This object is the identifier of an Interface
on a managed device. If there is an ifEntry
that is directly associated with this and
only this DS1 interface, it should have the
same value as ifIndex. Otherwise, the value
exceeds ifNumber, and is a unique identifier
following this rule: inside interfaces (e.g.,
equipment side) with even numbers and outside
interfaces (e.g., network side) with odd
numbers.
Parsed from file ncmgeneric.mib.txt
Company: None
Module: VERILINK-ENTERPRISE-NCMGENERIC-MIB
This object is the identifier of an Interface
on a managed device. If there is an ifEntry
that is directly associated with this and
only this DS1 interface, it should have the
same value as ifIndex. Otherwise, the value
exceeds ifNumber, and is a unique identifier
following this rule: inside interfaces (e.g.,
equipment side) with even numbers and outside
interfaces (e.g., network side) with odd
numbers.
Parsed from file VERILINK-ENTERPRISE-NCMGENERIC-MIB.mib
Module: VERILINK-ENTERPRISE-NCMGENERIC-MIB
Vendor: Verilink Corp
Module: VERILINK-ENTERPRISE-NCMGENERIC-MIB
[Automatically extracted from oidview.com]
ncmT1LineIndex OBJECT-TYPE SYNTAX INTEGER (1..'7fffffff'h) ACCESS read-only STATUS mandatory DESCRIPTION "This object is the identifier of an Interface on a managed device. If there is an ifEntry that is directly associated with this and only this DS1 interface, it should have the same value as ifIndex. Otherwise, the value exceeds ifNumber, and is a unique identifier following this rule: inside interfaces (e.g., equipment side) with even numbers and outside interfaces (e.g., network side) with odd numbers." ::= { ncmT1ConfigEntry 2 }
ncmT1LineIndex OBJECT-TYPE SYNTAX INTEGER (1..'7fffffff'h) ACCESS read-only STATUS mandatory DESCRIPTION "This object is the identifier of an Interface on a managed device. If there is an ifEntry that is directly associated with this and only this DS1 interface, it should have the same value as ifIndex. Otherwise, the value exceeds ifNumber, and is a unique identifier following this rule: inside interfaces (e.g., equipment side) with even numbers and outside interfaces (e.g., network side) with odd numbers." ::= { ncmT1ConfigEntry 2 }
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.321.1.3012.1017.1.1 | ncmT1ConfigNIDIndex | 0 | 0 | This object is the identifier of the node id index. |
1.3.6.1.4.1.321.1.3012.1017.1.3 | ncmT1CRC6 | 0 | 0 | This variable indicates Whether CRC6 is enabled or not |
1.3.6.1.4.1.321.1.3012.1017.1.4 | ncmT1FramingFormat | 0 | 0 | This variable indicates the variety of Line implementing this circuit. The type of circuit affects the number of bits per… |
1.3.6.1.4.1.321.1.3012.1017.1.5 | ncmT1LineCoding | 0 | 0 | This variable describes the variety of Zero Code Suppression used on the link, which in turn affects a number of its chara… |
1.3.6.1.4.1.321.1.3012.1017.1.6 | ncmT1FramingType | 0 | 0 | This variable indicates the framing type in this T1 port, i.e., CAS-BR, CAS-CC, CCS |
1.3.6.1.4.1.321.1.3012.1017.1.7 | ncmT1FDL | 0 | 0 | The variable specifies the Disable/Enable of the fdl State. |
1.3.6.1.4.1.321.1.3012.1017.1.8 | ncmT1InbandISDNEnableDisable | 0 | 0 | This variable indicates the Inband, ISDN enable and disable options. |
1.3.6.1.4.1.321.1.3012.1017.1.9 | ncmT1EnableNetLoopback | 0 | 0 | The variable specifies the Disable/Enable of the Network intiated Loopback. |
1.3.6.1.4.1.321.1.3012.1017.1.10 | ncmT1EnableNetOnesDensity | 0 | 0 | The variable specifies the Disable/Enable of the Network One's Density. |
1.3.6.1.4.1.321.1.3012.1017.1.11 | ncmT1DensityPattern | 0 | 0 | This variable indicates what type of density network is being sent on the port or line by the device. It only has significance on… |
1.3.6.1.4.1.321.1.3012.1017.1.12 | ncmT1EnableRepeaterLpbkTimeout | 0 | 0 | The variable specifies whether repeater loopback is enabled or not. |
1.3.6.1.4.1.321.1.3012.1017.1.13 | ncmT1RepeaterLoopbackTimeout | 0 | 0 | The variable specifies the timeout value in seconds for repeater loopback. |
1.3.6.1.4.1.321.1.3012.1017.1.14 | ncmT1UserAlarmDeclareTime | 0 | 0 | The variable specifies the User ncmAlarm declaration Time in seconds. |
1.3.6.1.4.1.321.1.3012.1017.1.15 | ncmT1State | 0 | 0 | The variable specifies whether port state is in service or not. |
1.3.6.1.4.1.321.1.3012.1017.1.16 | ncmT1NetworkLBOEQLIZ | 0 | 0 | This variable indicates either (1) for long haul using, i.e., is 0 , -7.5db, -15db or -22.5db.[pvt]; or (2) for short haul or port … |
1.3.6.1.4.1.321.1.3012.1017.1.17 | ncmT1TimeSlot | 0 | 0 | This variable represents the timeslots used for the given port directly from the hardware crosspoint switch for example 1-10 if s… |
1.3.6.1.4.1.321.1.3012.1017.1.18 | ncmT1TimeSlotSelect | 0 | 0 | This variable indicates the number which is choosed for the inband/isdn timeslot. |