vismSystemGrp OBJECT IDENTIFIER ::= {vismConfig 4}
vismSystemGrp OBJECT IDENTIFIER ::= { vismConfig 4 }
Vendor: Stratacom
Module: CISCO-VISM-MODULE-MIB
[Automatically extracted from oidview.com]
vismSystemGrp OBJECT IDENTIFIER ::= { vismConfig 4 }
vismSystemGrp OBJECT IDENTIFIER ::= { vismConfig 4 }
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.351.110.3.17.4.1 | vismDaughterCardSerialNum | 1 | 1 | A unique value for each VISM daughter card, entered in nvram by manf. The serial No. is on the non-volatile RAM on the VISM daugh… |
1.3.6.1.4.1.351.110.3.17.4.2 | vismDaughterCardDescription | 1 | 1 | Describes the VISM daughter card. |
1.3.6.1.4.1.351.110.3.17.4.3 | vismDaughterCardHWRev | 1 | 1 | Hardware revision number for the daughter card. |
1.3.6.1.4.1.351.110.3.17.4.4 | vismEcanEncoding | 1 | 1 | Voice encoding type, Mu-law or A-law. mu-law is returned for T1 lines and a-law is returned for E1 lines. |
1.3.6.1.4.1.351.110.3.17.4.5 | vismMode | 1 | 1 | This attribute defines the connection model that the VISM card is configured to operate with. This object can be modified by CLI(… |
1.3.6.1.4.1.351.110.3.17.4.6 | vismPrevMode | 1 | 1 | This attribute indicates the mode in which VISM was operating before the object vismMode value was changed. i.e It gives the valu… |
1.3.6.1.4.1.351.110.3.17.4.7 | vismCacEnable | 1 | 1 | This attribute describes whether CAC (Connection Admission Control) functionality needs to be applied on the VISM card, on a per… |
1.3.6.1.4.1.351.110.3.17.4.8 | vismAvailableDs0Count | 1 | 1 | This attribute describes the number of DS0s available for new connections on VISM. This is modified by the VISM firmware after ea… |
1.3.6.1.4.1.351.110.3.17.4.9 | vismAppliedTemplate | 1 | 1 | This attribute describes the Codec template currently configured on the VISM card. The value refers to an index to the vismCodecT… |
1.3.6.1.4.1.351.110.3.17.4.11 | vismTftpServerDn | 1 | 1 | This object holds the domain name of the tftp server from where the cas module will download the cas files. This domain name can… |
1.3.6.1.4.1.351.110.3.17.4.12 | vismXgcpBearerNetworkType | 1 | 1 | This object specifies the network type to use in order to transport bearer traffic. The user can configure this to IP or ATM base… |
1.3.6.1.4.1.351.110.3.17.4.13 | vismXgcpBearerVCType | 1 | 1 | This object specifies the VC(Virtual Channel) type to use in order to transport bearer traffic. If the call agent specifies the V… |
1.3.6.1.4.1.351.110.3.17.4.14 | vismXgcpBearerConnectionType | 1 | 1 | This object specifies the connection type used to transport bearer traffic. If the vismXgcpBearerNetworkType is chosen to be IP th… |
1.3.6.1.4.1.351.110.3.17.4.15 | vismBearerContinuityTimer | 1 | 1 | This object specifies the co4 (bearer continuity) timer in millisecs. The timer will be started in the terminating/orginating gate… |
1.3.6.1.4.1.351.110.3.17.4.16 | vismCodecNegotiationOption | 1 | 1 | This object helps in forming an ordered intersection of lists and one of the lists must be used in determining the resulting orde… |
1.3.6.1.4.1.351.110.3.17.4.17 | vismProfileNegotiationOption | 1 | 1 | This object helps in forming an ordered intersection of lists and one of the lists must be used in determining the resulting orde… |
1.3.6.1.4.1.351.110.3.17.4.18 | vismCarrierLossPolicy | 1 | 1 | This object defines the policy that needs to be applied when a carrier loss is detected. This states whether to switch to the pre… |
1.3.6.1.4.1.351.110.3.17.4.19 | vismCacRejectionPolicy | 1 | 1 | This attribute defines the policy that needs to be applied once the CAC function rejects the upspeeding of a connection, due to a… |
1.3.6.1.4.1.351.110.3.17.4.20 | vismExtDnsServerDn | 1 | 1 | This object refers to the domain name of the external DNS server which will be used to resolve other domain name. Currently this… |
1.3.6.1.4.1.351.110.3.17.4.21 | vismFeatureBitMap | 1 | 1 | This object denotes the bit map for VISM features. It indicates the current features that are enabled. It should be consistant wi… |
1.3.6.1.4.1.351.110.3.17.4.22 | vismVADTolerance | 1 | 1 | The value in this object refers to the customer accepted drop rate for voice connections when the bandwidth usage exceeds allowed… |
1.3.6.1.4.1.351.110.3.17.4.23 | vismVADDutyCycle | 1 | 1 | This object refers to the talk-spurts duty cycle. The unit is in percentage. When the value of this object is to be passed to und… |
1.3.6.1.4.1.351.110.3.17.4.24 | vismAggregateTrafficClipping | 1 | 1 | This attribute defines the aggregate traffic clipping policy which is applicable to all bearer traffic generated at VISM card. Th… |
1.3.6.1.4.1.351.110.3.17.4.25 | vismAggregateSvcBandwidth | 1 | 1 | The aggregate svc bandwidth is used for AAL2 SVC aggregate SVC CAC and also used for aggregate traffic clipping at VISM card when… |
