An entry in the ncm T1 Configuration table.
Parsed from file ncmgeneric.mib.txt
Company: None
Module: VERILINK-ENTERPRISE-NCMGENERIC-MIB
An entry in the ncm T1 Configuration table.
Parsed from file VERILINK-ENTERPRISE-NCMGENERIC-MIB.mib
Module: VERILINK-ENTERPRISE-NCMGENERIC-MIB
Vendor: Verilink Corp
Module: VERILINK-ENTERPRISE-NCMGENERIC-MIB
[Automatically extracted from oidview.com]
ncmT1ConfigEntry OBJECT-TYPE SYNTAX NcmT1ConfigEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the ncm T1 Configuration table." INDEX { ncmT1ConfigNIDIndex, ncmT1LineIndex } ::= { ncmT1ConfigTable 1 }
ncmT1ConfigEntry OBJECT-TYPE SYNTAX NcmT1ConfigEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the ncm T1 Configuration table." INDEX { ncmT1ConfigNIDIndex, ncmT1LineIndex } ::= { ncmT1ConfigTable 1 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.321.1.3012.1017.1.1 | ncmT1ConfigNIDIndex | 0 | 0 | This object is the identifier of the node id index. |
| 1.3.6.1.4.1.321.1.3012.1017.1.2 | ncmT1LineIndex | 0 | 0 | This object is the identifier of an Interface on a managed device. If there is an ifEntry that is directly associated with this … |
| 1.3.6.1.4.1.321.1.3012.1017.1.3 | ncmT1CRC6 | 0 | 0 | This variable indicates Whether CRC6 is enabled or not |
| 1.3.6.1.4.1.321.1.3012.1017.1.4 | ncmT1FramingFormat | 0 | 0 | This variable indicates the variety of Line implementing this circuit. The type of circuit affects the number of bits per… |
| 1.3.6.1.4.1.321.1.3012.1017.1.5 | ncmT1LineCoding | 0 | 0 | This variable describes the variety of Zero Code Suppression used on the link, which in turn affects a number of its chara… |
| 1.3.6.1.4.1.321.1.3012.1017.1.6 | ncmT1FramingType | 0 | 0 | This variable indicates the framing type in this T1 port, i.e., CAS-BR, CAS-CC, CCS |
| 1.3.6.1.4.1.321.1.3012.1017.1.7 | ncmT1FDL | 0 | 0 | The variable specifies the Disable/Enable of the fdl State. |
| 1.3.6.1.4.1.321.1.3012.1017.1.8 | ncmT1InbandISDNEnableDisable | 0 | 0 | This variable indicates the Inband, ISDN enable and disable options. |
| 1.3.6.1.4.1.321.1.3012.1017.1.9 | ncmT1EnableNetLoopback | 0 | 0 | The variable specifies the Disable/Enable of the Network intiated Loopback. |
| 1.3.6.1.4.1.321.1.3012.1017.1.10 | ncmT1EnableNetOnesDensity | 0 | 0 | The variable specifies the Disable/Enable of the Network One's Density. |
| 1.3.6.1.4.1.321.1.3012.1017.1.11 | ncmT1DensityPattern | 0 | 0 | This variable indicates what type of density network is being sent on the port or line by the device. It only has significance on… |
| 1.3.6.1.4.1.321.1.3012.1017.1.12 | ncmT1EnableRepeaterLpbkTimeout | 0 | 0 | The variable specifies whether repeater loopback is enabled or not. |
| 1.3.6.1.4.1.321.1.3012.1017.1.13 | ncmT1RepeaterLoopbackTimeout | 0 | 0 | The variable specifies the timeout value in seconds for repeater loopback. |
| 1.3.6.1.4.1.321.1.3012.1017.1.14 | ncmT1UserAlarmDeclareTime | 0 | 0 | The variable specifies the User ncmAlarm declaration Time in seconds. |
| 1.3.6.1.4.1.321.1.3012.1017.1.15 | ncmT1State | 0 | 0 | The variable specifies whether port state is in service or not. |
| 1.3.6.1.4.1.321.1.3012.1017.1.16 | ncmT1NetworkLBOEQLIZ | 0 | 0 | This variable indicates either (1) for long haul using, i.e., is 0 , -7.5db, -15db or -22.5db.[pvt]; or (2) for short haul or port … |
| 1.3.6.1.4.1.321.1.3012.1017.1.17 | ncmT1TimeSlot | 0 | 0 | This variable represents the timeslots used for the given port directly from the hardware crosspoint switch for example 1-10 if s… |
| 1.3.6.1.4.1.321.1.3012.1017.1.18 | ncmT1TimeSlotSelect | 0 | 0 | This variable indicates the number which is choosed for the inband/isdn timeslot. |