Defines the jitter buffer size. If the vismJitterDelayMode
is set to be fixed, the jitter buffer is fixed at this value
for the call. If vismJitterDelayMode is adaptive, this is
the initial jitter buffer size, and the DSP will adapt to
an optimal size.
The range 10,20,30,40,50,60,70,80,90,100 is applicable to
1.5 release only.
The range 1,5,10,15,20,25,30,35 .... is applicable from vism2.0
release onwards.
The valid range for template 1 : 1,10,20,30,40,50,60,70,80,90,100
The valid range for template 2 : 1,5,10,15,20,25,30,35,40,45,50,
55,60,65,70,75,80,85,90,95,100.
When the template of the card changes, either from template 1
to 2 or vice versa the value of this object will be implicitly
set to default value.
Parsed from file CISCO-WAN-AXIPOP-MIB.mib
Module: CISCO-WAN-AXIPOP-MIB
Defines the jitter buffer size. If the vismJitterDelayMode
is set to be fixed, the jitter buffer is fixed at this
value for the call. If vismJitterDelayMode is adaptive,
this is the initial jitter buffer size, and the DSP will
adapt to an optimal size.
The valid range for template 1 : 1,10,20,30,40,50,60,70,
80,90,100
The valid range for template 2 : 1,5,10,15,20,25,30,35,
40,45,50,55,60,65,70,
75,80,85,90,95,100.
When the template of the card changes, either from
template 1 to 2 or vice versa the value of this
object will be implicitly set to default value.
Defines the jitter buffer size. If the vismJitterDelayMode
is set to be fixed, the jitter buffer is fixed at this
value for the call. If vismJitterDelayMode is adaptive,
this is the initial jitter buffer size, and the DSP will
adapt to an optimal size.
The valid range for template 1 : 1,10,20,30,40,50,60,70,
80,90,100
The valid range for template 2 : 1,5,10,15,20,25,30,35,
40,45,50,55,60,65,70,
75,80,85,90,95,100.
When the template of the card changes, either from
template 1 to 2 or vice versa the value of this
object will be implicitly set to default value.
Parsed from file CISCO-VISM-MODULE-MIB.my.txt
Company: None
Module: CISCO-VISM-MODULE-MIB
Defines the jitter buffer size. If the vismJitterDelayMode
is set to be fixed, the jitter buffer is fixed at this
value for the call. If vismJitterDelayMode is adaptive,
this is the initial jitter buffer size, and the DSP will
adapt to an optimal size.
The valid range for template 1 : 1,10,20,30,40,50,60,70,
80,90,100
The valid range for template 2 : 1,5,10,15,20,25,30,35,
40,45,50,55,60,65,70,
75,80,85,90,95,100.
When the template of the card changes, either from
template 1 to 2 or vice versa the value of this
object will be implicitly set to default value.
vismJitterInitialDelay OBJECT-TYPE SYNTAX INTEGER { zero (1), five (5), ten (10), fifteen (15), twenty (20), twentyfive (25), thirty (30), thirtyfive (35), fourty (40), fortyfive (45), fifty (50), fiftyfive (55), sixty (60), sixtyfive (65), seventy (70), seventyfive (75), eighty (80), eightyfive (85), ninty (90), ninetyfive (95), hundred (100) } ACCESS read-write STATUS deprecated DESCRIPTION " Defines the jitter buffer size. If the vismJitterDelayMode is set to be fixed, the jitter buffer is fixed at this value for the call. If vismJitterDelayMode is adaptive, this is the initial jitter buffer size, and the DSP will adapt to an optimal size. The range 10,20,30,40,50,60,70,80,90,100 is applicable to 1.5 release only. The range 1,5,10,15,20,25,30,35 .... is applicable from vism2.0 release onwards. The valid range for template 1 : 1,10,20,30,40,50,60,70,80,90,100 The valid range for template 2 : 1,5,10,15,20,25,30,35,40,45,50, 55,60,65,70,75,80,85,90,95,100. When the template of the card changes, either from template 1 to 2 or vice versa the value of this object will be implicitly set to default value. " DEFVAL { fourty } ::= { vismDspGrp 6 }
vismJitterInitialDelay OBJECT-TYPE SYNTAX INTEGER { zero(1), five(5), ten(10), fifteen(15), twenty(20), twentyfive(25), thirty(30), thirtyfive(35), fourty(40), fortyfive(45), fifty(50), fiftyfive(55), sixty(60), sixtyfive(65), seventy(70), seventyfive(75), eighty(80), eightyfive(85), ninty(90), ninetyfive(95), hundred(100) } ACCESS read-write STATUS deprecated DESCRIPTION "Defines the jitter buffer size. If the vismJitterDelayMode is set to be fixed, the jitter buffer is fixed at this value for the call. If vismJitterDelayMode is adaptive, this is the initial jitter buffer size, and the DSP will adapt to an optimal size. The valid range for template 1 : 1,10,20,30,40,50,60,70, 80,90,100 The valid range for template 2 : 1,5,10,15,20,25,30,35, 40,45,50,55,60,65,70, 75,80,85,90,95,100. When the template of the card changes, either from template 1 to 2 or vice versa the value of this object will be implicitly set to default value." DEFVAL { fourty } ::= { vismDspGrp 6 }
