This trap indicates that the Remote Defect Indication (RDI)
is detected on the incoming (terminating) virtual path. This
trap is generated once when the virtual path is declared to be
in the active RDI state.
Parsed from file fore-switch.mib.txt
Company: None
Module: Fore-Switch-MIB
This trap indicates that the Remote Defect Indication (RDI)
is detected on the incoming (terminating) virtual path. This
trap is generated once when the virtual path is declared to be
in the active RDI state.
Parsed from file Fore-Switch-MIB.mib
Module: Fore-Switch-MIB
Vendor: Fore Systems, Inc.
Module: Fore-Switch-MIB
[Automatically extracted from oidview.com]
asxVPRDIDetected NOTIFICATION-TYPE OBJECTS { portName, pathPort, pathVPI, trapLogIndex } STATUS current DESCRIPTION "This trap indicates that the Remote Defect Indication (RDI) is detected on the incoming (terminating) virtual path. This trap is generated once when the virtual path is declared to be in the active RDI state." ::= { atmSwitch 0 1039 }
asxVPRDIDetected NOTIFICATION-TYPE OBJECTS { portName, pathPort, pathVPI, trapLogIndex } STATUS current DESCRIPTION "This trap indicates that the Remote Defect Indication (RDI) is detected on the incoming (terminating) virtual path. This trap is generated once when the virtual path is declared to be in the active RDI state." ::= { atmSwitch 0 1039 }
To many brothers! Only 100 nearest brothers are shown.
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| ... | ||||
| 1.3.6.1.4.1.326.2.2.0.1024 | asxOutputQueueCongested | 0 | 0 | This trap indicates that the output queue for the given priority has exceeded its dedicated length, and has begun overflowing int… |
| 1.3.6.1.4.1.326.2.2.0.1025 | asxOutputQueueCellLoss | 0 | 0 | This trap indicates that the output queue for the given priority has overflowed and cells have been dropped. |
| 1.3.6.1.4.1.326.2.2.0.1026 | asxExtendedModeViolation | 0 | 0 | This trap indicates that a series A or B network module was inserted into a switch board running in extended mode. Multicast wil… |
| 1.3.6.1.4.1.326.2.2.0.1027 | asxNonextendedModeWarning | 0 | 0 | This trap indicates that a series C or greater network module was inserted into a switch board running in non-extended mode. |
| 1.3.6.1.4.1.326.2.2.0.1029 | crConfMemoryOflow | 0 | 0 | This trap is generated when the allocated callrecord memory(as indicated by crMemoryAllocated) is exceeded. |
| 1.3.6.1.4.1.326.2.2.0.1030 | crXfrPrimaryXfrFailed | 0 | 0 | This trap is generated when the call record transfer to the primary host(as indicated by crXfrPrimaryUrl) fails. |
| 1.3.6.1.4.1.326.2.2.0.1031 | crXfrSecondaryXfrFailed | 0 | 0 | This trap is generated when the call record transfer to the secondary host(as indicated by crXfrSecondaryUrl) fails. |
| 1.3.6.1.4.1.326.2.2.0.1032 | crConfMemAllocFail | 0 | 0 | This trap is generated when Callrecord functionality is unable to allocate memory as specified by crMemoryAllocated. This can hap… |
| 1.3.6.1.4.1.326.2.2.0.1033 | crGeneralFailure | 0 | 0 | This trap is generated when any of the callrecord related functionality fails for any reason. One example would be when the Callr… |
| 1.3.6.1.4.1.326.2.2.0.1034 | asxDualScpSyncFailure | 0 | 0 | This trap indicates that automatic CDB synchronization is disabled due to failures. |
| 1.3.6.1.4.1.326.2.2.0.1035 | asxDualScpSwitchOver | 0 | 0 | This trap indicates that the backup SCP has taken control of the switch. |
| 1.3.6.1.4.1.326.2.2.0.1036 | asxDualScpHotSwap | 0 | 0 | This trap indicates that an SCP hotswap insertion or removal has occurred. |
| 1.3.6.1.4.1.326.2.2.0.1037 | asxVPAISDetected | 0 | 0 | This trap indicates that the Alarm Indication Signal (AIS) is detected on the incoming (terminating) virtual path. This trap is … |
| 1.3.6.1.4.1.326.2.2.0.1038 | asxVPAISCleared | 0 | 0 | This trap indicates that the Alarm Indication Signal (AIS) has been removed from the incoming (terminating) virtual path. This tr… |
| 1.3.6.1.4.1.326.2.2.0.1040 | asxVPRDICleared | 0 | 0 | This trap indicates that the Remote Defect Indication (RDI) has been removed from the incoming (terminating) virtual path. This t… |
