This attribute defines the connection model that the VISM card
is configured to operate with. This object can be modified by
CLI only. The CLI 'cnfvismmode' can be used to set this object.
VISM card will be reset after modifying this parameter
for the VISM card to come up in the new mode.
Each mode enables a set of features on the VISM card.
The feature set for each of the above modes is :
voipSwitching - VoIP mode. In this mode VISM interacts
with the Call Agent using XGCP protocol,
bearer path is VoIP (AAL5). This mode is also
used for VoIP applications that dosen't use
call agent. (VoIP Trunking)
aal2Trunking - AAL2 Trunking mode. In this mode VISM does not
interact with the Call Agent. Bearer Path is AAL2.
aal1Svc - AAL1 SVC mode. In this mode VISM interacts with
Call Agent using XGCP protocol over AAL5 control
PVCs. In this mode, bearer path is VoAAL1 and the
bearer connections are SVCs. i.e VISM dynamically
sets-up and tears down bearer connections. This
value is applicable in VISM2.0 and onwards.
switchedVoipCASBh, switchedVoipPRIBh, switchedAal2CASBh,
switchedAal2Svc and superMode are ignored.
switchedAal2Pvc - Switched and trunked AAL2 PVC with CAS xGCP
backhaul, CCS and CAS forwarding.
switchedAal2Svc - Switched AAL2 SVC with PRI backhaul.
voipAndAal1Svc - VoIP and ATM Groomer.
unknowMode - Unknown mode, when user change vismFeatureBitMap
to a combination of Features that are not in
the above modes.
This object has to be synchronized with vismFeatureBitMap.
When vismFeatureBitMag is changed this object will be implictly
set to the mode that has the right combination of features.
From Indiana release and onwards, when user change mode VISM
card is not reset and the configuration is not cleared.
Parsed from file CISCO-WAN-AXIPOP-MIB.mib
Module: CISCO-WAN-AXIPOP-MIB
This attribute defines the connection model that
the VISM card is configured to operate with. This
object can be modified by CLI(Command Line Interface)
only. The CLI 'cnfvismmode' can be used to set this
object. VISM card will be reset after modifying
this parameter for the VISM card to come up in the
new mode.
Each mode enables a set of features on the VISM card.
The feature set for each of the above modes is :
'voipSwitching':VoIP mode. In this mode VISM interacts
with the call agent using XGCP protocol,
bearer path is VoIP. This mode is also
used for VoIP applications that dosen't use
call agent(VoIP Trunking).
'aal2Trunking': AAL2 Trunking mode. In this mode VISM does
not interact with the call agent. Bearer
Path is AAL2.
'aal1Svc' : AAL1 SVC(Switched Virtual Circuit) mode.
In this mode VISM interacts with call
agent using XGCP protocol over AAL5
control PVCs. In this mode, bearer
path is VoAAL1 and the bearer
connections are SVCs. i.e VISM dynamically
sets-up and tears down bearer connections.
'switchedVoipCASBh', 'switchedVoipPRIBh',
'switchedAal2CASBh',
'switchedAal2Svc' and superMode are ignored.
'switchedAal2Pvc': Switched and trunked AAL2 PVC with CAS
xGCP backhaul, CCS and CAS forwarding.
'switchedAal2Svc': Switched AAL2 SVC with PRI backhaul.
'voipAndAal1Svc': VoIP and ATM Groomer.
'voipAndAal2Trunking': VoIP Trunking And AAL2 Trunking.
'unknowMode': Unknown mode, when user change
vismFeatureBitMap to a combination of
Features that are not in the above modes.
This object has to be synchronized with
vismFeatureBitMap. When vismFeatureBitMap is
changed this object will be implicitly set to
the mode that has the right combination of features.
This attribute defines the connection model that
the VISM card is configured to operate with. This
object can be modified by CLI(Command Line Interface)
only. The CLI 'cnfvismmode' can be used to set this
object. VISM card will be reset after modifying
this parameter for the VISM card to come up in the
new mode.
