This object refers to the domain name of the external DNS server
which will be used to resolve other domain name.
Currently this domain name can only be resolved internally.
Therefore, before configuring this object not only
the domain name has to be added in the mgDomainNameTable with
resolution type 'internalOnly' but also at least one IP address
has been added with this domain name in mgcResolutionTable.
Before deleting external DNS server from mgDomainNameTable or
deleting the last IP address associated with the external DNS
server this object should be set to 'NULL'. After we change
the value of this object to NULL, all the externally resolved
IP address in mgcResolutionTable will be purged.
By default this object will be set to 'NULL'.
Parsed from file CISCO-WAN-AXIPOP-MIB.mib
Module: CISCO-WAN-AXIPOP-MIB
This object refers to the domain name of the external
DNS server which will be used to resolve other
domain name.
Currently this domain name can only be resolved
internally. Therefore, before configuring this object
not only the domain name has to be added in the
mgDomainNameTable with resolution type 'internalOnly'
but also at least one IP address has been added with
this domain name in mgcResolutionTable.
Before deleting external DNS server from mgDomainNameTable
or deleting the last IP address associated with the
external DNS server this object should be set to 'NULL'.
After we change the value of this object to NULL, all the
externally resolved IP address in mgcResolutionTable
will be purged.
By default this object will be set to 'NULL'.
This object refers to the domain name of the external
DNS server which will be used to resolve other
domain name.
Currently this domain name can only be resolved
internally. Therefore, before configuring this object
not only the domain name has to be added in the
mgDomainNameTable with resolution type 'internalOnly'
but also at least one IP address has been added with
this domain name in mgcResolutionTable.
Before deleting external DNS server from mgDomainNameTable
or deleting the last IP address associated with the
external DNS server this object should be set to 'NULL'.
After we change the value of this object to NULL, all the
externally resolved IP address in mgcResolutionTable
will be purged.
By default this object will be set to 'NULL'.
Parsed from file CISCO-VISM-MODULE-MIB.my.txt
Company: None
Module: CISCO-VISM-MODULE-MIB
This object refers to the domain name of the external
DNS server which will be used to resolve other
domain name.
Currently this domain name can only be resolved
internally. Therefore, before configuring this object
not only the domain name has to be added in the
mgDomainNameTable with resolution type 'internalOnly'
but also at least one IP address has been added with
this domain name in mgcResolutionTable.
Before deleting external DNS server from mgDomainNameTable
or deleting the last IP address associated with the
external DNS server this object should be set to 'NULL'.
After we change the value of this object to NULL, all the
externally resolved IP address in mgcResolutionTable
will be purged.
By default this object will be set to 'NULL'.
vismExtDnsServerDn OBJECT-TYPE SYNTAX DisplayString (SIZE (1..64)) ACCESS read-write STATUS mandatory DESCRIPTION " This object refers to the domain name of the external DNS server which will be used to resolve other domain name. Currently this domain name can only be resolved internally. Therefore, before configuring this object not only the domain name has to be added in the mgDomainNameTable with resolution type 'internalOnly' but also at least one IP address has been added with this domain name in mgcResolutionTable. Before deleting external DNS server from mgDomainNameTable or deleting the last IP address associated with the external DNS server this object should be set to 'NULL'. After we change the value of this object to NULL, all the externally resolved IP address in mgcResolutionTable will be purged. By default this object will be set to 'NULL'. " ::= { vismSystemGrp 20 }