Vendor: Stratacom
Module: CISCO-VISM-MODULE-MIB
[Automatically extracted from oidview.com]
vismJitterInitialDelay OBJECT-TYPE SYNTAX INTEGER { zero (1), five (5), ten (10), fifteen (15), twenty (20), twentyfive (25), thirty (30), thirtyfive (35), fourty (40), fortyfive (45), fifty (50), fiftyfive (55), sixty (60), sixtyfive (65), seventy (70), seventyfive (75), eighty (80), eightyfive (85), ninty (90), ninetyfive (95), hundred (100) } MAX-ACCESS read-write STATUS deprecated DESCRIPTION "Defines the jitter buffer size. If the vismJitterDelayMode is set to be fixed, the jitter buffer is fixed at this value for the call. If vismJitterDelayMode is adaptive, this is the initial jitter buffer size, and the DSP will adapt to an optimal size. The valid range for template 1 : 1,10,20,30,40,50,60,70, 80,90,100 The valid range for template 2 : 1,5,10,15,20,25,30,35, 40,45,50,55,60,65,70, 75,80,85,90,95,100. When the template of the card changes, either from template 1 to 2 or vice versa the value of this object will be implicitly set to default value. " DEFVAL { fourty } ::= { vismDspGrp 6 }
vismJitterInitialDelay OBJECT-TYPE SYNTAX INTEGER { zero (1), five (5), ten (10), fifteen (15), twenty (20), twentyfive (25), thirty (30), thirtyfive (35), fourty (40), fortyfive (45), fifty (50), fiftyfive (55), sixty (60), sixtyfive (65), seventy (70), seventyfive (75), eighty (80), eightyfive (85), ninty (90), ninetyfive (95), hundred (100) } MAX-ACCESS read-write STATUS deprecated DESCRIPTION "Defines the jitter buffer size. If the vismJitterDelayMode is set to be fixed, the jitter buffer is fixed at this value for the call. If vismJitterDelayMode is adaptive, this is the initial jitter buffer size, and the DSP will adapt to an optimal size. The valid range for template 1 : 1,10,20,30,40,50,60,70, 80,90,100 The valid range for template 2 : 1,5,10,15,20,25,30,35, 40,45,50,55,60,65,70, 75,80,85,90,95,100. When the template of the card changes, either from template 1 to 2 or vice versa the value of this object will be implicitly set to default value. " DEFVAL { fourty } ::= { vismDspGrp 6 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.351.110.3.17.3.6.0 | vismJitterInitialDelay | 0 | 0 | None |
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.351.110.3.17.3.1 | vismEcanCnfIdlePattern | 1 | 1 | Echo Canceller pattern for Idle code. Mu-Law : 1 - 7f, 2 - ff, 3 - 7f or ff, 4 - f7 A-Law : 1 - None, 2 - 54, 3 - 55, 4 - Prog… |
| 1.3.6.1.4.1.351.110.3.17.3.2 | vismEcanCnfIdleDirection | 1 | 1 | Echo Canceller Idle Direction. This determines in which direction the Idle code must be present. |
| 1.3.6.1.4.1.351.110.3.17.3.3 | vismCompCnfPacketSize | 1 | 1 | Compressed output packet size - This value is used in the DSP(Digital Signal Processing) interface API commands to configure the … |
| 1.3.6.1.4.1.351.110.3.17.3.4 | vismERL | 1 | 1 | This object is used to provision the return echo lost, i.e the db loss of the echo that the DSPs are supposed to cancel. |
| 1.3.6.1.4.1.351.110.3.17.3.5 | vismJitterDelayMode | 1 | 1 | This object is used to provision the jitter buffer mode to be apply to a call connection. The possible values are: 'fixed' : mea… |
| 1.3.6.1.4.1.351.110.3.17.3.7 | vismAdaptiveGainControl | 1 | 1 | If set to 'on', the DSP will adjust the gain of the call connection to an optimal value. |
| 1.3.6.1.4.1.351.110.3.17.3.8 | vismDspHealth | 1 | 1 | This attribute indicates the health of the DSPs. It is a percentage of the total number of DSPs that are currently functional. |
| 1.3.6.1.4.1.351.110.3.17.3.9 | vismUpspeedCodec | 1 | 1 | This object specifies the codec to be used when fax upspeed happens. The default value for this object is G.711u when the line ty… |
| 1.3.6.1.4.1.351.110.3.17.3.10 | vismPayloadType | 1 | 1 | This object specifies the payload type to be used when fax upspeed happens. IANA values (0..95) are static payload and (96..127) … |
| 1.3.6.1.4.1.351.110.3.17.3.11 | vismDSPHeartbeat | 1 | 1 | This object will specify the timer interval, DSP send a regular heartbeat messages from the DSP to the HOST Application. If the va… |
| 1.3.6.1.4.1.351.110.3.17.3.12 | vismFaxDeJitterMode | 1 | 1 | This object specifies the de-jitter mode to be used for the fax upspeed. This object is applicable only in the case of VoIP applic… |
| 1.3.6.1.4.1.351.110.3.17.3.13 | vismFaxDeJitterInitialDelay | 1 | 1 | This object defines the de-jitter buffer size for fax upspeed. If the vismFaxDeJitter Mode is set to be 'fixedWithTS' or 'fixedWi… |