Each mode enables a set of features on the VISM card.
The feature set for each of the above modes is :
'voipSwitching':VoIP mode. In this mode VISM interacts
with the call agent using XGCP protocol,
bearer path is VoIP. This mode is also
used for VoIP applications that dosen't use
call agent(VoIP Trunking).
'aal2Trunking': AAL2 Trunking mode. In this mode VISM does
not interact with the call agent. Bearer
Path is AAL2.
'aal1Svc' : AAL1 SVC(Switched Virtual Circuit) mode.
In this mode VISM interacts with call
agent using XGCP protocol over AAL5
control PVCs. In this mode, bearer
path is VoAAL1 and the bearer
connections are SVCs. i.e VISM dynamically
sets-up and tears down bearer connections.
'switchedVoipCASBh', 'switchedVoipPRIBh',
'switchedAal2CASBh',
'switchedAal2Svc' and superMode are ignored.
'switchedAal2Pvc': Switched and trunked AAL2 PVC with CAS
xGCP backhaul, CCS and CAS forwarding.
'switchedAal2Svc': Switched AAL2 SVC with PRI backhaul.
'voipAndAal1Svc': VoIP and ATM Groomer.
'voipAndAal2Trunking': VoIP Trunking And AAL2 Trunking.
'unknowMode': Unknown mode, when user change
vismFeatureBitMap to a combination of
Features that are not in the above modes.
This object has to be synchronized with
vismFeatureBitMap. When vismFeatureBitMap is
changed this object will be implicitly set to
the mode that has the right combination of features.
Parsed from file CISCO-VISM-MODULE-MIB.my.txt
Company: None
Module: CISCO-VISM-MODULE-MIB
This attribute defines the connection model that
the VISM card is configured to operate with. This
object can be modified by CLI(Command Line Interface)
only. The CLI 'cnfvismmode' can be used to set this
object. VISM card will be reset after modifying
this parameter for the VISM card to come up in the
new mode.
Each mode enables a set of features on the VISM card.
The feature set for each of the above modes is :
'voipSwitching':VoIP mode. In this mode VISM interacts
with the call agent using XGCP protocol,
bearer path is VoIP. This mode is also
used for VoIP applications that dosen't use
call agent(VoIP Trunking).
'aal2Trunking': AAL2 Trunking mode. In this mode VISM does
not interact with the call agent. Bearer
Path is AAL2.
'aal1Svc' : AAL1 SVC(Switched Virtual Circuit) mode.
In this mode VISM interacts with call
agent using XGCP protocol over AAL5
control PVCs. In this mode, bearer
path is VoAAL1 and the bearer
connections are SVCs. i.e VISM dynamically
sets-up and tears down bearer connections.
'switchedVoipCASBh', 'switchedVoipPRIBh',
'switchedAal2CASBh',
'switchedAal2Svc' and superMode are ignored.
'switchedAal2Pvc': Switched and trunked AAL2 PVC with CAS
xGCP backhaul, CCS and CAS forwarding.
'switchedAal2Svc': Switched AAL2 SVC with PRI backhaul.
'voipAndAal1Svc': VoIP and ATM Groomer.
'voipAndAal2Trunking': VoIP Trunking And AAL2 Trunking.
'unknowMode': Unknown mode, when user change
vismFeatureBitMap to a combination of
Features that are not in the above modes.
