This trap is generated whenever any q2931 UNI with
Address Filtering enabled rejects a Setup request
because the address matched no template.
The variables sent in the trap identify the
source and destination UNI for the call.
Parsed from file fore-switch.mib.txt
Company: None
Module: Fore-Switch-MIB
This trap is generated whenever any q2931 UNI with
Address Filtering enabled rejects a Setup request
because the address matched no template.
The variables sent in the trap identify the
source and destination UNI for the call.
Parsed from file Fore-Switch-MIB.mib
Module: Fore-Switch-MIB
Vendor: Fore Systems, Inc.
Module: Fore-Switch-MIB
[Automatically extracted from oidview.com]
q2931AFRejectUnknown NOTIFICATION-TYPE OBJECTS { portName, pathPort, pathVPI, portName, opathPort, opathVPI, trapLogIndex } STATUS current DESCRIPTION "This trap is generated whenever any q2931 UNI with Address Filtering enabled rejects a Setup request because the address matched no template. The variables sent in the trap identify the source and destination UNI for the call." ::= { atmSwitch 0 1054 }
q2931AFRejectUnknown NOTIFICATION-TYPE OBJECTS { portName, pathPort, pathVPI, portName, opathPort, opathVPI, trapLogIndex } STATUS current DESCRIPTION "This trap is generated whenever any q2931 UNI with Address Filtering enabled rejects a Setup request because the address matched no template. The variables sent in the trap identify the source and destination UNI for the call." ::= { atmSwitch 0 1054 }
To many brothers! Only 100 nearest brothers are shown.
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| ... | ||||
| 1.3.6.1.4.1.326.2.2.0.1024 | asxOutputQueueCongested | 0 | 0 | This trap indicates that the output queue for the given priority has exceeded its dedicated length, and has begun overflowing int… |
| 1.3.6.1.4.1.326.2.2.0.1025 | asxOutputQueueCellLoss | 0 | 0 | This trap indicates that the output queue for the given priority has overflowed and cells have been dropped. |
| 1.3.6.1.4.1.326.2.2.0.1026 | asxExtendedModeViolation | 0 | 0 | This trap indicates that a series A or B network module was inserted into a switch board running in extended mode. Multicast wil… |
| 1.3.6.1.4.1.326.2.2.0.1027 | asxNonextendedModeWarning | 0 | 0 | This trap indicates that a series C or greater network module was inserted into a switch board running in non-extended mode. |
| 1.3.6.1.4.1.326.2.2.0.1029 | crConfMemoryOflow | 0 | 0 | This trap is generated when the allocated callrecord memory(as indicated by crMemoryAllocated) is exceeded. |
| 1.3.6.1.4.1.326.2.2.0.1030 | crXfrPrimaryXfrFailed | 0 | 0 | This trap is generated when the call record transfer to the primary host(as indicated by crXfrPrimaryUrl) fails. |
| 1.3.6.1.4.1.326.2.2.0.1031 | crXfrSecondaryXfrFailed | 0 | 0 | This trap is generated when the call record transfer to the secondary host(as indicated by crXfrSecondaryUrl) fails. |
| 1.3.6.1.4.1.326.2.2.0.1032 | crConfMemAllocFail | 0 | 0 | This trap is generated when Callrecord functionality is unable to allocate memory as specified by crMemoryAllocated. This can hap… |
| 1.3.6.1.4.1.326.2.2.0.1033 | crGeneralFailure | 0 | 0 | This trap is generated when any of the callrecord related functionality fails for any reason. One example would be when the Callr… |
| 1.3.6.1.4.1.326.2.2.0.1034 | asxDualScpSyncFailure | 0 | 0 | This trap indicates that automatic CDB synchronization is disabled due to failures. |
| 1.3.6.1.4.1.326.2.2.0.1035 | asxDualScpSwitchOver | 0 | 0 | This trap indicates that the backup SCP has taken control of the switch. |
| 1.3.6.1.4.1.326.2.2.0.1036 | asxDualScpHotSwap | 0 | 0 | This trap indicates that an SCP hotswap insertion or removal has occurred. |
| 1.3.6.1.4.1.326.2.2.0.1037 | asxVPAISDetected | 0 | 0 | This trap indicates that the Alarm Indication Signal (AIS) is detected on the incoming (terminating) virtual path. This trap is … |
| 1.3.6.1.4.1.326.2.2.0.1038 | asxVPAISCleared | 0 | 0 | This trap indicates that the Alarm Indication Signal (AIS) has been removed from the incoming (terminating) virtual path. This tr… |
| 1.3.6.1.4.1.326.2.2.0.1039 | asxVPRDIDetected | 0 | 0 | This trap indicates that the Remote Defect Indication (RDI) is detected on the incoming (terminating) virtual path. This trap is… |
| 1.3.6.1.4.1.326.2.2.0.1040 | asxVPRDICleared | 0 | 0 | This trap indicates that the Remote Defect Indication (RDI) has been removed from the incoming (terminating) virtual path. This t… |
| 1.3.6.1.4.1.326.2.2.0.1041 | asxNonextendedModeViolation | 0 | 0 | This trap indicates that a series D network module was inserted into a switch board running in non-extended mode. Multicast will… |