vismExtDnsServerDn OBJECT-TYPE SYNTAX SnmpAdminString(SIZE(1..64)) ACCESS read-write STATUS mandatory DESCRIPTION "This object refers to the domain name of the external DNS server which will be used to resolve other domain name. Currently this domain name can only be resolved internally. Therefore, before configuring this object not only the domain name has to be added in the mgDomainNameTable with resolution type 'internalOnly' but also at least one IP address has been added with this domain name in mgcResolutionTable. Before deleting external DNS server from mgDomainNameTable or deleting the last IP address associated with the external DNS server this object should be set to 'NULL'. After we change the value of this object to NULL, all the externally resolved IP address in mgcResolutionTable will be purged. By default this object will be set to 'NULL'." ::= { vismSystemGrp 20 }
Vendor: Stratacom
Module: CISCO-VISM-MODULE-MIB
[Automatically extracted from oidview.com]
vismExtDnsServerDn OBJECT-TYPE SYNTAX SnmpAdminString (SIZE (1..64)) MAX-ACCESS read-write STATUS current DESCRIPTION "This object refers to the domain name of the external DNS server which will be used to resolve other domain name. Currently this domain name can only be resolved internally. Therefore, before configuring this object not only the domain name has to be added in the mgDomainNameTable with resolution type 'internalOnly' but also at least one IP address has been added with this domain name in mgcResolutionTable. Before deleting external DNS server from mgDomainNameTable or deleting the last IP address associated with the external DNS server this object should be set to 'NULL'. After we change the value of this object to NULL, all the externally resolved IP address in mgcResolutionTable will be purged. By default this object will be set to 'NULL'. " ::= { vismSystemGrp 20 }
vismExtDnsServerDn OBJECT-TYPE SYNTAX SnmpAdminString (SIZE (1..64)) MAX-ACCESS read-write STATUS current DESCRIPTION "This object refers to the domain name of the external DNS server which will be used to resolve other domain name. Currently this domain name can only be resolved internally. Therefore, before configuring this object not only the domain name has to be added in the mgDomainNameTable with resolution type 'internalOnly' but also at least one IP address has been added with this domain name in mgcResolutionTable. Before deleting external DNS server from mgDomainNameTable or deleting the last IP address associated with the external DNS server this object should be set to 'NULL'. After we change the value of this object to NULL, all the externally resolved IP address in mgcResolutionTable will be purged. By default this object will be set to 'NULL'. " ::= { vismSystemGrp 20 }
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.351.110.3.17.4.20.0 | vismExtDnsServerDn | 0 | 0 | None |
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.351.110.3.17.4.1 | vismDaughterCardSerialNum | 1 | 1 | A unique value for each VISM daughter card, entered in nvram by manf. The serial No. is on the non-volatile RAM on the VISM daugh… |
1.3.6.1.4.1.351.110.3.17.4.2 | vismDaughterCardDescription | 1 | 1 | Describes the VISM daughter card. |
1.3.6.1.4.1.351.110.3.17.4.3 | vismDaughterCardHWRev | 1 | 1 | Hardware revision number for the daughter card. |
1.3.6.1.4.1.351.110.3.17.4.4 | vismEcanEncoding | 1 | 1 | Voice encoding type, Mu-law or A-law. mu-law is returned for T1 lines and a-law is returned for E1 lines. |
1.3.6.1.4.1.351.110.3.17.4.5 | vismMode | 1 | 1 | This attribute defines the connection model that the VISM card is configured to operate with. This object can be modified by CLI(… |
1.3.6.1.4.1.351.110.3.17.4.6 | vismPrevMode | 1 | 1 | This attribute indicates the mode in which VISM was operating before the object vismMode value was changed. i.e It gives the valu… |