This object has to be synchronized with
vismFeatureBitMap. When vismFeatureBitMap is
changed this object will be implicitly set to
the mode that has the right combination of features.
vismMode OBJECT-TYPE SYNTAX INTEGER { voipSwitching (1), aal2Trunking (2), aal1Svc (3), switchedVoipCASBh (4), switchedVoipPRIBh (5), switchedAal2CASBh (6), switchedAal2Svc (7), switchedAal2Pvc (8), voipAndAal1Svc (9), superMode (99), unknownMode (100) } ACCESS read-only STATUS mandatory DESCRIPTION " This attribute defines the connection model that the VISM card is configured to operate with. This object can be modified by CLI only. The CLI 'cnfvismmode' can be used to set this object. VISM card will be reset after modifying this parameter for the VISM card to come up in the new mode. Each mode enables a set of features on the VISM card. The feature set for each of the above modes is : voipSwitching - VoIP mode. In this mode VISM interacts with the Call Agent using XGCP protocol, bearer path is VoIP (AAL5). This mode is also used for VoIP applications that dosen't use call agent. (VoIP Trunking) aal2Trunking - AAL2 Trunking mode. In this mode VISM does not interact with the Call Agent. Bearer Path is AAL2. aal1Svc - AAL1 SVC mode. In this mode VISM interacts with Call Agent using XGCP protocol over AAL5 control PVCs. In this mode, bearer path is VoAAL1 and the bearer connections are SVCs. i.e VISM dynamically sets-up and tears down bearer connections. This value is applicable in VISM2.0 and onwards. switchedVoipCASBh, switchedVoipPRIBh, switchedAal2CASBh, switchedAal2Svc and superMode are ignored. switchedAal2Pvc - Switched and trunked AAL2 PVC with CAS xGCP backhaul, CCS and CAS forwarding. switchedAal2Svc - Switched AAL2 SVC with PRI backhaul. voipAndAal1Svc - VoIP and ATM Groomer. unknowMode - Unknown mode, when user change vismFeatureBitMap to a combination of Features that are not in the above modes. This object has to be synchronized with vismFeatureBitMap. When vismFeatureBitMag is changed this object will be implictly set to the mode that has the right combination of features. From Indiana release and onwards, when user change mode VISM card is not reset and the configuration is not cleared. " DEFVAL { voipSwitching } ::= { vismSystemGrp 5 }
vismMode OBJECT-TYPE SYNTAX INTEGER { voipSwitching(1), aal2Trunking(2), aal1Svc(3), switchedVoipCASBh(4), switchedVoipPRIBh(5), switchedAal2CASBh(6), switchedAal2Svc(7), switchedAal2Pvc(8), voipAndAal1Svc(9), voipAndAal2Trunking(10), superMode(99), unknownMode(100) } ACCESS read-only STATUS mandatory DESCRIPTION " This attribute defines the connection model that the VISM card is configured to operate with. This object can be modified by CLI(Command Line Interface) only. The CLI 'cnfvismmode' can be used to set this object. VISM card will be reset after modifying this parameter for the VISM card to come up in the new mode. Each mode enables a set of features on the VISM card. The feature set for each of the above modes is : 'voipSwitching':VoIP mode. In this mode VISM interacts with the call agent using XGCP protocol, bearer path is VoIP. This mode is also used for VoIP applications that dosen't use call agent(VoIP Trunking). 'aal2Trunking': AAL2 Trunking mode. In this mode VISM does not interact with the call agent. Bearer Path is AAL2. 'aal1Svc' : AAL1 SVC(Switched Virtual Circuit) mode. In this mode VISM interacts with call agent using XGCP protocol over AAL5 control PVCs. In this mode, bearer path is VoAAL1 and the bearer connections are SVCs. i.e VISM dynamically sets-up and tears down bearer connections. 