vismDspGrp OBJECT IDENTIFIER ::= {vismConfig 3}
vismDspGrp OBJECT IDENTIFIER ::= { vismConfig 3 }
Vendor: Stratacom
Module: CISCO-VISM-MODULE-MIB
[Automatically extracted from oidview.com]
vismDspGrp OBJECT IDENTIFIER ::= { vismConfig 3 }
vismDspGrp OBJECT IDENTIFIER ::= { vismConfig 3 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.351.110.3.17.3.1 | vismEcanCnfIdlePattern | 1 | 1 | Echo Canceller pattern for Idle code. Mu-Law : 1 - 7f, 2 - ff, 3 - 7f or ff, 4 - f7 A-Law : 1 - None, 2 - 54, 3 - 55, 4 - Prog… |
| 1.3.6.1.4.1.351.110.3.17.3.2 | vismEcanCnfIdleDirection | 1 | 1 | Echo Canceller Idle Direction. This determines in which direction the Idle code must be present. |
| 1.3.6.1.4.1.351.110.3.17.3.3 | vismCompCnfPacketSize | 1 | 1 | Compressed output packet size - This value is used in the DSP(Digital Signal Processing) interface API commands to configure the … |
| 1.3.6.1.4.1.351.110.3.17.3.4 | vismERL | 1 | 1 | This object is used to provision the return echo lost, i.e the db loss of the echo that the DSPs are supposed to cancel. |
| 1.3.6.1.4.1.351.110.3.17.3.5 | vismJitterDelayMode | 1 | 1 | This object is used to provision the jitter buffer mode to be apply to a call connection. The possible values are: 'fixed' : mea… |
| 1.3.6.1.4.1.351.110.3.17.3.6 | vismJitterInitialDelay | 1 | 1 | Defines the jitter buffer size. If the vismJitterDelayMode is set to be fixed, the jitter buffer is fixed at this value for the … |
| 1.3.6.1.4.1.351.110.3.17.3.7 | vismAdaptiveGainControl | 1 | 1 | If set to 'on', the DSP will adjust the gain of the call connection to an optimal value. |
| 1.3.6.1.4.1.351.110.3.17.3.8 | vismDspHealth | 1 | 1 | This attribute indicates the health of the DSPs. It is a percentage of the total number of DSPs that are currently functional. |
| 1.3.6.1.4.1.351.110.3.17.3.9 | vismUpspeedCodec | 1 | 1 | This object specifies the codec to be used when fax upspeed happens. The default value for this object is G.711u when the line ty… |
| 1.3.6.1.4.1.351.110.3.17.3.10 | vismPayloadType | 1 | 1 | This object specifies the payload type to be used when fax upspeed happens. IANA values (0..95) are static payload and (96..127) … |
| 1.3.6.1.4.1.351.110.3.17.3.11 | vismDSPHeartbeat | 1 | 1 | This object will specify the timer interval, DSP send a regular heartbeat messages from the DSP to the HOST Application. If the va… |
| 1.3.6.1.4.1.351.110.3.17.3.12 | vismFaxDeJitterMode | 1 | 1 | This object specifies the de-jitter mode to be used for the fax upspeed. This object is applicable only in the case of VoIP applic… |
| 1.3.6.1.4.1.351.110.3.17.3.13 | vismFaxDeJitterInitialDelay | 1 | 1 | This object defines the de-jitter buffer size for fax upspeed. If the vismFaxDeJitter Mode is set to be 'fixedWithTS' or 'fixedWi… |
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.351.110.3.17.1 | vismIpGrp | 5 | 10 | None |
| 1.3.6.1.4.1.351.110.3.17.2 | vismVoIpGrp | 16 | 32 | None |
| 1.3.6.1.4.1.351.110.3.17.4 | vismSystemGrp | 48 | 96 | None |
| 1.3.6.1.4.1.351.110.3.17.5 | vismTrapObjGrp | 5 | 10 | None |
| 1.3.6.1.4.1.351.110.3.17.6 | vismAal2Grp | 6 | 12 | None |
| 1.3.6.1.4.1.351.110.3.17.7 | vismInteropGrp | 2 | 4 | None |