This field enables and disables RMON monitoring of
certain repeater related variables in the chassis.
Set this field to 'enabled' to allow this slot to
activate alarms and report traps for variables from
the standard repeater MIB (snmpDot3RptrMgt
1.3.6.1.2.1.22) and the iTouch repeater MIB
(xRepeater 1.3.6.1.4.1.33.17).
When you set this field to 'disabled', alarms may
still be created for these repeater variables, but
no monitoring will take place for them. The alarm
state will be 'held' during this time.
Only one slot in a chassis may have this field set
to 'enabled' at any given time. Setting 'enabled'
in any one slot automatically sets it to 'disabled'
in every other slot. Repeater variable monitoring
in those slots will cease and the corresponding
alarm states will be 'held'.
Parsed from file it-rmon-mib.mib.txt
Company: None
Module: ITOUCH-RMON-MIB
This field enables and disables RMON monitoring of
certain repeater related variables in the chassis.
Set this field to 'enabled' to allow this slot to
activate alarms and report traps for variables from
the standard repeater MIB (snmpDot3RptrMgt
1.3.6.1.2.1.22) and the iTouch repeater MIB
(xRepeater 1.3.6.1.4.1.33.17).
When you set this field to 'disabled', alarms may
still be created for these repeater variables, but
no monitoring will take place for them. The alarm
state will be 'held' during this time.
Only one slot in a chassis may have this field set
to 'enabled' at any given time. Setting 'enabled'
in any one slot automatically sets it to 'disabled'
in every other slot. Repeater variable monitoring
in those slots will cease and the corresponding
alarm states will be 'held'.
Parsed from file ITOUCHHUB.mib
Module: ITOUCHHUB
xRmonRepeaterManagement OBJECT-TYPE SYNTAX INTEGER { disabled(1), enabled(2) } ACCESS read-write STATUS mandatory DESCRIPTION " This field enables and disables RMON monitoring of certain repeater related variables in the chassis. Set this field to 'enabled' to allow this slot to activate alarms and report traps for variables from the standard repeater MIB (snmpDot3RptrMgt 1.3.6.1.2.1.22) and the iTouch repeater MIB (xRepeater 1.3.6.1.4.1.33.17). When you set this field to 'disabled', alarms may still be created for these repeater variables, but no monitoring will take place for them. The alarm state will be 'held' during this time. Only one slot in a chassis may have this field set to 'enabled' at any given time. Setting 'enabled' in any one slot automatically sets it to 'disabled' in every other slot. Repeater variable monitoring in those slots will cease and the corresponding alarm states will be 'held'." DEFVAL { disabled } ::= { xRmonMonitor 7 }
Vendor: MRV Communications, In-Reach Product Division
Module: ITOUCH-RMON-MIB
[Automatically extracted from oidview.com]
xRmonRepeaterManagement OBJECT-TYPE SYNTAX INTEGER { disabled(1), enabled(2) } ACCESS read-write STATUS mandatory DESCRIPTION " This field enables and disables RMON monitoring of certain repeater related variables in the chassis. Set this field to 'enabled' to allow this slot to activate alarms and report traps for variables from the standard repeater MIB (snmpDot3RptrMgt 1.3.6.1.2.1.22) and the iTouch repeater MIB (xRepeater 1.3.6.1.4.1.33.17). When you set this field to 'disabled', alarms may still be created for these repeater variables, but no monitoring will take place for them. The alarm state will be 'held' during this time. Only one slot in a chassis may have this field set to 'enabled' at any given time. Setting 'enabled' in any one slot automatically sets it to 'disabled' in every other slot. Repeater variable monitoring in those slots will cease and the corresponding alarm states will be 'held'." DEFVAL { disabled } ::= { xRmonMonitor 7 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.33.31.1.7.0 | xRmonRepeaterManagement | 0 | 0 | None |
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.33.31.1.1 | xRmonMonitorRemote | 1 | 1 | Once an alarm is 'completed', monitoring for that variable may be distributed within an enclosure to another processor. Factors … |
| 1.3.6.1.4.1.33.31.1.2 | xRmonMonitorLocal | 1 | 1 | Once an alarm is 'completed', monitoring for that variable may be distributed within an enclosure to another processor. Factors … |
| 1.3.6.1.4.1.33.31.1.3 | xRmonLogClear | 1 | 1 | Set this field to 'execute' to delete all RMON log table entries. Setting to 'ready' has no effect. |
| 1.3.6.1.4.1.33.31.1.4 | xRmonLogTotal | 1 | 1 | This field reports the total number of RMON log entries created since the system was initialized. Clearing the log table does not… |
| 1.3.6.1.4.1.33.31.1.5 | xRmonLogLastDateTime | 1 | 1 | The local date and time of the system at the time an RMON log entry was last created. |
| 1.3.6.1.4.1.33.31.1.6 | xRmonTrapType | 1 | 1 | Use this field to specify the type of SNMP trap to generate when an alarm event occurs. The value 'standardFormat' formats the tr… |
| 1.3.6.1.4.1.33.31.1.8 | xRmonAlarmActivate | 1 | 1 | Use this field to change the states of all completed alarms to 'active' or 'inactive'. Select 'activateAll' to make all completed… |
| 1.3.6.1.4.1.33.31.1.9 | xRmonAlarmClear | 1 | 1 | Set this field to 'deleteAll' to delete all alarm table entries and their associated event entries. Setting to 'noAction' has no … |
| 1.3.6.1.4.1.33.31.1.10 | xRmonAlarmCount | 4 | 8 | None |
| 1.3.6.1.4.1.33.31.1.11 | xRmonAlarmInitAction | 1 | 1 | Use this field to specify whether all alarms read from the parameter file should be placed in the 'active' state or the 'inactive… |