'switchedVoipCASBh', 'switchedVoipPRIBh', 'switchedAal2CASBh', 'switchedAal2Svc' and superMode are ignored. 'switchedAal2Pvc': Switched and trunked AAL2 PVC with CAS xGCP backhaul, CCS and CAS forwarding. 'switchedAal2Svc': Switched AAL2 SVC with PRI backhaul. 'voipAndAal1Svc': VoIP and ATM Groomer. 'voipAndAal2Trunking': VoIP Trunking And AAL2 Trunking. 'unknowMode': Unknown mode, when user change vismFeatureBitMap to a combination of Features that are not in the above modes. This object has to be synchronized with vismFeatureBitMap. When vismFeatureBitMap is changed this object will be implicitly set to the mode that has the right combination of features." DEFVAL { voipSwitching } ::= { vismSystemGrp 5 }
Vendor: Stratacom
Module: CISCO-VISM-MODULE-MIB
[Automatically extracted from oidview.com]
vismMode OBJECT-TYPE SYNTAX INTEGER { voipSwitching (1), aal2Trunking (2), aal1Svc (3), switchedVoipCASBh (4), switchedVoipPRIBh (5), switchedAal2CASBh (6), switchedAal2Svc (7), switchedAal2Pvc (8), voipAndAal1Svc (9), voipAndAal2Trunking (10), superMode (99), unknownMode (100) } MAX-ACCESS read-only STATUS current DESCRIPTION " This attribute defines the connection model that the VISM card is configured to operate with. This object can be modified by CLI(Command Line Interface) only. The CLI 'cnfvismmode' can be used to set this object. VISM card will be reset after modifying this parameter for the VISM card to come up in the new mode. Each mode enables a set of features on the VISM card. The feature set for each of the above modes is : 'voipSwitching':VoIP mode. In this mode VISM interacts with the call agent using XGCP protocol, bearer path is VoIP. This mode is also used for VoIP applications that dosen't use call agent(VoIP Trunking). 'aal2Trunking': AAL2 Trunking mode. In this mode VISM does not interact with the call agent. Bearer Path is AAL2. 'aal1Svc' : AAL1 SVC(Switched Virtual Circuit) mode. In this mode VISM interacts with call agent using XGCP protocol over AAL5 control PVCs. In this mode, bearer path is VoAAL1 and the bearer connections are SVCs. i.e VISM dynamically sets-up and tears down bearer connections. 'switchedVoipCASBh', 'switchedVoipPRIBh', 'switchedAal2CASBh', 'switchedAal2Svc' and superMode are ignored. 'switchedAal2Pvc': Switched and trunked AAL2 PVC with CAS xGCP backhaul, CCS and CAS forwarding. 'switchedAal2Svc': Switched AAL2 SVC with PRI backhaul. 'voipAndAal1Svc': VoIP and ATM Groomer. 'voipAndAal2Trunking': VoIP Trunking And AAL2 Trunking. 'unknowMode': Unknown mode, when user change vismFeatureBitMap to a combination of Features that are not in the above modes. This object has to be synchronized with vismFeatureBitMap. When vismFeatureBitMap is changed this object will be implicitly set to the mode that has the right combination of features. " DEFVAL { voipSwitching } ::= { vismSystemGrp 5 }
vismMode OBJECT-TYPE SYNTAX INTEGER { voipSwitching (1), aal2Trunking (2), aal1Svc (3), switchedVoipCASBh (4), switchedVoipPRIBh (5), switchedAal2CASBh (6), switchedAal2Svc (7), switchedAal2Pvc (8), voipAndAal1Svc (9), voipAndAal2Trunking (10), superMode (99), unknownMode (100) } MAX-ACCESS read-only STATUS current DESCRIPTION " This attribute defines the connection model that the VISM card is configured to operate with. This object can be modified by CLI(Command Line Interface) only. The CLI 'cnfvismmode' can be used to set this object. VISM card will be reset after modifying this parameter for the VISM card to come up in the new mode. Each mode enables a set of features on the VISM card. The feature set for each of the above modes is : 'voipSwitching':VoIP mode. In this mode VISM interacts with the call agent using XGCP protocol, bearer path is VoIP. This mode is also used for VoIP applications that dosen't use call agent(VoIP Trunking). 