The number of intervals in the range from 0 to csDs3ConfigValidInterval
for which no data is available. This object will typically be zero
except in cases where the data for some intervals are not available
(e.g., in proxy situations).
Parsed from file orion_mib_v31.txt
Company: None
Module: COSINE-ORION-MIB
The number of previous near end intervals for which data was
collected. The value will be 96 unless the interface was
brought online within the last 24 hours, in which case the
value will be the number of complete 15 minute near end
intervals since the interface has been online. In the case
where the agent is a proxy, it is possible that some intervals
are unavailable. In this case, this interval is the maximum
interval number for which data is available.
Parsed from file COSINE-ORION-MIB.mib
Module: COSINE-ORION-MIB
Vendor: Cosine Communications
Module: COSINE-ORION-MIB
[Automatically extracted from oidview.com]
csDs3ConfigInvalidInterval OBJECT-TYPE SYNTAX INTEGER (1..96) MAX-ACCESS read-only STATUS current DESCRIPTION "The number of intervals in the range from 0 to csDs3ConfigValidInterval for which no data is available. This object will typically be zero except in cases where the data for some intervals are not available (e.g., in proxy situations)." ::= { csDs3ConfigEntry 26 }
csDs3ConfigValidInterval OBJECT-TYPE SYNTAX INTEGER (1..96) MAX-ACCESS read-only STATUS current DESCRIPTION "The number of previous near end intervals for which data was collected. The value will be 96 unless the interface was brought online within the last 24 hours, in which case the value will be the number of complete 15 minute near end intervals since the interface has been online. In the case where the agent is a proxy, it is possible that some intervals are unavailable. In this case, this interval is the maximum interval number for which data is available." ::= { csDs3ConfigEntry 26 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.3085.3.1.3.2.1.1.1 | csDs3ConfigSlotIndex | 0 | 0 | This object identifies the blade to which this Ds3 Port is attached. Together with csDs3ConfigModuleIndex, csDs3ConfigPortIndex… |
| 1.3.6.1.4.1.3085.3.1.3.2.1.1.2 | csDs3ConfigPortIndex, csDs3ConfigModuleIndex | 0 | 0 | This object identifies the type of of the Ds3 Module on the blade identified by csChDs3SlotIndex. |
| 1.3.6.1.4.1.3085.3.1.3.2.1.1.3 | csDs3ConfigCableLength, csDs3ConfigPortIndex | 0 | 0 | The length of the DS3 cable. NOTE: This is applicable only for DS3. |
| 1.3.6.1.4.1.3085.3.1.3.2.1.1.4 | csDs3ConfigFraming, csDs3ConfigCableLength | 0 | 0 | The length of the DS3 cable. NOTE: This is applicable only for DS3. |
| 1.3.6.1.4.1.3085.3.1.3.2.1.1.5 | csDs3ConfigMdlPath, csDs3ConfigFraming | 0 | 0 | This object controls the transmission of the MDL Path message. NOTE: This is applicable only for DS3. |
| 1.3.6.1.4.1.3085.3.1.3.2.1.1.6 | csDs3ConfigMdlIdleSig, csDs3ConfigMdlPath | 0 | 0 | This object controls the transmission of the MDL Path message. NOTE: This is applicable only for DS3. |
| 1.3.6.1.4.1.3085.3.1.3.2.1.1.7 | csDs3ConfigMdlTestSig, csDs3ConfigMdlIdleSig | 0 | 0 | This object controls the transmission of the MDL Test Signal message. NOTE: This is applicable only for DS3. |
| 1.3.6.1.4.1.3085.3.1.3.2.1.1.8 | csDs3ConfigMdlEic, csDs3ConfigMdlTestSig | 0 | 0 | This object specifies the Equipment Identification Code. NOTE: This is applicable only for DS3. |
| 1.3.6.1.4.1.3085.3.1.3.2.1.1.9 | csDs3ConfigMdlLic, csDs3ConfigMdlEic | 0 | 0 | This object specifies the Location Identification Code. NOTE: This is applicable only for DS3. |
