Compressed output packet size - This value is used in the DSP
interface API commands to configure the DSPs for the maximum
packet size.
The valid values are 80 and 160 only.
NOTE: This object is not used currently.
In future it is applicable only if the mode is VoAAL1.
From vism 2.0.3 release onwards this object can be configured in any
mode/adaptations, but will be applicable only in aal1 adaptation.
Parsed from file CISCO-WAN-AXIPOP-MIB.mib
Module: CISCO-WAN-AXIPOP-MIB
Compressed output packet size - This value is used in the
DSP(Digital Signal Processing) interface API commands
to configure the DSPs for the maximum packet size.
The valid values are 80 and 160 only.
Compressed output packet size - This value is used in the
DSP(Digital Signal Processing) interface API commands
to configure the DSPs for the maximum packet size.
The valid values are 80 and 160 only.
Parsed from file CISCO-VISM-MODULE-MIB.my.txt
Company: None
Module: CISCO-VISM-MODULE-MIB
Compressed output packet size - This value is used in the
DSP(Digital Signal Processing) interface API commands
to configure the DSPs for the maximum packet size.
The valid values are 80 and 160 only.
vismCompCnfPacketSize OBJECT-TYPE SYNTAX INTEGER (80..160) ACCESS read-write STATUS mandatory DESCRIPTION " Compressed output packet size - This value is used in the DSP interface API commands to configure the DSPs for the maximum packet size. The valid values are 80 and 160 only. NOTE: This object is not used currently. In future it is applicable only if the mode is VoAAL1. From vism 2.0.3 release onwards this object can be configured in any mode/adaptations, but will be applicable only in aal1 adaptation. " DEFVAL { 80 } ::= { vismDspGrp 3 }
vismCompCnfPacketSize OBJECT-TYPE SYNTAX INTEGER(80|160) ACCESS read-write STATUS mandatory DESCRIPTION "Compressed output packet size - This value is used in the DSP(Digital Signal Processing) interface API commands to configure the DSPs for the maximum packet size. The valid values are 80 and 160 only." DEFVAL { 80 } ::= { vismDspGrp 3 }
Vendor: Stratacom
Module: CISCO-VISM-MODULE-MIB
[Automatically extracted from oidview.com]
vismCompCnfPacketSize OBJECT-TYPE SYNTAX Integer32 (80|160) MAX-ACCESS read-write STATUS current DESCRIPTION "Compressed output packet size - This value is used in the DSP(Digital Signal Processing) interface API commands to configure the DSPs for the maximum packet size. The valid values are 80 and 160 only. " DEFVAL { 80 } ::= { vismDspGrp 3 }
vismCompCnfPacketSize OBJECT-TYPE SYNTAX Integer32 (80|160) MAX-ACCESS read-write STATUS current DESCRIPTION "Compressed output packet size - This value is used in the DSP(Digital Signal Processing) interface API commands to configure the DSPs for the maximum packet size. The valid values are 80 and 160 only. " DEFVAL { 80 } ::= { vismDspGrp 3 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.351.110.3.17.3.3.0 | vismCompCnfPacketSize | 0 | 0 | None |
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.351.110.3.17.3.1 | vismEcanCnfIdlePattern | 1 | 1 | Echo Canceller pattern for Idle code. Mu-Law : 1 - 7f, 2 - ff, 3 - 7f or ff, 4 - f7 A-Law : 1 - None, 2 - 54, 3 - 55, 4 - Prog… |
| 1.3.6.1.4.1.351.110.3.17.3.2 | vismEcanCnfIdleDirection | 1 | 1 | Echo Canceller Idle Direction. This determines in which direction the Idle code must be present. |
| 1.3.6.1.4.1.351.110.3.17.3.4 | vismERL | 1 | 1 | This object is used to provision the return echo lost, i.e the db loss of the echo that the DSPs are supposed to cancel. |
| 1.3.6.1.4.1.351.110.3.17.3.5 | vismJitterDelayMode | 1 | 1 | This object is used to provision the jitter buffer mode to be apply to a call connection. The possible values are: 'fixed' : mea… |
| 1.3.6.1.4.1.351.110.3.17.3.6 | vismJitterInitialDelay | 1 | 1 | Defines the jitter buffer size. If the vismJitterDelayMode is set to be fixed, the jitter buffer is fixed at this value for the … |
| 1.3.6.1.4.1.351.110.3.17.3.7 | vismAdaptiveGainControl | 1 | 1 | If set to 'on', the DSP will adjust the gain of the call connection to an optimal value. |
| 1.3.6.1.4.1.351.110.3.17.3.8 | vismDspHealth | 1 | 1 | This attribute indicates the health of the DSPs. It is a percentage of the total number of DSPs that are currently functional. |
| 1.3.6.1.4.1.351.110.3.17.3.9 | vismUpspeedCodec | 1 | 1 | This object specifies the codec to be used when fax upspeed happens. The default value for this object is G.711u when the line ty… |
| 1.3.6.1.4.1.351.110.3.17.3.10 | vismPayloadType | 1 | 1 | This object specifies the payload type to be used when fax upspeed happens. IANA values (0..95) are static payload and (96..127) … |
| 1.3.6.1.4.1.351.110.3.17.3.11 | vismDSPHeartbeat | 1 | 1 | This object will specify the timer interval, DSP send a regular heartbeat messages from the DSP to the HOST Application. If the va… |
| 1.3.6.1.4.1.351.110.3.17.3.12 | vismFaxDeJitterMode | 1 | 1 | This object specifies the de-jitter mode to be used for the fax upspeed. This object is applicable only in the case of VoIP applic… |
| 1.3.6.1.4.1.351.110.3.17.3.13 | vismFaxDeJitterInitialDelay | 1 | 1 | This object defines the de-jitter buffer size for fax upspeed. If the vismFaxDeJitter Mode is set to be 'fixedWithTS' or 'fixedWi… |