This variable indicates the Line Status of the interface.
It contains loopback state information and failure state
information. The csDs3ConfigLineStatus is a bit map
represented as a sum, therefore, it can represent multiple
failures and a loopback (see csDs3ConfigLoopbackStatus object
for the type of loopback) simultaneously.
The ds3NoAlarm must be set if and only if no other flag is set.
If the ds3LoopbackState bit is set, the loopback in effect
can be determined from the csDs3ConfigLoopbackStatus object.
The various bit positions are:
0 ds3NoAlarm No alarm present
1 ds3RcvRAIFailure Receiving Yellow/Remote
Alarm Indication
2 ds3XmitRAIAlarm Transmitting Yellow/Remote
Alarm Indication
3 ds3RcvAIS Receiving AIS failure state
4 ds3XmitAIS Transmitting AIS
5 ds3LOF Receiving LOF failure state
6 ds3LOS Receiving LOS failure state
7 ds3LoopbackState Looping the received signal
8 ds3RcvTestCode Receiving a Test Pattern
9 ds3OtherFailure any line status not defined
here
10 ds3UnavailSigState Near End in Unavailable Signal
State
11 ds3NetEquipOOS Carrier Equipment Out of Service
Parsed from file orion_mib_v31.txt
Company: None
Module: COSINE-ORION-MIB
This variable represents the current state of the
loopback on the DS3 interface. It contains
information about loopbacks established by a
manager and remotely from the far end.
The csDs3ConfigLoopbackStatus is a bit map represented
as a sum, therefore is can represent multiple
loopbacks simultaneously.
The various bit positions are:
1 ds3NoLoopback
2 ds3NearEndPayloadLoopback
4 ds3NearEndLineLoopback
8 ds3NearEndOtherLoopback
16 ds3NearEndInwardLoopback
32 ds3FarEndPayloadLoopback
64 ds3FarEndLineLoopback
Parsed from file COSINE-ORION-MIB.mib
Module: COSINE-ORION-MIB
Vendor: Cosine Communications
Module: COSINE-ORION-MIB
[Automatically extracted from oidview.com]
csDs3ConfigLineStatus OBJECT-TYPE SYNTAX INTEGER (1..4095) MAX-ACCESS read-only STATUS current DESCRIPTION "This variable indicates the Line Status of the interface. It contains loopback state information and failure state information. The csDs3ConfigLineStatus is a bit map represented as a sum, therefore, it can represent multiple failures and a loopback (see csDs3ConfigLoopbackStatus object for the type of loopback) simultaneously. The ds3NoAlarm must be set if and only if no other flag is set. If the ds3LoopbackState bit is set, the loopback in effect can be determined from the csDs3ConfigLoopbackStatus object. The various bit positions are: 0 ds3NoAlarm No alarm present 1 ds3RcvRAIFailure Receiving Yellow/Remote Alarm Indication 2 ds3XmitRAIAlarm Transmitting Yellow/Remote Alarm Indication 3 ds3RcvAIS Receiving AIS failure state 4 ds3XmitAIS Transmitting AIS 5 ds3LOF Receiving LOF failure state 6 ds3LOS Receiving LOS failure state 7 ds3LoopbackState Looping the received signal 8 ds3RcvTestCode Receiving a Test Pattern 9 ds3OtherFailure any line status not defined here 10 ds3UnavailSigState Near End in Unavailable Signal State 11 ds3NetEquipOOS Carrier Equipment Out of Service" ::= { csDs3ConfigEntry 23 }
csDs3ConfigLoopbackStatus OBJECT-TYPE SYNTAX INTEGER (1..127) MAX-ACCESS read-only STATUS current DESCRIPTION "This variable represents the current state of the loopback on the DS3 interface. It contains information about loopbacks established by a manager and remotely from the far end. The csDs3ConfigLoopbackStatus is a bit map represented as a sum, therefore is can represent multiple loopbacks simultaneously. The various bit positions are: 1 ds3NoLoopback 2 ds3NearEndPayloadLoopback 4 ds3NearEndLineLoopback 8 ds3NearEndOtherLoopback 16 ds3NearEndInwardLoopback 32 ds3FarEndPayloadLoopback 64 ds3FarEndLineLoopback " DEFVAL { 1 } ::= { csDs3ConfigEntry 23 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.3085.3.1.3.2.1.1.1 | csDs3ConfigSlotIndex | 0 | 0 | This object identifies the blade to which this Ds3 Port is attached. Together with csDs3ConfigModuleIndex, csDs3ConfigPortIndex… |
| 1.3.6.1.4.1.3085.3.1.3.2.1.1.2 | csDs3ConfigPortIndex, csDs3ConfigModuleIndex | 0 | 0 | This object identifies the type of of the Ds3 Module on the blade identified by csChDs3SlotIndex. |
| 1.3.6.1.4.1.3085.3.1.3.2.1.1.3 | csDs3ConfigCableLength, csDs3ConfigPortIndex | 0 | 0 | The length of the DS3 cable. NOTE: This is applicable only for DS3. |
| 1.3.6.1.4.1.3085.3.1.3.2.1.1.4 | csDs3ConfigFraming, csDs3ConfigCableLength | 0 | 0 | The length of the DS3 cable. NOTE: This is applicable only for DS3. |
