
| 1.3.6.1.4.1.3085.3.1.3.2.1.1.12 | csDs3ConfigMdlPfi, csDs3ConfigMdlUnit | 0 | 0 | This object specifies the Unit Identification Code. NOTE: This is applicable only for DS3. |
| 1.3.6.1.4.1.3085.3.1.3.2.1.1.13 | csDs3ConfigMdlPort, csDs3ConfigMdlPfi | 0 | 0 | This object specifies the Port number string sent in the MDL Idle Signal message. NOTE: This is applicable only for DS3. |
| 1.3.6.1.4.1.3085.3.1.3.2.1.1.14 | csDs3ConfigMdlGenerator, csDs3ConfigMdlPort | 0 | 0 | This object specifies the Port number string sent in the MDL Idle Signal message. NOTE: This is applicable only for DS3. |
| 1.3.6.1.4.1.3085.3.1.3.2.1.1.15 | csDs3ConfigTestT1Id, csDs3ConfigMdlGenerator | 0 | 0 | This object specifies the Generator number string sent in the MDL Test Signal message. NOTE: This is applicable only for DS3. |
| 1.3.6.1.4.1.3085.3.1.3.2.1.1.16 | csDs3ConfigAdminStatus, csDs3ConfigTestT1Id | 0 | 0 | This object is used to enable/disable this Ds3 port. |
| 1.3.6.1.4.1.3085.3.1.3.2.1.1.17 | csDs3ConfigOperStatus, csDs3ConfigAdminStatus | 0 | 0 | This object is used to enable/disable this Ds3 port. |
| 1.3.6.1.4.1.3085.3.1.3.2.1.1.18 | csDs3ConfigClockSource, csDs3ConfigOperStatus | 0 | 0 | This object indicates the current operational status of this Ds3 port. |
| 1.3.6.1.4.1.3085.3.1.3.2.1.1.19 | csDs3ConfigDeviceType, csDs3ConfigClockSource | 0 | 0 | This object indicates whether the interface is DS3 or E3. |
| 1.3.6.1.4.1.3085.3.1.3.2.1.1.21 | csDs3ConfigLoopbackType, csDs3ConfigSendCode | 0 | 0 | This variable indicates what type of code is being sent across the DS3 interface by the device. Setting this variable causes the … |
| 1.3.6.1.4.1.3085.3.1.3.2.1.1.22 | csDs3ConfigLoopbackStatus, csDs3ConfigLoopbackType | 0 | 0 | This variable represents the current state of the loopback on the DS3 interface. It contains information about loopbacks establi… |
| 1.3.6.1.4.1.3085.3.1.3.2.1.1.23 | csDs3ConfigLineStatus, csDs3ConfigLoopbackStatus | 0 | 0 | This variable represents the current state of the loopback on the DS3 interface. It contains information about loopbacks establi… |
| 1.3.6.1.4.1.3085.3.1.3.2.1.1.24 | csDs3ConfigTimeElapsed, csDs3ConfigLineStatus | 0 | 0 | The number of seconds that have elapsed since the beginning of the near end current error-measurement period. If, for some reaso… |
| 1.3.6.1.4.1.3085.3.1.3.2.1.1.25 | csDs3ConfigValidInterval, csDs3ConfigTimeElapsed | 0 | 0 | The number of seconds that have elapsed since the beginning of the near end current error-measurement period. If, for some reaso… |
| 1.3.6.1.4.1.3085.3.1.3.2.1.1.26 | csDs3ConfigInvalidInterval, csDs3ConfigValidInterval | 0 | 0 | The number of intervals in the range from 0 to csDs3ConfigValidInterval for which no data is available. This object will typica… |
| 1.3.6.1.4.1.3085.3.1.3.2.1.1.27 | csDs3ConfigLineCoding, csDs3ConfigInvalidInterval | 0 | 0 | The number of intervals in the range from 0 to csDs3ConfigValidInterval for which no data is available. This object will typica… |
| 1.3.6.1.4.1.3085.3.1.3.2.1.1.28 | csDs3ConfigNationalBit, csDs3ConfigLineCoding | 0 | 0 | Bit 12 of the E3 G.751 frame. NOTE: This is applicable only for E3. |
| 1.3.6.1.4.1.3085.3.1.3.2.1.1.29 | csDs3ConfigNationalBit | 0 | 0 | Bit 12 of the E3 G.751 frame. NOTE: This is applicable only for E3. |