| 1.3.6.1.4.1.326.2.2.0.1041 | asxNonextendedModeViolation | 0 | 0 | This trap indicates that a series D network module was inserted into a switch board running in non-extended mode. Multicast will… |
| 1.3.6.1.4.1.326.2.2.0.1042 | asxUnsupportedNetworkModule | 0 | 0 | This trap indicates that a unsupported network module was inserted into a switch. |
| 1.3.6.1.4.1.326.2.2.0.1043 | asxDualScpRedundancy | 0 | 0 | This trap indicates that there is a change in the state of dual SCP Redundancy. |
| 1.3.6.1.4.1.326.2.2.0.1049 | asxIpFilterViolation | 0 | 0 | An asxIpFilterViolation trap occurs when an incoming IP packet is unauthorized to enter the switch control port and has been drop… |
| 1.3.6.1.4.1.326.2.2.0.1050 | ecpOperatingModeChange | 0 | 0 | This trap indicates that the Extended Control Processor (ECP) has change operating state. |
| 1.3.6.1.4.1.326.2.2.0.1051 | esiTimingSourceChange | 0 | 0 | This trap is generated whenever the External Synchronization Interface (ESI) timing source (esiCurrentTimingRef) is changed eithe… |
| 1.3.6.1.4.1.326.2.2.0.1052 | esiTimingSourceFailed | 0 | 0 | This trap is generated whenever the External Synchronization Interface (ESI) timing source (esiCurrentTimingRef) fails. |
| 1.3.6.1.4.1.326.2.2.0.1053 | q2931AFRejectKnown | 0 | 0 | This trap is generated whenever any q2931 UNI with Address Filtering enabled rejects a Setup request because the request matched … |
| 1.3.6.1.4.1.326.2.2.0.1054 | q2931AFRejectUnknown | 0 | 0 | This trap is generated whenever any q2931 UNI with Address Filtering enabled rejects a Setup request because the address matched … |
| 1.3.6.1.4.1.326.2.2.0.1061 | q2931CreationFailure | 0 | 0 | This trap is generated whenever a switch fails to create a UNI. This is most likely due to a resource limitation on the switch. |
| 1.3.6.1.4.1.326.2.2.0.1068 | asxPsCurrentDown | 0 | 0 | This trap alerts that one ATM switch power supply had a curent failure. The power supply that failed is identified by the power s… |
| 1.3.6.1.4.1.326.2.2.0.1069 | asxPsCurrentUp | 0 | 0 | This trap alerts that one ATM switch power supply that had a curent failure is now up. The power supply that is back up is identi… |
| 1.3.6.1.4.1.326.2.2.0.1070 | asxPs5VoltDown | 0 | 0 | This trap alerts that one ATM switch power supply had a +5V failure. The power supply that failed is identified by the power supp… |
| 1.3.6.1.4.1.326.2.2.0.1071 | asxPs5VoltUp | 0 | 0 | This trap alerts that one ATM switch power supply that had a +5V failure is now up. The power supply that is back up is identifie… |
| 1.3.6.1.4.1.326.2.2.0.1072 | asxSwitchLoginDetected | 0 | 0 | An asxSwitchLoginDetected trap signifies that a user logged in on the switch. |
| 1.3.6.1.4.1.326.2.2.0.1073 | asxSwitchLoginFailed | 0 | 0 | An asxSwitchLoginFailed trap signifies that a user's attempt to log in on the switch failed. |
| 1.3.6.1.4.1.326.2.2.0.1074 | pnniTdbGuardbandResrvFail | 0 | 0 | This trap is generated when guardband memory reserve for any of the PNNI TDB(Topology Database) related functionalites like creat… |
| 1.3.6.1.4.1.326.2.2.0.1075 | pnniTdbInconsistentState | 0 | 0 | This trap is generated when PNNI TDB(Topology Database) is in an unrecoverable error condition due to MALLOC and other TDB relate… |
| 1.3.6.1.4.1.326.2.2.0.1076 | ecpStandbyFailed | 0 | 0 | This trap is generated whenever the Standby Timing Control Module (TCM) appears to haved failed. This is determined by lack of r… |
| 1.3.6.1.4.1.326.2.2.0.1077 | asxShmem2OutputQueueCongested | 0 | 0 | This trap indicates that the output queue for the given priority has exceeded its dedicated length, and has begun overflowing int… |
| 1.3.6.1.4.1.326.2.2.0.1078 | asxShmem2OutputQueueCellLoss | 0 | 0 | This trap indicates that the output queue for the given priority has overflowed and cells have been dropped. |
| 1.3.6.1.4.1.326.2.2.0.1080 | fabricLvl3Lookup | 0 | 0 | This trap is generated when a fabric detects excessive level 3 lookup errors. The level 3 lookup count is read every second. If t… |
| 1.3.6.1.4.1.326.2.2.0.1081 | fabricCorrectedLookup | 0 | 0 | This trap is generated when the SCP detects inconsistant information in the HDCOMP lookup. The switch has corrected the bad infor… |
| ... | ||||