The F4 CP sends this trap when the CLR0 threshold is hit.
Parsed from file fore-oam.mib.txt
Company: marconi
Module: Fore-OAM-MIB
asxVPOAMCLR0HitThreshold NOTIFICATION-TYPE OBJECTS { portName, pathPort, pathVPI } STATUS current DESCRIPTION "The F4 CP sends this trap when the CLR0 threshold is hit." ::= { atmSwitch 0 2064 }
To many brothers! Only 100 nearest brothers are shown.
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| ... | ||||
| 1.3.6.1.4.1.326.2.2.0.2014 | asxServiceCategoryOutputQueueCellLoss | 0 | 0 | This trap indicates that the output queue for the given service category has overflowed and cells have been dropped. |
| 1.3.6.1.4.1.326.2.2.0.2015 | pnniNormalToOverloadTransition | 0 | 0 | This trap is generated on transition from the normal state to the overload state. |
| 1.3.6.1.4.1.326.2.2.0.2016 | pnniOverloadToNormalTransition | 0 | 0 | This trap is generated on transition from the overload to the normal state. |
| 1.3.6.1.4.1.326.2.2.0.2017 | apsSwitchOver | 0 | 0 | This trap alerts that an aps switchover has occurred and the active port is identified by the tuple {hwPortBoard, hwPortModule, h… |
| 1.3.6.1.4.1.326.2.2.0.2018 | redundancyFabricSwitchover | 0 | 0 | This trap reports the change of active fabric due to an automatic or revertive switchover. The fabric identified by the trap vari… |
| 1.3.6.1.4.1.326.2.2.0.2019 | apsModeMismatchDeclare | 0 | 0 | This trap alerts that an aps mode mismatch has occurred on aps group. |
| 1.3.6.1.4.1.326.2.2.0.2020 | pnniPmpRerouteInitiated | 0 | 0 | This trap is sent when a party is being re-routed due to a better path being found or if a reroute is requested using a AMI comm… |
| 1.3.6.1.4.1.326.2.2.0.2021 | pnniPmpSpvcUp | 0 | 0 | This trap is send when a pmp SPVC call is established. This trap is only sent if pnniSpvcTrapMode is failure or all. |
| 1.3.6.1.4.1.326.2.2.0.2022 | pnniPmpSpvcDown | 0 | 0 | This trap is sent when a pmp SPVC call is cleared. The pnniSpvcSrcDownReason indicates if the call was cleared due to a better ro… |
| 1.3.6.1.4.1.326.2.2.0.2023 | pnniPmpSpvcFail | 0 | 0 | This trap is sent when a SPVC call that is down fails to get connected on 16 consecutive attempts. This trap is only sent if pnni… |
| 1.3.6.1.4.1.326.2.2.0.2024 | pnniSpvxRGroupSwover | 0 | 0 | This trap is sent when a automatic switch over occurs in a SPVC Redundancy group that has automatic PVC switch over enabled. |
| 1.3.6.1.4.1.326.2.2.0.2025 | asxSVXCPStateTransferFailed | 0 | 0 | This trap is sent when the SVx/SPVx Preservation module is unable to transfer call and interface state information to the Standby… |
| 1.3.6.1.4.1.326.2.2.0.2026 | asxSVXCPStateTransferRestarted | 0 | 0 | This trap is sent when the SVx/SPVx Preservation module has restarted its transfer of call and interface state information to the… |
| 1.3.6.1.4.1.326.2.2.0.2027 | asxSVXCPStateDroppedCall | 0 | 0 | This trap is sent when the SVx/SPVx Preservation module has insufficient memory to store one or more calls during its transfer of… |
| 1.3.6.1.4.1.326.2.2.0.2028 | apsModeMismatchClear | 0 | 0 | This trap alerts that an aps mode mismatch has cleared on aps group. |
| 1.3.6.1.4.1.326.2.2.0.2040 | elecredSwitchOver | 0 | 0 | This trap alerts that an electrical redundancy switchover has occurred and the active port is identified by the tuple {hwPortBoa… |
| 1.3.6.1.4.1.326.2.2.0.2050 | asxVPOAMAISDetected | 0 | 0 | This trap indicates that the Alarm Indication Signal (AIS) is detected on the incoming (terminating) virtual path. This trap is … |
| 1.3.6.1.4.1.326.2.2.0.2051 | asxVPOAMAISCleared | 0 | 0 | This trap indicates that the Alarm Indication Signal (AIS) has been removed from the incoming (terminating) virtual path. This tr… |
| 1.3.6.1.4.1.326.2.2.0.2052 | asxVPOAMRDIDetected | 0 | 0 | This trap indicates that the Remote Defect Indication (RDI) is detected on the incoming (terminating) virtual path. This trap is… |