1.3.6.1.4.1.351.110.3.17.4.7 | vismCacEnable | 1 | 1 | This attribute describes whether CAC (Connection Admission Control) functionality needs to be applied on the VISM card, on a per… |
1.3.6.1.4.1.351.110.3.17.4.8 | vismAvailableDs0Count | 1 | 1 | This attribute describes the number of DS0s available for new connections on VISM. This is modified by the VISM firmware after ea… |
1.3.6.1.4.1.351.110.3.17.4.9 | vismAppliedTemplate | 1 | 1 | This attribute describes the Codec template currently configured on the VISM card. The value refers to an index to the vismCodecT… |
1.3.6.1.4.1.351.110.3.17.4.11 | vismTftpServerDn | 1 | 1 | This object holds the domain name of the tftp server from where the cas module will download the cas files. This domain name can… |
1.3.6.1.4.1.351.110.3.17.4.12 | vismXgcpBearerNetworkType | 1 | 1 | This object specifies the network type to use in order to transport bearer traffic. The user can configure this to IP or ATM base… |
1.3.6.1.4.1.351.110.3.17.4.13 | vismXgcpBearerVCType | 1 | 1 | This object specifies the VC(Virtual Channel) type to use in order to transport bearer traffic. If the call agent specifies the V… |
1.3.6.1.4.1.351.110.3.17.4.14 | vismXgcpBearerConnectionType | 1 | 1 | This object specifies the connection type used to transport bearer traffic. If the vismXgcpBearerNetworkType is chosen to be IP th… |
1.3.6.1.4.1.351.110.3.17.4.15 | vismBearerContinuityTimer | 1 | 1 | This object specifies the co4 (bearer continuity) timer in millisecs. The timer will be started in the terminating/orginating gate… |
1.3.6.1.4.1.351.110.3.17.4.16 | vismCodecNegotiationOption | 1 | 1 | This object helps in forming an ordered intersection of lists and one of the lists must be used in determining the resulting orde… |
1.3.6.1.4.1.351.110.3.17.4.17 | vismProfileNegotiationOption | 1 | 1 | This object helps in forming an ordered intersection of lists and one of the lists must be used in determining the resulting orde… |
1.3.6.1.4.1.351.110.3.17.4.18 | vismCarrierLossPolicy | 1 | 1 | This object defines the policy that needs to be applied when a carrier loss is detected. This states whether to switch to the pre… |
1.3.6.1.4.1.351.110.3.17.4.19 | vismCacRejectionPolicy | 1 | 1 | This attribute defines the policy that needs to be applied once the CAC function rejects the upspeeding of a connection, due to a… |
1.3.6.1.4.1.351.110.3.17.4.21 | vismFeatureBitMap | 1 | 1 | This object denotes the bit map for VISM features. It indicates the current features that are enabled. It should be consistant wi… |
1.3.6.1.4.1.351.110.3.17.4.22 | vismVADTolerance | 1 | 1 | The value in this object refers to the customer accepted drop rate for voice connections when the bandwidth usage exceeds allowed… |
1.3.6.1.4.1.351.110.3.17.4.23 | vismVADDutyCycle | 1 | 1 | This object refers to the talk-spurts duty cycle. The unit is in percentage. When the value of this object is to be passed to und… |
1.3.6.1.4.1.351.110.3.17.4.24 | vismAggregateTrafficClipping | 1 | 1 | This attribute defines the aggregate traffic clipping policy which is applicable to all bearer traffic generated at VISM card. Th… |
1.3.6.1.4.1.351.110.3.17.4.25 | vismAggregateSvcBandwidth | 1 | 1 | The aggregate svc bandwidth is used for AAL2 SVC aggregate SVC CAC and also used for aggregate traffic clipping at VISM card when… |
1.3.6.1.4.1.351.110.3.17.4.26 | vismBearerContinuityTest | 1 | 1 | This attribute defines whether the bearer continuity test for a connection will be performed at the time of call setup or not. Wh… |
1.3.6.1.4.1.351.110.3.17.4.27 | vismCaleaEnable | 1 | 1 | This attribute describes whether CALEA (Communication Assistance for Law Enforcement Agency) functionality needs to be enabled on… |
1.3.6.1.4.1.351.110.3.17.4.28 | vismMaxConfNum | 1 | 1 | Identify how many conference will be supported on a VISM card |
1.3.6.1.4.1.351.110.3.17.4.29 | vismLongDurationTimer | 1 | 1 | The long duration is the elapse time in hour to indicate a connection has been established for a given period of time. The defaul… |