1.3.6.1.4.1.351.110.3.17.4.26 | vismBearerContinuityTest | 1 | 1 | This attribute defines whether the bearer continuity test for a connection will be performed at the time of call setup or not. Wh… |
1.3.6.1.4.1.351.110.3.17.4.27 | vismCaleaEnable | 1 | 1 | This attribute describes whether CALEA (Communication Assistance for Law Enforcement Agency) functionality needs to be enabled on… |
1.3.6.1.4.1.351.110.3.17.4.28 | vismMaxConfNum | 1 | 1 | Identify how many conference will be supported on a VISM card |
1.3.6.1.4.1.351.110.3.17.4.29 | vismLongDurationTimer | 1 | 1 | The long duration is the elapse time in hour to indicate a connection has been established for a given period of time. The defaul… |
1.3.6.1.4.1.351.110.3.17.4.30 | vismContinuityCo1Timer | 1 | 1 | A 2010Hz tone is applied, if the co1(Continuity Tone 1) is specify as a signal the range is 2010Hz +/- 8Hz and if it is specify a… |
1.3.6.1.4.1.351.110.3.17.4.31 | vismContinuityCo2Timer | 1 | 1 | A 1780Hz tone is applied, if the co2(Continuity Tone 2) is specify as a signal the range is 1780Hz +/- 20Hz and if it is specify … |
1.3.6.1.4.1.351.110.3.17.4.32 | vismReverseCotTone | 1 | 1 | This attribute defines the direction of COT Tone that is sent in a 2w to 4w arrangement. The VISM responds to a request from the… |
1.3.6.1.4.1.351.110.3.17.4.33 | vismSendDnEnable | 1 | 1 | This will allow VISM to send domain name as part of Audit Enpoint response to the call agent when it is configured as 'true(1)'. |
1.3.6.1.4.1.351.110.3.17.4.34 | vismSendDataGramSize | 1 | 1 | Specify the size of datagram that should be sent when the vismSendDnEnable is set to 'true(1)'. Any value greater than the specif… |
1.3.6.1.4.1.351.110.3.17.4.35 | vismOamLoopThreshold | 1 | 1 | Specify OAM loopback cell loss count before declaring a PVC alarm. |
1.3.6.1.4.1.351.110.3.17.4.36 | vismFreeDs0Threshold | 1 | 1 | This attribute holds the threshold value of free DS0 counts on the VISM card. A trap is sent out if the number of free ds0s fall … |
1.3.6.1.4.1.351.110.3.17.4.37 | vismCPUUtilizationThreshold | 1 | 1 | This attribute holds the threshold value of CPU utilization on the VISM card. A trap is sent out if the CPU utilization equals or… |
1.3.6.1.4.1.351.110.3.17.4.38 | vismMemoryUtilizationThreshold | 1 | 1 | This attribute holds the threshold value of memory utilization on the VISM card. A trap is sent out if the memory utilization equ… |
1.3.6.1.4.1.351.110.3.17.4.39 | vismDualToneDetect | 1 | 1 | This object is use to enable/disable dual tone configuration. When the dual tone is enable and detected, the Marconi Application … |
1.3.6.1.4.1.351.110.3.17.4.40 | vismAisSuppression | 1 | 1 | This object is used to enable/disable the AIS(Alarm Indication Signal) suppression functionality. When AIS suppression is enabled… |
1.3.6.1.4.1.351.110.3.17.4.41 | vismBearerIpPingEnable | 1 | 1 | This object is used to enable/disable the bearer IP ping response configuration. When set to true, the bearer IP ping feature wil… |
1.3.6.1.4.1.351.110.3.17.4.42 | vismTrapFilteringEnable | 1 | 1 | This object is used to enable/disable the trap filtering feature on the module. When set to true, the trap filtering feature is en… |
1.3.6.1.4.1.351.110.3.17.4.43 | vismSplModemToneBitMap | 1 | 1 | This bit map is applicable for any special modem tones that need to be enabled or disabled on the module. If a bit is set to 1, t… |
1.3.6.1.4.1.351.110.3.17.4.44 | vismSSRCEnable | 1 | 1 | This object is used to enable/disable more than one SSRC (Synchronization Source) per RTP session. When set to true, the module w… |
1.3.6.1.4.1.351.110.3.17.4.45 | vismOamLoopbackSetCLP | 1 | 1 | This object is used to set the cell loss priority of the oam loopback cell for all the PVCs. If set to true, all the CLP bits wil… |
1.3.6.1.4.1.351.110.3.17.4.46 | vismPvcAlarmLogEnable | 1 | 1 | This object specifies whether detailed alarm logging on all the PVC's on the module is enabled or disabled. If this object is tru… |
1.3.6.1.4.1.351.110.3.17.4.47 | vismPvcAlarmLogAdminTimer | 1 | 1 | This object specifies the time for which the detailed alarm logging for all the PVCs on the module will remain active. The value i… |
1.3.6.1.4.1.351.110.3.17.4.48 | vismPvcAlarmLogOperTimer | 1 | 1 | This object specifies the time remaining in minutes for which the detailed alarm logging will remain enabled on all the PVCs on t… |
1.3.6.1.4.1.351.110.3.17.4.49 | vismContinuityCheckCellEnable | 1 | 1 | This object is used to enable/disable the continuity check cell for all the PVCs on the module. If set to true, the module will t… |
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.351.110.3.17.1 | vismIpGrp | 5 | 10 | None |
1.3.6.1.4.1.351.110.3.17.2 | vismVoIpGrp | 16 | 32 | None |
1.3.6.1.4.1.351.110.3.17.3 | vismDspGrp | 13 | 26 | None |
1.3.6.1.4.1.351.110.3.17.5 | vismTrapObjGrp | 5 | 10 | None |
1.3.6.1.4.1.351.110.3.17.6 | vismAal2Grp | 6 | 12 | None |
1.3.6.1.4.1.351.110.3.17.7 | vismInteropGrp | 2 | 4 | None |