This variable describes the variety of Zero
Code Suppression used on the link, which in
turn affects a number of its characteristics.
B8ZS refers to the use of a specified pat-
tern of normal bits and bipolar violations
which are used to replace a sequence of eight
zero bits.
AMI refers to a mode wherein no zero code
suppression is present and the line encoding
does not solve the problem directly. In this
application, the higher layer must provide data
which meets or exceeds the pulse density re-
quirements, such as inverting HDLC data.
Parsed from file ncmgeneric.mib.txt
Company: None
Module: VERILINK-ENTERPRISE-NCMGENERIC-MIB
This variable describes the variety of Zero
Code Suppression used on the link, which in
turn affects a number of its characteristics.
B8ZS refers to the use of a specified pat-
tern of normal bits and bipolar violations
which are used to replace a sequence of eight
zero bits.
AMI refers to a mode wherein no zero code
suppression is present and the line encoding
does not solve the problem directly. In this
application, the higher layer must provide data
which meets or exceeds the pulse density re-
quirements, such as inverting HDLC data.
Parsed from file VERILINK-ENTERPRISE-NCMGENERIC-MIB.mib
Module: VERILINK-ENTERPRISE-NCMGENERIC-MIB
Vendor: Verilink Corp
Module: VERILINK-ENTERPRISE-NCMGENERIC-MIB
[Automatically extracted from oidview.com]
ncmT1LineCoding OBJECT-TYPE SYNTAX INTEGER { aMI (1), b8ZS (2) } ACCESS read-write STATUS mandatory DESCRIPTION "This variable describes the variety of Zero Code Suppression used on the link, which in turn affects a number of its characteristics. B8ZS refers to the use of a specified pat- tern of normal bits and bipolar violations which are used to replace a sequence of eight zero bits. AMI refers to a mode wherein no zero code suppression is present and the line encoding does not solve the problem directly. In this application, the higher layer must provide data which meets or exceeds the pulse density re- quirements, such as inverting HDLC data." ::= { ncmT1ConfigEntry 5 }
ncmT1LineCoding OBJECT-TYPE SYNTAX INTEGER { aMI (1), b8ZS (2) } ACCESS read-write STATUS mandatory DESCRIPTION "This variable describes the variety of Zero Code Suppression used on the link, which in turn affects a number of its characteristics. B8ZS refers to the use of a specified pat- tern of normal bits and bipolar violations which are used to replace a sequence of eight zero bits. AMI refers to a mode wherein no zero code suppression is present and the line encoding does not solve the problem directly. In this application, the higher layer must provide data which meets or exceeds the pulse density re- quirements, such as inverting HDLC data." ::= { ncmT1ConfigEntry 5 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.321.1.3012.1017.1.1 | ncmT1ConfigNIDIndex | 0 | 0 | This object is the identifier of the node id index. |
| 1.3.6.1.4.1.321.1.3012.1017.1.2 | ncmT1LineIndex | 0 | 0 | This object is the identifier of an Interface on a managed device. If there is an ifEntry that is directly associated with this … |
| 1.3.6.1.4.1.321.1.3012.1017.1.3 | ncmT1CRC6 | 0 | 0 | This variable indicates Whether CRC6 is enabled or not |
| 1.3.6.1.4.1.321.1.3012.1017.1.4 | ncmT1FramingFormat | 0 | 0 | This variable indicates the variety of Line implementing this circuit. The type of circuit affects the number of bits per… |
| 1.3.6.1.4.1.321.1.3012.1017.1.6 | ncmT1FramingType | 0 | 0 | This variable indicates the framing type in this T1 port, i.e., CAS-BR, CAS-CC, CCS |
| 1.3.6.1.4.1.321.1.3012.1017.1.7 | ncmT1FDL | 0 | 0 | The variable specifies the Disable/Enable of the fdl State. |
| 1.3.6.1.4.1.321.1.3012.1017.1.8 | ncmT1InbandISDNEnableDisable | 0 | 0 | This variable indicates the Inband, ISDN enable and disable options. |
| 1.3.6.1.4.1.321.1.3012.1017.1.9 | ncmT1EnableNetLoopback | 0 | 0 | The variable specifies the Disable/Enable of the Network intiated Loopback. |
| 1.3.6.1.4.1.321.1.3012.1017.1.10 | ncmT1EnableNetOnesDensity | 0 | 0 | The variable specifies the Disable/Enable of the Network One's Density. |
| 1.3.6.1.4.1.321.1.3012.1017.1.11 | ncmT1DensityPattern | 0 | 0 | This variable indicates what type of density network is being sent on the port or line by the device. It only has significance on… |
| 1.3.6.1.4.1.321.1.3012.1017.1.12 | ncmT1EnableRepeaterLpbkTimeout | 0 | 0 | The variable specifies whether repeater loopback is enabled or not. |
| 1.3.6.1.4.1.321.1.3012.1017.1.13 | ncmT1RepeaterLoopbackTimeout | 0 | 0 | The variable specifies the timeout value in seconds for repeater loopback. |
| 1.3.6.1.4.1.321.1.3012.1017.1.14 | ncmT1UserAlarmDeclareTime | 0 | 0 | The variable specifies the User ncmAlarm declaration Time in seconds. |
| 1.3.6.1.4.1.321.1.3012.1017.1.15 | ncmT1State | 0 | 0 | The variable specifies whether port state is in service or not. |
| 1.3.6.1.4.1.321.1.3012.1017.1.16 | ncmT1NetworkLBOEQLIZ | 0 | 0 | This variable indicates either (1) for long haul using, i.e., is 0 , -7.5db, -15db or -22.5db.[pvt]; or (2) for short haul or port … |
| 1.3.6.1.4.1.321.1.3012.1017.1.17 | ncmT1TimeSlot | 0 | 0 | This variable represents the timeslots used for the given port directly from the hardware crosspoint switch for example 1-10 if s… |
| 1.3.6.1.4.1.321.1.3012.1017.1.18 | ncmT1TimeSlotSelect | 0 | 0 | This variable indicates the number which is choosed for the inband/isdn timeslot. |