'aal2Trunking': AAL2 Trunking mode. In this mode VISM does not interact with the call agent. Bearer Path is AAL2. 'aal1Svc' : AAL1 SVC(Switched Virtual Circuit) mode. In this mode VISM interacts with call agent using XGCP protocol over AAL5 control PVCs. In this mode, bearer path is VoAAL1 and the bearer connections are SVCs. i.e VISM dynamically sets-up and tears down bearer connections. 'switchedVoipCASBh', 'switchedVoipPRIBh', 'switchedAal2CASBh', 'switchedAal2Svc' and superMode are ignored. 'switchedAal2Pvc': Switched and trunked AAL2 PVC with CAS xGCP backhaul, CCS and CAS forwarding. 'switchedAal2Svc': Switched AAL2 SVC with PRI backhaul. 'voipAndAal1Svc': VoIP and ATM Groomer. 'voipAndAal2Trunking': VoIP Trunking And AAL2 Trunking. 'unknowMode': Unknown mode, when user change vismFeatureBitMap to a combination of Features that are not in the above modes. This object has to be synchronized with vismFeatureBitMap. When vismFeatureBitMap is changed this object will be implicitly set to the mode that has the right combination of features. " DEFVAL { voipSwitching } ::= { vismSystemGrp 5 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.351.110.3.17.4.5.0 | vismMode | 0 | 0 | None |
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.351.110.3.17.4.1 | vismDaughterCardSerialNum | 1 | 1 | A unique value for each VISM daughter card, entered in nvram by manf. The serial No. is on the non-volatile RAM on the VISM daugh… |
| 1.3.6.1.4.1.351.110.3.17.4.2 | vismDaughterCardDescription | 1 | 1 | Describes the VISM daughter card. |
| 1.3.6.1.4.1.351.110.3.17.4.3 | vismDaughterCardHWRev | 1 | 1 | Hardware revision number for the daughter card. |
| 1.3.6.1.4.1.351.110.3.17.4.4 | vismEcanEncoding | 1 | 1 | Voice encoding type, Mu-law or A-law. mu-law is returned for T1 lines and a-law is returned for E1 lines. |
| 1.3.6.1.4.1.351.110.3.17.4.6 | vismPrevMode | 1 | 1 | This attribute indicates the mode in which VISM was operating before the object vismMode value was changed. i.e It gives the valu… |
| 1.3.6.1.4.1.351.110.3.17.4.7 | vismCacEnable | 1 | 1 | This attribute describes whether CAC (Connection Admission Control) functionality needs to be applied on the VISM card, on a per… |
| 1.3.6.1.4.1.351.110.3.17.4.8 | vismAvailableDs0Count | 1 | 1 | This attribute describes the number of DS0s available for new connections on VISM. This is modified by the VISM firmware after ea… |
| 1.3.6.1.4.1.351.110.3.17.4.9 | vismAppliedTemplate | 1 | 1 | This attribute describes the Codec template currently configured on the VISM card. The value refers to an index to the vismCodecT… |
| 1.3.6.1.4.1.351.110.3.17.4.11 | vismTftpServerDn | 1 | 1 | This object holds the domain name of the tftp server from where the cas module will download the cas files. This domain name can… |
| 1.3.6.1.4.1.351.110.3.17.4.12 | vismXgcpBearerNetworkType | 1 | 1 | This object specifies the network type to use in order to transport bearer traffic. The user can configure this to IP or ATM base… |
| 1.3.6.1.4.1.351.110.3.17.4.13 | vismXgcpBearerVCType | 1 | 1 | This object specifies the VC(Virtual Channel) type to use in order to transport bearer traffic. If the call agent specifies the V… |