| 1.3.6.1.4.1.326.2.2.0.2053 | asxVPOAMRDICleared | 0 | 0 | This trap indicates that the Remote Defect Indication (RDI) has been removed from the incoming (terminating) virtual path. This t… |
| 1.3.6.1.4.1.326.2.2.0.2054 | asxVCOAMAISDetected | 0 | 0 | This trap indicates that the Alarm Indication Signal (AIS) is detected on the incoming virtual channel. This trap is generated o… |
| 1.3.6.1.4.1.326.2.2.0.2055 | asxVCOAMAISCleared | 0 | 0 | This trap indicates that the Alarm Indication Signal (AIS) has been removed from the incoming virtual channel. This trap is gene… |
| 1.3.6.1.4.1.326.2.2.0.2056 | asxVCOAMRDIDetected | 0 | 0 | This trap indicates that the Remote Defect Indication (RDI) is detected on the incoming virtual channel. This trap is generated … |
| 1.3.6.1.4.1.326.2.2.0.2057 | asxVCOAMRDICleared | 0 | 0 | This trap indicates that the Remote Defect Indication (RDI) has been removed from the incoming virtual channel. This trap is gen… |
| 1.3.6.1.4.1.326.2.2.0.2058 | asxVCOAMCLR0HitThreshold | 0 | 0 | The F5 CP sends this trap when the CLR0 threshold is hit. |
| 1.3.6.1.4.1.326.2.2.0.2059 | asxVCOAMCLR1HitThreshold | 0 | 0 | The F5 CP sends this trap when the CLR1 threshold is hit. |
| 1.3.6.1.4.1.326.2.2.0.2060 | asxVCOAMCLR01HitThreshold | 0 | 0 | The F5 CP sends this trap when the CLR0+1 threshold is hit. |
| 1.3.6.1.4.1.326.2.2.0.2061 | asxVCOAMRogueCellHitThreshold | 0 | 0 | The F5 CP sends this trap when the rogue cells count threshold is hit. |
| 1.3.6.1.4.1.326.2.2.0.2062 | asxVCOAMErroredCellHitThreshold | 0 | 0 | The F5 CP sends this trap when the errored cells count threshold is hit. |
| 1.3.6.1.4.1.326.2.2.0.2063 | asxVCOAMBip16Threshold | 0 | 0 | The F5 CP sends this trap when even parity is detected in Block Error Detection Code BIP-16. Ref: ITU I.610 paragraph 10.3.1 Item… |
| 1.3.6.1.4.1.326.2.2.0.2065 | asxVPOAMCLR1HitThreshold | 0 | 0 | The F4 CP sends this trap when the CLR1 threshold is hit. |
| 1.3.6.1.4.1.326.2.2.0.2066 | asxVPOAMCLR01HitThreshold | 0 | 0 | The F4 CP sends this trap when the CLR0+1 threshold is hit. |
| 1.3.6.1.4.1.326.2.2.0.2067 | asxVPOAMRogueCellHitThreshold | 0 | 0 | The F4 CP sends this trap when the rogue cells count threshold is hit. |
| 1.3.6.1.4.1.326.2.2.0.2068 | asxVPOAMErroredCellHitThreshold | 0 | 0 | The F4 CP sends this trap when the errored cells count threshold is hit. |
| 1.3.6.1.4.1.326.2.2.0.2069 | asxVPOAMBip16Threshold | 0 | 0 | The F4 CP sends a VP trap when even parity is detected in Block Error Detection Code BIP-16. Ref: ITU I.610 paragraph 10.3.1 Item… |
| 1.3.6.1.4.1.326.2.2.0.2070 | asxVCOAMSecbrHitThreshold | 0 | 0 | The F5 CP sends this trap when the SECBR threshold is hit. |
| 1.3.6.1.4.1.326.2.2.0.2071 | asxVPOAMSecbrHitThreshold | 0 | 0 | The F4 CP sends this trap when the SECBR threshold is hit. |
| 1.3.6.1.4.1.326.2.2.0.2072 | asxVCOAMActivated | 0 | 0 | This trap indicates that a F5 CP has been activated. It also reports the status of the activation. |
| 1.3.6.1.4.1.326.2.2.0.2073 | asxVCOAMDeactivated | 0 | 0 | This trap indicates that a F5 CP has been deactivated. It also reports the status of the deactivation. |
| 1.3.6.1.4.1.326.2.2.0.2074 | asxVPOAMActivated | 0 | 0 | This trap indicates that a F4 CP has been activated. It also reports the status of the activation. |
| 1.3.6.1.4.1.326.2.2.0.2075 | asxVPOAMDeactivated | 0 | 0 | This trap indicates that a F4 CP has been deactivated. It also reports the status of the deactivation. |
| 1.3.6.1.4.1.326.2.2.0.2076 | asxVCOAMCriticalMcsnJump | 0 | 0 | The F5 CP sends this trap when there is a critical jump in MCSN received from the peer CP. This indicates a lost in some of the … |
| 1.3.6.1.4.1.326.2.2.0.2077 | asxVPOAMCriticalMcsnJump | 0 | 0 | The F4 CP sends this trap when there is a critical jump in MCSN received from the peer CP. This indicates a lost in some of the … |
| ... | ||||