| 1.3.6.1.4.1.3085.3.1.3.2.1.1.5 | csDs3ConfigMdlPath, csDs3ConfigFraming | 0 | 0 | This object controls the transmission of the MDL Path message. NOTE: This is applicable only for DS3. |
| 1.3.6.1.4.1.3085.3.1.3.2.1.1.6 | csDs3ConfigMdlIdleSig, csDs3ConfigMdlPath | 0 | 0 | This object controls the transmission of the MDL Path message. NOTE: This is applicable only for DS3. |
| 1.3.6.1.4.1.3085.3.1.3.2.1.1.7 | csDs3ConfigMdlTestSig, csDs3ConfigMdlIdleSig | 0 | 0 | This object controls the transmission of the MDL Test Signal message. NOTE: This is applicable only for DS3. |
| 1.3.6.1.4.1.3085.3.1.3.2.1.1.8 | csDs3ConfigMdlEic, csDs3ConfigMdlTestSig | 0 | 0 | This object specifies the Equipment Identification Code. NOTE: This is applicable only for DS3. |
| 1.3.6.1.4.1.3085.3.1.3.2.1.1.9 | csDs3ConfigMdlLic, csDs3ConfigMdlEic | 0 | 0 | This object specifies the Location Identification Code. NOTE: This is applicable only for DS3. |
| 1.3.6.1.4.1.3085.3.1.3.2.1.1.10 | csDs3ConfigMdlFic, csDs3ConfigMdlLic | 0 | 0 | This object specifies the Frame Identification Code. NOTE: This is applicable only for DS3. |
| 1.3.6.1.4.1.3085.3.1.3.2.1.1.11 | csDs3ConfigMdlUnit, csDs3ConfigMdlFic | 0 | 0 | This object specifies the Unit Identification Code. NOTE: This is applicable only for DS3. |
| 1.3.6.1.4.1.3085.3.1.3.2.1.1.12 | csDs3ConfigMdlPfi, csDs3ConfigMdlUnit | 0 | 0 | This object specifies the Unit Identification Code. NOTE: This is applicable only for DS3. |
| 1.3.6.1.4.1.3085.3.1.3.2.1.1.13 | csDs3ConfigMdlPort, csDs3ConfigMdlPfi | 0 | 0 | This object specifies the Port number string sent in the MDL Idle Signal message. NOTE: This is applicable only for DS3. |
| 1.3.6.1.4.1.3085.3.1.3.2.1.1.14 | csDs3ConfigMdlGenerator, csDs3ConfigMdlPort | 0 | 0 | This object specifies the Port number string sent in the MDL Idle Signal message. NOTE: This is applicable only for DS3. |
| 1.3.6.1.4.1.3085.3.1.3.2.1.1.15 | csDs3ConfigTestT1Id, csDs3ConfigMdlGenerator | 0 | 0 | This object specifies the Generator number string sent in the MDL Test Signal message. NOTE: This is applicable only for DS3. |
| 1.3.6.1.4.1.3085.3.1.3.2.1.1.16 | csDs3ConfigAdminStatus, csDs3ConfigTestT1Id | 0 | 0 | This object is used to enable/disable this Ds3 port. |
| 1.3.6.1.4.1.3085.3.1.3.2.1.1.17 | csDs3ConfigOperStatus, csDs3ConfigAdminStatus | 0 | 0 | This object is used to enable/disable this Ds3 port. |
| 1.3.6.1.4.1.3085.3.1.3.2.1.1.18 | csDs3ConfigClockSource, csDs3ConfigOperStatus | 0 | 0 | This object indicates the current operational status of this Ds3 port. |
| 1.3.6.1.4.1.3085.3.1.3.2.1.1.19 | csDs3ConfigDeviceType, csDs3ConfigClockSource | 0 | 0 | This object indicates whether the interface is DS3 or E3. |
| 1.3.6.1.4.1.3085.3.1.3.2.1.1.20 | csDs3ConfigSendCode, csDs3ConfigDeviceType | 0 | 0 | This object indicates whether the interface is DS3 or E3. |
| 1.3.6.1.4.1.3085.3.1.3.2.1.1.21 | csDs3ConfigLoopbackType, csDs3ConfigSendCode | 0 | 0 | This variable indicates what type of code is being sent across the DS3 interface by the device. Setting this variable causes the … |
| 1.3.6.1.4.1.3085.3.1.3.2.1.1.22 | csDs3ConfigLoopbackStatus, csDs3ConfigLoopbackType | 0 | 0 | This variable represents the current state of the loopback on the DS3 interface. It contains information about loopbacks establi… |
| 1.3.6.1.4.1.3085.3.1.3.2.1.1.24 | csDs3ConfigTimeElapsed, csDs3ConfigLineStatus | 0 | 0 | The number of seconds that have elapsed since the beginning of the near end current error-measurement period. If, for some reaso… |
| 1.3.6.1.4.1.3085.3.1.3.2.1.1.25 | csDs3ConfigValidInterval, csDs3ConfigTimeElapsed | 0 | 0 | The number of seconds that have elapsed since the beginning of the near end current error-measurement period. If, for some reaso… |
| 1.3.6.1.4.1.3085.3.1.3.2.1.1.26 | csDs3ConfigInvalidInterval, csDs3ConfigValidInterval | 0 | 0 | The number of intervals in the range from 0 to csDs3ConfigValidInterval for which no data is available. This object will typica… |
| 1.3.6.1.4.1.3085.3.1.3.2.1.1.27 | csDs3ConfigLineCoding, csDs3ConfigInvalidInterval | 0 | 0 | The number of intervals in the range from 0 to csDs3ConfigValidInterval for which no data is available. This object will typica… |
| 1.3.6.1.4.1.3085.3.1.3.2.1.1.28 | csDs3ConfigNationalBit, csDs3ConfigLineCoding | 0 | 0 | Bit 12 of the E3 G.751 frame. NOTE: This is applicable only for E3. |
| 1.3.6.1.4.1.3085.3.1.3.2.1.1.29 | csDs3ConfigNationalBit | 0 | 0 | Bit 12 of the E3 G.751 frame. NOTE: This is applicable only for E3. |