| 1.3.6.1.4.1.351.110.3.17.4.14 | vismXgcpBearerConnectionType | 1 | 1 | This object specifies the connection type used to transport bearer traffic. If the vismXgcpBearerNetworkType is chosen to be IP th… |
| 1.3.6.1.4.1.351.110.3.17.4.15 | vismBearerContinuityTimer | 1 | 1 | This object specifies the co4 (bearer continuity) timer in millisecs. The timer will be started in the terminating/orginating gate… |
| 1.3.6.1.4.1.351.110.3.17.4.16 | vismCodecNegotiationOption | 1 | 1 | This object helps in forming an ordered intersection of lists and one of the lists must be used in determining the resulting orde… |
| 1.3.6.1.4.1.351.110.3.17.4.17 | vismProfileNegotiationOption | 1 | 1 | This object helps in forming an ordered intersection of lists and one of the lists must be used in determining the resulting orde… |
| 1.3.6.1.4.1.351.110.3.17.4.18 | vismCarrierLossPolicy | 1 | 1 | This object defines the policy that needs to be applied when a carrier loss is detected. This states whether to switch to the pre… |
| 1.3.6.1.4.1.351.110.3.17.4.19 | vismCacRejectionPolicy | 1 | 1 | This attribute defines the policy that needs to be applied once the CAC function rejects the upspeeding of a connection, due to a… |
| 1.3.6.1.4.1.351.110.3.17.4.20 | vismExtDnsServerDn | 1 | 1 | This object refers to the domain name of the external DNS server which will be used to resolve other domain name. Currently this… |
| 1.3.6.1.4.1.351.110.3.17.4.21 | vismFeatureBitMap | 1 | 1 | This object denotes the bit map for VISM features. It indicates the current features that are enabled. It should be consistant wi… |
| 1.3.6.1.4.1.351.110.3.17.4.22 | vismVADTolerance | 1 | 1 | The value in this object refers to the customer accepted drop rate for voice connections when the bandwidth usage exceeds allowed… |
| 1.3.6.1.4.1.351.110.3.17.4.23 | vismVADDutyCycle | 1 | 1 | This object refers to the talk-spurts duty cycle. The unit is in percentage. When the value of this object is to be passed to und… |
| 1.3.6.1.4.1.351.110.3.17.4.24 | vismAggregateTrafficClipping | 1 | 1 | This attribute defines the aggregate traffic clipping policy which is applicable to all bearer traffic generated at VISM card. Th… |
| 1.3.6.1.4.1.351.110.3.17.4.25 | vismAggregateSvcBandwidth | 1 | 1 | The aggregate svc bandwidth is used for AAL2 SVC aggregate SVC CAC and also used for aggregate traffic clipping at VISM card when… |
| 1.3.6.1.4.1.351.110.3.17.4.26 | vismBearerContinuityTest | 1 | 1 | This attribute defines whether the bearer continuity test for a connection will be performed at the time of call setup or not. Wh… |
| 1.3.6.1.4.1.351.110.3.17.4.27 | vismCaleaEnable | 1 | 1 | This attribute describes whether CALEA (Communication Assistance for Law Enforcement Agency) functionality needs to be enabled on… |
| 1.3.6.1.4.1.351.110.3.17.4.28 | vismMaxConfNum | 1 | 1 | Identify how many conference will be supported on a VISM card |
| 1.3.6.1.4.1.351.110.3.17.4.29 | vismLongDurationTimer | 1 | 1 | The long duration is the elapse time in hour to indicate a connection has been established for a given period of time. The defaul… |
| 1.3.6.1.4.1.351.110.3.17.4.30 | vismContinuityCo1Timer | 1 | 1 | A 2010Hz tone is applied, if the co1(Continuity Tone 1) is specify as a signal the range is 2010Hz +/- 8Hz and if it is specify a… |
| 1.3.6.1.4.1.351.110.3.17.4.31 | vismContinuityCo2Timer | 1 | 1 | A 1780Hz tone is applied, if the co2(Continuity Tone 2) is specify as a signal the range is 1780Hz +/- 20Hz and if it is specify … |