| 1.3.6.1.4.1.3085.3.1.3.2.1.1.10 | csDs3ConfigMdlFic, csDs3ConfigMdlLic | 0 | 0 | This object specifies the Frame Identification Code. NOTE: This is applicable only for DS3. |
| 1.3.6.1.4.1.3085.3.1.3.2.1.1.11 | csDs3ConfigMdlUnit, csDs3ConfigMdlFic | 0 | 0 | This object specifies the Unit Identification Code. NOTE: This is applicable only for DS3. |
| 1.3.6.1.4.1.3085.3.1.3.2.1.1.12 | csDs3ConfigMdlPfi, csDs3ConfigMdlUnit | 0 | 0 | This object specifies the Unit Identification Code. NOTE: This is applicable only for DS3. |
| 1.3.6.1.4.1.3085.3.1.3.2.1.1.13 | csDs3ConfigMdlPort, csDs3ConfigMdlPfi | 0 | 0 | This object specifies the Port number string sent in the MDL Idle Signal message. NOTE: This is applicable only for DS3. |
| 1.3.6.1.4.1.3085.3.1.3.2.1.1.14 | csDs3ConfigMdlGenerator, csDs3ConfigMdlPort | 0 | 0 | This object specifies the Port number string sent in the MDL Idle Signal message. NOTE: This is applicable only for DS3. |
| 1.3.6.1.4.1.3085.3.1.3.2.1.1.15 | csDs3ConfigTestT1Id, csDs3ConfigMdlGenerator | 0 | 0 | This object specifies the Generator number string sent in the MDL Test Signal message. NOTE: This is applicable only for DS3. |
| 1.3.6.1.4.1.3085.3.1.3.2.1.1.16 | csDs3ConfigAdminStatus, csDs3ConfigTestT1Id | 0 | 0 | This object is used to enable/disable this Ds3 port. |
| 1.3.6.1.4.1.3085.3.1.3.2.1.1.17 | csDs3ConfigOperStatus, csDs3ConfigAdminStatus | 0 | 0 | This object is used to enable/disable this Ds3 port. |
| 1.3.6.1.4.1.3085.3.1.3.2.1.1.18 | csDs3ConfigClockSource, csDs3ConfigOperStatus | 0 | 0 | This object indicates the current operational status of this Ds3 port. |
| 1.3.6.1.4.1.3085.3.1.3.2.1.1.19 | csDs3ConfigDeviceType, csDs3ConfigClockSource | 0 | 0 | This object indicates whether the interface is DS3 or E3. |
| 1.3.6.1.4.1.3085.3.1.3.2.1.1.20 | csDs3ConfigSendCode, csDs3ConfigDeviceType | 0 | 0 | This object indicates whether the interface is DS3 or E3. |
| 1.3.6.1.4.1.3085.3.1.3.2.1.1.21 | csDs3ConfigLoopbackType, csDs3ConfigSendCode | 0 | 0 | This variable indicates what type of code is being sent across the DS3 interface by the device. Setting this variable causes the … |
| 1.3.6.1.4.1.3085.3.1.3.2.1.1.22 | csDs3ConfigLoopbackStatus, csDs3ConfigLoopbackType | 0 | 0 | This variable represents the current state of the loopback on the DS3 interface. It contains information about loopbacks establi… |
| 1.3.6.1.4.1.3085.3.1.3.2.1.1.23 | csDs3ConfigLineStatus, csDs3ConfigLoopbackStatus | 0 | 0 | This variable represents the current state of the loopback on the DS3 interface. It contains information about loopbacks establi… |
| 1.3.6.1.4.1.3085.3.1.3.2.1.1.24 | csDs3ConfigTimeElapsed, csDs3ConfigLineStatus | 0 | 0 | The number of seconds that have elapsed since the beginning of the near end current error-measurement period. If, for some reaso… |
| 1.3.6.1.4.1.3085.3.1.3.2.1.1.25 | csDs3ConfigValidInterval, csDs3ConfigTimeElapsed | 0 | 0 | The number of seconds that have elapsed since the beginning of the near end current error-measurement period. If, for some reaso… |
| 1.3.6.1.4.1.3085.3.1.3.2.1.1.27 | csDs3ConfigLineCoding, csDs3ConfigInvalidInterval | 0 | 0 | The number of intervals in the range from 0 to csDs3ConfigValidInterval for which no data is available. This object will typica… |
| 1.3.6.1.4.1.3085.3.1.3.2.1.1.28 | csDs3ConfigNationalBit, csDs3ConfigLineCoding | 0 | 0 | Bit 12 of the E3 G.751 frame. NOTE: This is applicable only for E3. |
| 1.3.6.1.4.1.3085.3.1.3.2.1.1.29 | csDs3ConfigNationalBit | 0 | 0 | Bit 12 of the E3 G.751 frame. NOTE: This is applicable only for E3. |