| 1.3.6.1.4.1.326.2.2.0.1042 | asxUnsupportedNetworkModule | 0 | 0 | This trap indicates that a unsupported network module was inserted into a switch. |
| 1.3.6.1.4.1.326.2.2.0.1043 | asxDualScpRedundancy | 0 | 0 | This trap indicates that there is a change in the state of dual SCP Redundancy. |
| 1.3.6.1.4.1.326.2.2.0.1049 | asxIpFilterViolation | 0 | 0 | An asxIpFilterViolation trap occurs when an incoming IP packet is unauthorized to enter the switch control port and has been drop… |
| 1.3.6.1.4.1.326.2.2.0.1050 | ecpOperatingModeChange | 0 | 0 | This trap indicates that the Extended Control Processor (ECP) has change operating state. |
| 1.3.6.1.4.1.326.2.2.0.1051 | esiTimingSourceChange | 0 | 0 | This trap is generated whenever the External Synchronization Interface (ESI) timing source (esiCurrentTimingRef) is changed eithe… |
| 1.3.6.1.4.1.326.2.2.0.1052 | esiTimingSourceFailed | 0 | 0 | This trap is generated whenever the External Synchronization Interface (ESI) timing source (esiCurrentTimingRef) fails. |
| 1.3.6.1.4.1.326.2.2.0.1053 | q2931AFRejectKnown | 0 | 0 | This trap is generated whenever any q2931 UNI with Address Filtering enabled rejects a Setup request because the request matched … |
| 1.3.6.1.4.1.326.2.2.0.1061 | q2931CreationFailure | 0 | 0 | This trap is generated whenever a switch fails to create a UNI. This is most likely due to a resource limitation on the switch. |
| 1.3.6.1.4.1.326.2.2.0.1068 | asxPsCurrentDown | 0 | 0 | This trap alerts that one ATM switch power supply had a curent failure. The power supply that failed is identified by the power s… |
| 1.3.6.1.4.1.326.2.2.0.1069 | asxPsCurrentUp | 0 | 0 | This trap alerts that one ATM switch power supply that had a curent failure is now up. The power supply that is back up is identi… |
| 1.3.6.1.4.1.326.2.2.0.1070 | asxPs5VoltDown | 0 | 0 | This trap alerts that one ATM switch power supply had a +5V failure. The power supply that failed is identified by the power supp… |
| 1.3.6.1.4.1.326.2.2.0.1071 | asxPs5VoltUp | 0 | 0 | This trap alerts that one ATM switch power supply that had a +5V failure is now up. The power supply that is back up is identifie… |
| 1.3.6.1.4.1.326.2.2.0.1072 | asxSwitchLoginDetected | 0 | 0 | An asxSwitchLoginDetected trap signifies that a user logged in on the switch. |
| 1.3.6.1.4.1.326.2.2.0.1073 | asxSwitchLoginFailed | 0 | 0 | An asxSwitchLoginFailed trap signifies that a user's attempt to log in on the switch failed. |
| 1.3.6.1.4.1.326.2.2.0.1074 | pnniTdbGuardbandResrvFail | 0 | 0 | This trap is generated when guardband memory reserve for any of the PNNI TDB(Topology Database) related functionalites like creat… |
| 1.3.6.1.4.1.326.2.2.0.1075 | pnniTdbInconsistentState | 0 | 0 | This trap is generated when PNNI TDB(Topology Database) is in an unrecoverable error condition due to MALLOC and other TDB relate… |
| 1.3.6.1.4.1.326.2.2.0.1076 | ecpStandbyFailed | 0 | 0 | This trap is generated whenever the Standby Timing Control Module (TCM) appears to haved failed. This is determined by lack of r… |
| 1.3.6.1.4.1.326.2.2.0.1077 | asxShmem2OutputQueueCongested | 0 | 0 | This trap indicates that the output queue for the given priority has exceeded its dedicated length, and has begun overflowing int… |
| 1.3.6.1.4.1.326.2.2.0.1078 | asxShmem2OutputQueueCellLoss | 0 | 0 | This trap indicates that the output queue for the given priority has overflowed and cells have been dropped. |
| 1.3.6.1.4.1.326.2.2.0.1080 | fabricLvl3Lookup | 0 | 0 | This trap is generated when a fabric detects excessive level 3 lookup errors. The level 3 lookup count is read every second. If t… |
| 1.3.6.1.4.1.326.2.2.0.1081 | fabricCorrectedLookup | 0 | 0 | This trap is generated when the SCP detects inconsistant information in the HDCOMP lookup. The switch has corrected the bad infor… |
| 1.3.6.1.4.1.326.2.2.0.1090 | spvcRerouteInitiated | 0 | 0 | This trap is sent when a SPVC is being re-routed due to a better path being found. |
| 1.3.6.1.4.1.326.2.2.0.1091 | asxQ2931Down | 0 | 0 | This trap is generated whenever UNI signalling goes down. |
| 1.3.6.1.4.1.326.2.2.0.1092 | asxQ2931Up | 0 | 0 | This trap is generated whenever UNI signalling goes up. |
| 1.3.6.1.4.1.326.2.2.0.1093 | asxFabricDown | 0 | 0 | An asxFabricDown trap signifies that the sending protocol entity recognizes a failure in one of the ATM Switch fabric, that is id… |
| 1.3.6.1.4.1.326.2.2.0.1094 | asxFabricUp | 0 | 0 | An asxFabricUp trap signifies that the sending protocol entity recognizes a new operational ATM Switch fabric, that is identified… |
| 1.3.6.1.4.1.326.2.2.0.1095 | asxQ2931CallClearing | 0 | 0 | This trap is generated whenever calls are cleared in a signalling interface for the following reasons. * Carrier loss * SONET alar… |
| ... | ||||