1.3.6.1.4.1.351.110.3.17.4.30 | vismContinuityCo1Timer | 1 | 1 | A 2010Hz tone is applied, if the co1(Continuity Tone 1) is specify as a signal the range is 2010Hz +/- 8Hz and if it is specify a… |
1.3.6.1.4.1.351.110.3.17.4.31 | vismContinuityCo2Timer | 1 | 1 | A 1780Hz tone is applied, if the co2(Continuity Tone 2) is specify as a signal the range is 1780Hz +/- 20Hz and if it is specify … |
1.3.6.1.4.1.351.110.3.17.4.32 | vismReverseCotTone | 1 | 1 | This attribute defines the direction of COT Tone that is sent in a 2w to 4w arrangement. The VISM responds to a request from the… |
1.3.6.1.4.1.351.110.3.17.4.33 | vismSendDnEnable | 1 | 1 | This will allow VISM to send domain name as part of Audit Enpoint response to the call agent when it is configured as 'true(1)'. |
1.3.6.1.4.1.351.110.3.17.4.34 | vismSendDataGramSize | 1 | 1 | Specify the size of datagram that should be sent when the vismSendDnEnable is set to 'true(1)'. Any value greater than the specif… |
1.3.6.1.4.1.351.110.3.17.4.35 | vismOamLoopThreshold | 1 | 1 | Specify OAM loopback cell loss count before declaring a PVC alarm. |
1.3.6.1.4.1.351.110.3.17.4.36 | vismFreeDs0Threshold | 1 | 1 | This attribute holds the threshold value of free DS0 counts on the VISM card. A trap is sent out if the number of free ds0s fall … |
1.3.6.1.4.1.351.110.3.17.4.37 | vismCPUUtilizationThreshold | 1 | 1 | This attribute holds the threshold value of CPU utilization on the VISM card. A trap is sent out if the CPU utilization equals or… |
1.3.6.1.4.1.351.110.3.17.4.38 | vismMemoryUtilizationThreshold | 1 | 1 | This attribute holds the threshold value of memory utilization on the VISM card. A trap is sent out if the memory utilization equ… |
1.3.6.1.4.1.351.110.3.17.4.39 | vismDualToneDetect | 1 | 1 | This object is use to enable/disable dual tone configuration. When the dual tone is enable and detected, the Marconi Application … |
1.3.6.1.4.1.351.110.3.17.4.40 | vismAisSuppression | 1 | 1 | This object is used to enable/disable the AIS(Alarm Indication Signal) suppression functionality. When AIS suppression is enabled… |
1.3.6.1.4.1.351.110.3.17.4.41 | vismBearerIpPingEnable | 1 | 1 | This object is used to enable/disable the bearer IP ping response configuration. When set to true, the bearer IP ping feature wil… |
1.3.6.1.4.1.351.110.3.17.4.42 | vismTrapFilteringEnable | 1 | 1 | This object is used to enable/disable the trap filtering feature on the module. When set to true, the trap filtering feature is en… |
1.3.6.1.4.1.351.110.3.17.4.43 | vismSplModemToneBitMap | 1 | 1 | This bit map is applicable for any special modem tones that need to be enabled or disabled on the module. If a bit is set to 1, t… |
1.3.6.1.4.1.351.110.3.17.4.44 | vismSSRCEnable | 1 | 1 | This object is used to enable/disable more than one SSRC (Synchronization Source) per RTP session. When set to true, the module w… |
1.3.6.1.4.1.351.110.3.17.4.45 | vismOamLoopbackSetCLP | 1 | 1 | This object is used to set the cell loss priority of the oam loopback cell for all the PVCs. If set to true, all the CLP bits wil… |
1.3.6.1.4.1.351.110.3.17.4.46 | vismPvcAlarmLogEnable | 1 | 1 | This object specifies whether detailed alarm logging on all the PVC's on the module is enabled or disabled. If this object is tru… |
1.3.6.1.4.1.351.110.3.17.4.47 | vismPvcAlarmLogAdminTimer | 1 | 1 | This object specifies the time for which the detailed alarm logging for all the PVCs on the module will remain active. The value i… |
1.3.6.1.4.1.351.110.3.17.4.48 | vismPvcAlarmLogOperTimer | 1 | 1 | This object specifies the time remaining in minutes for which the detailed alarm logging will remain enabled on all the PVCs on t… |
1.3.6.1.4.1.351.110.3.17.4.49 | vismContinuityCheckCellEnable | 1 | 1 | This object is used to enable/disable the continuity check cell for all the PVCs on the module. If set to true, the module will t… |