| 1.3.6.1.4.1.351.110.3.17.4.32 | vismReverseCotTone | 1 | 1 | This attribute defines the direction of COT Tone that is sent in a 2w to 4w arrangement. The VISM responds to a request from the… |
| 1.3.6.1.4.1.351.110.3.17.4.33 | vismSendDnEnable | 1 | 1 | This will allow VISM to send domain name as part of Audit Enpoint response to the call agent when it is configured as 'true(1)'. |
| 1.3.6.1.4.1.351.110.3.17.4.34 | vismSendDataGramSize | 1 | 1 | Specify the size of datagram that should be sent when the vismSendDnEnable is set to 'true(1)'. Any value greater than the specif… |
| 1.3.6.1.4.1.351.110.3.17.4.35 | vismOamLoopThreshold | 1 | 1 | Specify OAM loopback cell loss count before declaring a PVC alarm. |
| 1.3.6.1.4.1.351.110.3.17.4.36 | vismFreeDs0Threshold | 1 | 1 | This attribute holds the threshold value of free DS0 counts on the VISM card. A trap is sent out if the number of free ds0s fall … |
| 1.3.6.1.4.1.351.110.3.17.4.37 | vismCPUUtilizationThreshold | 1 | 1 | This attribute holds the threshold value of CPU utilization on the VISM card. A trap is sent out if the CPU utilization equals or… |
| 1.3.6.1.4.1.351.110.3.17.4.38 | vismMemoryUtilizationThreshold | 1 | 1 | This attribute holds the threshold value of memory utilization on the VISM card. A trap is sent out if the memory utilization equ… |
| 1.3.6.1.4.1.351.110.3.17.4.39 | vismDualToneDetect | 1 | 1 | This object is use to enable/disable dual tone configuration. When the dual tone is enable and detected, the Marconi Application … |
| 1.3.6.1.4.1.351.110.3.17.4.40 | vismAisSuppression | 1 | 1 | This object is used to enable/disable the AIS(Alarm Indication Signal) suppression functionality. When AIS suppression is enabled… |
| 1.3.6.1.4.1.351.110.3.17.4.41 | vismBearerIpPingEnable | 1 | 1 | This object is used to enable/disable the bearer IP ping response configuration. When set to true, the bearer IP ping feature wil… |
| 1.3.6.1.4.1.351.110.3.17.4.42 | vismTrapFilteringEnable | 1 | 1 | This object is used to enable/disable the trap filtering feature on the module. When set to true, the trap filtering feature is en… |
| 1.3.6.1.4.1.351.110.3.17.4.43 | vismSplModemToneBitMap | 1 | 1 | This bit map is applicable for any special modem tones that need to be enabled or disabled on the module. If a bit is set to 1, t… |
| 1.3.6.1.4.1.351.110.3.17.4.44 | vismSSRCEnable | 1 | 1 | This object is used to enable/disable more than one SSRC (Synchronization Source) per RTP session. When set to true, the module w… |
| 1.3.6.1.4.1.351.110.3.17.4.45 | vismOamLoopbackSetCLP | 1 | 1 | This object is used to set the cell loss priority of the oam loopback cell for all the PVCs. If set to true, all the CLP bits wil… |
| 1.3.6.1.4.1.351.110.3.17.4.46 | vismPvcAlarmLogEnable | 1 | 1 | This object specifies whether detailed alarm logging on all the PVC's on the module is enabled or disabled. If this object is tru… |
| 1.3.6.1.4.1.351.110.3.17.4.47 | vismPvcAlarmLogAdminTimer | 1 | 1 | This object specifies the time for which the detailed alarm logging for all the PVCs on the module will remain active. The value i… |
| 1.3.6.1.4.1.351.110.3.17.4.48 | vismPvcAlarmLogOperTimer | 1 | 1 | This object specifies the time remaining in minutes for which the detailed alarm logging will remain enabled on all the PVCs on t… |
| 1.3.6.1.4.1.351.110.3.17.4.49 | vismContinuityCheckCellEnable | 1 | 1 | This object is used to enable/disable the continuity check cell for all the PVCs on the module. If set to true, the module will t… |